• 제목/요약/키워드: Medical Device Control System

검색결과 146건 처리시간 0.024초

위상동기루프 방식을 이용한 고빈도 JET환기장치의 설계에 관한 연구 (A Study on the Design of High-Frequency Jet Ventilator Using PLL system)

  • 이준하;정재천
    • Journal of Yeungnam Medical Science
    • /
    • 제6권2호
    • /
    • pp.63-70
    • /
    • 1989
  • This paper describes to design and to examine the mechanical characteristics of high frequency jet ventilator. The device consists of Phase lock loop(PLL) system, solenoid valve driving control part and Air regulating system. This study is carried out by changing several factors such as endotracheal tube(E.T. tube)diameter, injector cannula diameter, 1%, and frequency(breaths/mim.) having direct effects on the gas exchange as well as parameters of the entrained gas by venturi effects, so as to measure the tidal volume and minute volume. This system characteristics were as follows : 1) Frequency : 6-594bpm 2) Inspiration time : 1-99% 3) Variance of input air pressure : 1-30PSI.

  • PDF

자동 주행기능을 지닌 전동 휠체어의 주행시스템에 관한 연구 (A study on auto locomotion system of a electric wheelchair)

  • 정상봉;한영환;최창순;정동명;홍승홍
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1989년도 춘계학술대회
    • /
    • pp.77-80
    • /
    • 1989
  • This paper describes a study on the locomotion control system for a indoor-use mobile wheelchair. Three lode of operations - BASIC, AUTOMATIC and PROGRAMMED - are employed as basic algorithm building block. One-chip microcomputer 8031 is dominating the control of actuation part and it can control the range of rotating speed of the wheel both right and left by servo motor. Keyboard is employed as a command input device. This system is intended to improve the daily life of the disabled by the intelligent interactive operation scheme.

  • PDF

진단용 엑스선 장치의 안전관리 검사에 관한 연구 (A Study on Safety Management Inspection of Diagnostic X-ray System)

  • 이후민;김현주
    • 한국방사선학회논문지
    • /
    • 제12권7호
    • /
    • pp.887-893
    • /
    • 2018
  • 본 연구는 병원 및 대학교 등에 설치된 X선 발생장치를 대상으로 진단용 방사선 발생장치의 품질관리 항목을 적용하여 성능 비교를 하여 주기적인 성능관리의 중요성을 인식시켜 성능유지 및 관리에 도움을 주고자 한다. 우선 재현성 및 직선성 실험결과 모든 실험조건에서 합격기준에 부합되었으며 주기적인 정도관리가 부족한 GX-650장치의 경우 재현성 평가의 백분율 오차가 높았으며 직선성 평가에서는 관전압을 100 kVp로 설정 시 0.105로 백분율 오차에서 벗어나게 측정되었다. 또한 관전압 및 관전류의 정확도 평가결과 상대적으로 X선 발생횟수가 낮은 장치에서 백분율 오차가 낮은 것을 알 수 있었다. 반가층 실험은 모든 장치에서 관전압 별 반가층 기준에 모두 포함되었다. 따라서 병원용, 실습용 구분보다는 모든 장치의 정도관리의 중요성을 인식하고 적극적으로 장치의 성능관리를 시행하여 장치를 유지 관리해야 할 것이며 특수의료장비처럼 짧은 주기의 정도관리 제도를 마련해야 할 것으로 사료된다.

맥진기 컨텐츠 개발을 위한 통합 데이터베이스 설계 및 구축 (Design and Construction of Integrated Database for Contents Development of Pulse Analysis System)

  • 소지호;전영주
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권5호
    • /
    • pp.137-142
    • /
    • 2017
  • 인구의 고령화와 의료서비스 수요의 증가로 한의학의 이론을 기초로 한 의료기기 개발이 증가하고 있다. 개발한 의료기기의 임상적 유효성 확보를 위한 다양한 임상시험들이 수행되고 있으며, 이 과정에서 다양하게 수집되는 정보들의 체계적인 관리의 중요성이 증가하고 있다. 본 논문에서는 한의학의 대표적인 진단 방법인 맥진을 기기화 한 맥진기를 이용하여 임상시험을 진행하는데 있어 환자의 의학적 정보, 맥진기의 측정 정보들을 체계적으로 관리할 수 있는 데이터베이스를 설계하고 구축하였다. 구축된 데이터베이스는 임상시험에 대한 다양한 정보 및 측정된 정보의 질관리를 통해 기존 알고리즘 검증 또는 새로운 알고리즘 개발 시 효율적인 대응이 가능하고, 임상 데이터의 통제 측면에서도 여러 장점들을 가지고 있다. 본 연구의 결과는 이종의 맥진기나 다른 생체신호 측정기와의 정보 공유가 가능한 통합 데이터베이스 관리 시스템 구축을 위한 한의 의료기기 데이터 표준안 구성에 기여할 수 있을 것이다.

