Garlic is one of the major seasoned vegetables in Korea along with peppers and onions. Although it is a major cash crop, the aging population of farmers and rising labor and production costs are cited as the reasons for the decreasing production. Accordingly, it is necessary to introduce and spread garlic cultivation mechanization technology to reduce the input labor demand. In this study, conducted a field demonstration in Jeollanam-do using garlic harvesting machinery. In addition, it was intended to improve the mechanization rate of garlic harvesting by deriving factors that can apply to garlic harvesting machines in Jeollanam-do and investigating regional adaptability. As a result of the analysis, it was found that the harvesting performance of the garlic harvester and garlic collector in Jeollanam-do met the agricultural machine test standards. In addition, as a result of calculating the input effect of the mechanized work system compared to the conventional garlic harvesting work system, it was found that there was a labor-saving effect of 96.02%.
토공작업은 모든 종류의 토목공사에 기본이 되는 공종으로 공기, 공사비와 생산성에 영향을 미치는 요소이다. 토공은 그룹으로 형성된 다수의 건설장비들이 필요한 기계화 작업이며 건설장비로 인하여 많은 연료를 소비하는 작업이다. 그러나 일반적으로 토공작업은 건설장비 운전자의 경험과 직관에 의하여 수행되기 때문에 낮은 생산성, 높은 연료사용량 및 탄소를 많이 배출시킬 수 있는 문제점을 갖고 있다. 최근 연구에 의하면 이러한 문제점의 해결책의 하나로 건설장비 플릿관리 시스템이 제안되고 있다. 건설장비 플릿관리 시스템은 효과적인 토공계획, 최적의 건설장비 할당, 효율적인 건설장비 운영, 빠른 정보교환 등과 같은 기능을 수행한다. 본 연구에서는 건설장비 플릿관리 시스템 구축시 필요한 주요 방법론을 제시하는 것을 목적으로 하고 있다. 토공작업을 위한 3D 솔리드 파라메트릭 모델 형성, 옥트리를 이용한 토량배분, 건설장비 플릿구성 및 운영 방법론을 제시하였다. 건설장비 플릿관리 시스템의 효용성을 건설장비 가동률, 연료사용량, 이산화탄소 배출량 측면에서 검증해 보기 위하여 시뮬레이션을 실시하였다.
Recently just as in the automobile industry, shipbuilders also try to reduce material consumption and weight in order to keep operating costs as low as possible and improve the speed of production. Naturally industry is ever searching for welding techniques offering higher power, higher productivity and a better quality. Therefore it is important to have a details research based on the various welding process applied to steel and other materials, and to have the ability both to counsel interested companies and to evaluate the feasibility of implementation of this process. Submerged-arc welding (SAW) process is usually used about 20% of shipbuilding. Similar to gas metal arc welding(GMAW), SAW involves formation of an arc between a continuously-fed bare wire electrode and the work-piece. The process uses a flux to generate protective gases and slag, and to add alloying elements to the weld pool and a shielding gas is not required. Prior to welding, a thin layer of flux powder is placed on the work-piece surface. The arc moves along the joint line and as it does so, excess flux is recycled via a hopper. Remaining fused slag layers can be easily removed after welding. As the arc is completely covered by the flux layer, heat loss is extremely low. This produces a thermal efficiency as high as 60% (compared with 25% for manual metal arc). SAW process offers many advantages compared to conventional CO2 welding process. The main advantages of SAW are higher welding speed, facility of workers, less deformation and better than bead shape & strength of welded joint because there is no visible arc light, welding is spatter-free, fully-mechanized or automatic process, high travel speed, and depth of penetration and chemical composition of the deposited weld metal. However it is difficult to application of thin plate according to high heat input. So this paper has been focused on application of the field according to SAW process for thin plate in ship-structures. For this purpose, It has been decided to optimized welding condition by experiments, relationship between welding parameters and bead shapes, mechanical test such as tensile and bending. Also finite element(FE) based numerical comparison of thermal history and welding residual stress in A-grade 3.2 thickness steel of SAW been made in this study. From the result of this study, It makes substantial saving of time and manufacturing cost and raises the quality of product.