Use of a gesture user interface as a touchless image navigation system in dental surgery: Case series report

  • Rosa, Guillermo M.;Elizondo, Maria L.
    • Imaging Science in Dentistry
    • /
    • 제44권2호
    • /
    • pp.155-160
    • /
    • 2014
  • Purpose: The purposes of this study were to develop a workstation computer that allowed intraoperative touchless control of diagnostic and surgical images by a surgeon, and to report the preliminary experience with the use of the system in a series of cases in which dental surgery was performed. Materials and Methods: A custom workstation with a new motion sensing input device (Leap Motion) was set up in order to use a natural user interface (NUI) to manipulate the imaging software by hand gestures. The system allowed intraoperative touchless control of the surgical images. Results: For the first time in the literature, an NUI system was used for a pilot study during 11 dental surgery procedures including tooth extractions, dental implant placements, and guided bone regeneration. No complications were reported. The system performed very well and was very useful. Conclusion: The proposed system fulfilled the objective of providing touchless access and control of the system of images and a three-dimensional surgical plan, thus allowing the maintenance of sterile conditions. The interaction between surgical staff, under sterile conditions, and computer equipment has been a key issue. The solution with an NUI with touchless control of the images seems to be closer to an ideal. The cost of the sensor system is quite low; this could facilitate its incorporation into the practice of routine dental surgery. This technology has enormous potential in dental surgery and other healthcare specialties.

Mobile Healthcare System Based on Bluetooth Medical Device

  • Kim, Jeong-Heon;Lee, Seung-Chul;Lee, Boon-Giin;Chung, Wan-Young
    • 센서학회지
    • /
    • 제21권4호
    • /
    • pp.241-248
    • /
    • 2012
  • Recently healthcare industry such as pharmaceutical, medical device and healthcare service technology is growing significantly. Mobile healthcare has attracted big attention due to IT convergence technology. Paradigm of healthcare has been changed from the 1st generation(communicable disease prevention) and the 2nd generation(treatment of disease due to extended life expectancy) to the 3rd generation(extended life expectancy due to prevention and control). In our study, we suggest the 3rd generation mobile healthcare system using Bluetooth based wearable ECG monitoring system and smart phone technology. The mobile healthcare system consists of wearable shirts with Bluetooth communication module, ECG sensor, battery, and mobile phone. The ECG data is obtained by a miniaturized sensor and the data is transferred to a mobile phone using Bluetooth communication. Then, user can monitor his/her own ECG signal on an application using Android in mobile phone. The Bluetooth communication device is used due to highly reliable data transmission property and the Bluetooth chip is embedded in every mobile phone. The wearable shirts with chest belt of Bluetooth ECG module is designed with a focus on convenience in the daily life of a wearer. The ECG signal evaluation software in Android based mobile phone is developed for the health check and the ECG signal variation is tested according to the activities of the wearer such as walking, climbing stairs, stand up and sit down, and so on.

무선 캡슐내시경 조종을 위한 머리부착형 디스플레이 인터페이스 시스템의 개발 (Development of Head Mounted Display Interface System for Controlling Wireless Capsule Endoscope)

  • 황영은;손영돈
    • 대한의용생체공학회:의공학회지
    • /
    • 제43권6호
    • /
    • pp.417-423
    • /
    • 2022
  • The present study proposed a new interface system for capsule endoscopy by using head mounted display (HMD) device, which can control the orientation of the capsule endoscope with electromagnetic actuator (EMA) system. The orientation information of the HMD user was detected by the gyroscope sensor built into the device and then calculated to as an angle increment using Unity Engine compiler. The measured angle changes from the HMD were converted to the current values of the corresponding coils to be changed in the EMA system. Two experiments were designed to measure the accuracy and the intuitiveness of the HMD interface system. In the angle accuracy measurement, the capsule endoscope driven by HMD interface system showed the averaged errors of 0.68 degrees horizontally and 1.001 degrees vertically for given test angles. In the intuitiveness measurement, HMD interface system showed 1.33 times faster manipulation speed rather than the joystick interface system. In this respect, the HMD interface system for capsule endoscopy was expected to improve the overall diagnostic environment while maintaining comfort of patients and clinicians.

이동식 복지용구 소독을 위한 스마트 기반의 통합제어시스템 구현 (Implementation of Integration Control System Based on Smart for Moving Welfare Medical Device Disinfection)

  • 황기현
    • 한국정보통신학회논문지
    • /
    • 제18권9호
    • /
    • pp.2251-2258
    • /
    • 2014
  • 본 논문에서는 이동식 복지용구 소독을 위한 통합제어시스템을 개발하였다. 통합제어시스템은 과산화수소 증기 공급 제어회로와 저 진공을 이용한 살균 소독챔버 제어회로 및 마이크로버블을 이용한 세탁 제어회로 구성된다. 개발한 통합제어시스템에 대한 동작상태 및 통신 상태 등을 측정하기 위하여 스마트 기반의 원격 제어 및 모니터링 시스템을 구현하였다. 개발한 통합제어시스템 에 대한 성능을 평가하기 위해 실험 장치를 구현하였다. 제어회로에 대한 동작상태 및 신호 송수신 등을 측정해본 결과, 정상적으로 동작함을 알 수 있었다. 그리고 스마트 기반의 원격 제어 및 모니터링 시스템과의 연동 테스트에서 개발한 통합제어시스템이 통신상태, 센서 인터페이스 및 제어 면에서 좋은 동작성능을 보였다. 향 후 개발한 제어시스템을 실 시스템에 적용하여 그 성능을 증명하는 것이 필요하다.

NFC기반의 보안인증을 통한 이륜차 도난방지장치 구현 (Development of Motocycle's Anti-theft Device Based on NFC)

  • 진태석
    • 전기학회논문지
    • /
    • 제65권1호
    • /
    • pp.165-170
    • /
    • 2016
  • Recently, IoT(Internet of Things) technology is widely applied in not only our everyday lives but also in industry, medical field and security system. NFC system, the basis of IoT, is in the spotlight which can be an alternative solution of a anti-theft system for motorcycle as they basically have practicality and security issues. Anti-theft system for motorcycle using the NFC smart devices based on RFID has been proposed. because Progress of Smart Device If someone get the Key for motorcycle theft, he can be easily stolen motorcycle. We thought about the concept of NFC security devices as a wireless key and automatic solenoid valve for setting the lock and unlock module. In this study, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.

상태정보에 따른 체내삽입형 장치를 부착한 유-헬스케어 환자의 프라이버시 보호 프로토콜 (U-Healthcare user's privacy protection protocol with Implantable medical Device of State Information)

  • 정윤수;이상호
    • 한국통신학회논문지
    • /
    • 제37권4C호
    • /
    • pp.297-306
    • /
    • 2012
  • 최근 유헬스케어 시스템은 IT 기술과 의료서비스가 접목되면서 사용 범위가 점점 넓어지고 있다. 그러나 유헬스케어 시스템 중 체내삽입형 장치를 사용하는 환자의 경우, 환자의 프라이버시 예방과 안전한 접근 제어에 대한 대비책이 마련되어 있지 않아 그에 따른 프라이버시 보호 문제가 대두되고 있다. 본 논문에서는 체내삽입형 장치를 사용한 환자의 프라이버시를 보장하기 위해서 환자 정보를 가상화한 후 환자의 상태값과 수행값을 동기화함으로써 제3자의 불법적 접근을 예방할 수 있는 환자 프라이버시 보호 프로토콜을 제안한다. 제안된 프라이버시 보호 프로토콜은 사전에 관리 서버에 등록된 병원(의사, 간호사, 약국 등)의 권한정보에 따라 체내삽입형 장치를 부착한 환자의 개인정보의 열람범위를 제한하여 병원관계자의 불법적 업무 수행을 예방한다. 특히, 체내삽입형 장치와 게이트웨이 역할을 하는 가상장치는 접근 허가가 승인된 환자 정보 이외에 허가받지 않은 정보에 대해서 제 3자가 쉽게 접근하지 못하도록 환자의 상태값과 수행값을 동기화함으로써 환자의 프라이버시 관리의 효율성을 향상시키고 있다.