TBM 시공 중에는 설계단계에서 예측하지 못한 지반과 조우할 수 있다. 그 중에서 TBM 굴진의 안정성을 저해하는 위험지반과 조우할 경우, 예상치 못한 문제로 인한 공사비 증가, 공기 지연 등으로 상당한 경제적 손실이 발생하게 된다. 따라서 시공 중 예상치 못한 리스크를 최소화하는 것은 TBM 프로젝트에서 매우 중요한 문제이다. 본 논문에서는 TBM 시공 중 막장전방의 위험지반을 사전에 예측하는 방안과 해당 위험지반으로 인해 발생 가능한 리스크 사건을 제시하였다. 또한 리스크 사건의 위험도를 평가하고, 대응이 필요한 리스크 사건에 대하여 대책공법을 제시할 수 있는 TBM 리스크 관리 시스템을 개발하였다. 먼저 TBM 굴진 중 안정성을 저해하는 위험지반들로 인해 발생 가능한 리스크 사건을 정리하였으며, 시공 중 막장전방의 위험지반을 예측하기 위한 방법으로 전기비저항 탐사기법을 활용하였다. 이렇게 예측한 위험지반에서 발생 가능한 리스크 사건의 위험도 평가는 위험지반 조우 시 리스크 사건의 발생확률과 리스크로 인한 다운타임의 크기에 대한 상호 영향도를 고려하여 수행한다. 평가 결과 등급에 따라 대응이 필요한 리스크 사건에 대하여 대책공법들을 제시하였으며, 여러 대책공법 중 최적의 대책공법을 객관적인 기준으로 선정하기 위하여 공사비와 공사기간 등을 속성으로 한 다기준 의사결정론을 활용하였다. 마지막으로 본 시스템의 검증을 위해 실제 리스크가 발생했던 EPB Shield TBM 현장에 개발 시스템을 적용하여, 시공 중 효과적인 리스크 관리를 통해 발생 가능한 리스크의 사전 대응이 가능함을 확인하였다.
최근 국내 터널공사에서 낙반사고의 위험성이 낮고 진동과 소음이 적은 쉴드 TBM을 이용한 기계화 터널공법이 많이 적용되는 추세이며, 이러한 쉴드 TBM으로 터널 굴착 시 적절한 굴착속도를 설계하는 것이 무엇보다 중요하다. 본 연구에서는 ${\bigcirc}{\bigcirc}{\sim}{\bigcirc}{\bigcirc}$ 고속철도 쉴드 TBM 공사구간에 대하여 지반조사 결과와 TBM 굴진데이터를 분석하고 이를 기존 연구자들에 의해 제안된 경험적 굴착속도 예측방법에 적용하였다. 또한, 현장 굴진데이터 중 커터 당 추력과 지반 일축압축강도와의 상관관계를 분석하고 이를 통해 TBM 터널 설계 시 커터 당 추력과 일축압축강도를 변수로 굴착속도를 예측할 수 있는 간편 모델을 도출하였다. 기존 해외의 여러 굴착속도 예측 모델들을 해당 TBM 현장에 적용한 결과 예측치와 측정된 굴착속도는 약 50~500%의 비교적 큰 오차를 보인 반면, 본 연구에서 도출된 굴착속도 예측모델은 평균 약 15%의 오차율을 나타내어 추후 유사한 지반조건을 가진 쉴드 TBM 현장에 대해서 적용성이 높을 수 있을 것으로 기대한다.
The purpose of this study is to identify the expression methods of uncanny images shown in contemporary fashion through the visual expression methods of plastic arts. The study results are as following. First, there is a concept-forming element of 'The return of Repressed', which is a psychological mechanism for generating uncanny sets to the component of 'repression' and 'return'. 'Repression' herein consisted of 'unconsciousness', 'the other', and 'anxiety', while the return was composed of 'trauma' and 'repetition compulsion'. Second, there are visual expression methods of the uncanny in contemporary art. The subject of 'repressed things' was expressed as grotesque and having a terrible look. 'Fragmented body' was analyzed as 'dismantling' by mutilation, 'combination' placing cut body parts in other places, and 'damage' suffering from an illness or accident. 'Fear of death' was shown as 'anatomy' reminiscent of death and 'iconography of death' meaning return of the dead. 'Post-human' was a surrealistic being such as a monster and mechanized human, and was analyzed as 'gene variation' and 'cyborg'. Third, the methods of visual expression of the uncanny reflected on contemporary fashion was analyzed as 'fragmented body', 'fear of death', and 'post-human'. 'Fragmented body' appeared as the object reminiscent of the fragmented body, 'dismantling and combination of the body', and 'damage of the body' through the distortion of the clothing construction principle. 'Fear of death' visualized the characteristic elements of the subject reminiscent of death as 'iconography of death' and 'symbolic object of death' through the motif. 'Post-human' was the description of the subject beyond the body's function and form, and was shown as 'gene variation' and 'cyborg'.
In order primarily to establish the working stages in the reclamation works and to- analyze the working characteristics of man-power, the investigations for construction_ works were conducted on Echeon Largescale Reclamation Project Area. The results are summarized as follows; 1. The working chart on reclamation by man-power is Fig.IV-1. 2. The. ratio of actual working time to total varied with the total times, being 1.0 for less than 4 hours but about 0.9-0.83 for more than 5 hours. 3. Felling operations can be classified into three stages as truck-cutting, branch- cutting, and binding-up, of which results are in Table IV-2. The larger the diameter of stands, the more times for both the cutting operations are, but the moving time is constant to be about 15 sec. 4. Stumping and clearing works have the results prepared in Table IV-3. Between the stumping time and the diameter of stands d, there show highly significant positive correlations, expressed as t=2.212d -4.792. The more the ratio of small diameters to total, the more hastily the total hourly working results of each person are increased. 5. Working results for constructing drainage facilities and ridges are in Table IV-5. The labours for placing patches of grass are required more than twice or three times as much as those are showed in the established standards, and such the different results imply more investigation to be necessary. 6. Table IV-6 sholvs the results for plowing andh arrowing, that are less amount thant the standards. Therefore, more inverestigation should be prepared.
Despite most of tasks in manufacturing, construction and agriculture, etc., were currently mechanized and automated, manual materials handling still existed in atypical working condition. In case of manual materials handling, repetitive work, inappropriate working posture, excessive force, contact stress might cause overload, which could lead to work-related musculoskeletal disorders and low back pains. On this basis, the goal of this study is to reveal the effects of various lifting postures of trunk angles and lower extremity postures on maximum holding time(MHT). Twenty two subjects were recruited from a university population. The experiment was designed by a combination of three trunk angle ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) and three lower extremity postures(straight, bent, kneeling). Before experimental trials, subjects performed MVC(maximum voluntary contraction) exertions in three trunk angles ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) to calculate 30%MVC at designated postures. In each trial, they were required to hold the handheld load(30%MVC) for a designated posture as long as they could. The results of MVC by trunk angles were measured in $0^{\circ}$ > $20^{\circ}$ > $60^{\circ}$ orders, but those of MHT measured in $20^{\circ}$ > $0^{\circ}$ > $60^{\circ}$ orders. These results showed that straight posture is the ideal working posture in work exerted a strong force for a short time, but the ability to work might be improved in the trunk angle $20^{\circ}$ in work required 30%MVC for a long time. Also, results of MVC and MHT by lower extremity postures measured in straight > bent > kneeling orders.
최근 도심지에서의 터널 및 지하공간 개발에 있어 TBM을 비롯한 다양한 형태의 기계식 굴착장비의 적용이 증가하고 있다. 한편 기존의 전통적인 암석절삭방식에서 변형된 언더커팅방식 적용한 암반의 기계식 굴착공법에 대한 연구가 선진국을 중심으로 수행되어 소개된 바 있다. 따라서 국내에서도 기존의 암반기계굴착에 대한 연구를 지속적으로 수행함과 동시에 최신 기술에 대한 연구가 요구된다. 본 연구에서는 언더커팅에 대한 기초연구로서 해당 기술의 원리 및 굴착방식에 대한 소개와 더불어 해외 선진 기관들의 연구 현황을 조사하였다. 언더커팅공법은 터널 및 지하공간의 개발을 위한 단독공법으로 적용이 가능할 뿐만 아니라 터널의 확공 및 기존 공간의 확장을 위한 보조공법으로의 활용성도 우수한 것으로 판단되었다.
Tunnel excavation leads to a disturbance on the initial stress balance of surrounding soils, which causes convergences around the tunnel and settlements at the ground surface. Considering the effective impact of settlements on the structures at the surface, it is necessary to estimate them, especially in urban areas. In the present study, ground settlements due to the excavation of East-West Line 7 of the Tehran Metro (EWL7) and the Abuzar tunnels are evaluated and the effect of the lateral earth pressure coefficient ($K_0$) on their extension is investigated. The excavation of the tunnels was performed by TBMs (Tunnel Boring Machines). The coefficient of lateral earth pressure ($K_0$) is one of the most important geotechnical parameters for tunnel design and is greatly influenced by the geological characteristics of the surrounding soil mass along the tunnel route. The real (in-situ) settlements of the ground surface were measured experimentally using leveling methods along the studied tunnels and the results were compared with evaluated settlements obtained from both semi-empirical and numerical methods (using the finite difference software FLAC3D). The comparisons permitted to show that the adopted numerical models can effectively be used to predict settlements induced by a tunnel excavation. Then a numerical parametric study was conducted to show the influence of the $K_0$ values on the ground settlements. Numerical investigations also showed that the shapes of settlement trough of the studied tunnels, in a transverse section, are not similar because of their different diameters and depths of the tunnels.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.