• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.1998-2006
• /
• 2005

The lane departure avoidance systems have been considered promising to assist human drivers in AVCS (Advanced Vehicle Control System). In this paper, a lane departure monitoring and control system is developed and evaluated in the hardware-in-the-loop simulations. This system consists of lane sensing, lane departure monitoring and active steering control subsystems. The road image is obtained based on a vision sensor and the lane parameters are estimated using image processing and Kalman Filter technique. The active steering controller for avoiding the lane departure is designed based on the lane departure metric. The proposed lane departure avoidance system is realized in a steering HILS (hardware-in-the-loop simulation) tool and its performance is evaluated with a driver in the loop.

• Journal of Mechanical Science and Technology
• /
• v.15 no.1
• /
• pp.66-80
• /
• 2001

In brake systems, a proportioning valve(P. V), which reduces the brake line pressure on each wheel cylinder for the anti-locking of rear wheels, is closely related to the safety of vehicles. However, it is impossible for current P. V. s to completely control brake line pressure because, mechanically, it is an open loop control system. In this paper we describe an electronic brake force distribution system using a direct adaptive fuzzy controller in order to completely control brake line pressure using a closed loop control system. The objective of the electronic brake force distribution system is to change the cut-in-pressure and the valve slop of the P. V in order to obtain better performance of the brake system than with mechanical systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.121-122
• /
• 2006

In the case of mechanical control systems, it is highly useful to be able to provide a compact model of the mechanical system to control engineers using the smallest number of variables, while still providing an accurate model. The reduced mechanical model can then be inserted into the complete mechanical control system models and used for system-level dynamic simulation. In this paper, a moment-matching based model order reduction (MOR) which reduces the number of degrees of freedom of an original finite element model via the Arnoldi process is considered to study the dynamic responses of a HDD actuator and suspension system.

• Journal of Mechanical Science and Technology
• /
• v.19 no.6
• /
• pp.1268-1279
• /
• 2005

The current method for pavement sign marking operations is labor-intensive and very dangerous due to the exposure of workers to passing traffic. It also requires blocking traffic for a long period of time resulting serious traffic jam. This paper deals with the development of a robotic system for automating the pavement sign painting operations. The robotic system consists of gantry frame equipped with transverse drive rail and automatic paint spray system. The workspace of the gantry robot is extended to one-lane width with the transverse rail system. This research also includes the development of font data structures that contain the shape information of pavement signs, such as Korean letters, English letters and symbols. The robot path is generated with this font data through the procedures of scaling up/down and partitioning the signs to be painted depending on the workspace size.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1006-1007
• /
• 2023

휠체어의 사용자는 꾸준히 증가하며 휠체어 시장 또한 빠른 속도로 성장중이다. 하지만 휠체어 사용에 많은 문제점이 있고 자율주행 모빌리티 휠체어를 통해 이를 해결하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.880-881
• /
• 2023

본 연구는 차량 동역학이 적용된 자율주행 시뮬레이터에서 구현된 차량의 거동이 실제 차량과 유사한지 검증하는 것이다. 이를 위해 실제 차량모델에 외력을 가할 수 있는 기구를 개발하여 데이터를 획득하고 분석하고자 한다. 시뮬레이터에서 구현된 차량과 유사한 서스펜션 구조를 가진 차량 모델을 만들고 센서를 달아 차량의 운동 모델을 모사했으며, 캠과 감속기어를 활용해 외력을 모사하기 위한 기구를 제작하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1968-1970
• /
• 2003

In this paper we propose a system to forecast the dangerous behavior of the dementia patients. Basic idea of our approach is to measure the body movements of the dementia patients using the acceleration sensor. Based on the data measured, warning the care-givers about possible dangerous actions like falling down from the bed and slipping down onto the floor to some extent. The signals measured by the acceleration sensor are processed by a one-chip computer. Based on the diagnosis of the one-chip computer , alert signal is generated to the care-giver by a wire-less signal. The sensor is implemented in a compact body . Applicability of the system is now being examined at a nursing home.

• Journal of Mechanical Science and Technology
• /
• v.15 no.5
• /
• pp.544-554
• /
• 2001

A shop floor can be considered as an important level to develop Computer Integrated Manufacturing system (CIMs). However, a shop floor is a dynamic environment where unexpected events continuously occur, and impose changes to the planned activities. To deal with this problem, a shop floor should adopt an appropriate control system that is responsible for the coordination and control of the manufacturing physical flow and information flow. In this paper, a hybrid control system is described with a shop floor activity methodology called Multi-Layered Task Initiation Diagram (MTD). The architecture of the control model contains three levels: i.e., he shop floor controller (SFC), the intelligent agent controller (IAC) and the equipment controller (EC). The methodology behind the development of the control system is an intelligent multi-agent paradigm that enables the shop floor control system to be an independent, an autonomous, and distributed system, and to achieve an adaptability to change of the manufacturing environment.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.749-754
• /
• 2004

Up to now, non-explosive demining system adaptable to a mobile robot has been developed. This system has much smaller platform and consists of non-explosive mechanism. Brief experiment indoors showed thai developed demining system can remove landmines well. But, out of doors, some problems are detected i.e. Inclination of overall system causes a suspension of rake rotation. In this research, a study on performance improvement of developed non-explosive demining system is mainly discussed. To compensate the inclination of the system, mechanical sensor composed of shaft and spring is used. This sensor gives a signal to a leadscrew motor and controls a rotating direction. From an experiment, it is confirmed that the mechanical sensor as stated is a good solution of the inclination of the system.

• Journal of Navigation and Port Research
• /
• v.35 no.4
• /
• pp.303-316
• /
• 2011

With the development of mechatronics technology in the transporter industry, the electric power assisted steering (EPAS) system has many advantages compared to the hydraulic system. Many manufacturers are developing and applying EPAS systems to improve the performance of the transporter. Using the HILS system developed in the paper, an adaptable EPAS system was developed for real transporter. It was installed in a real, KIA Rio, and tested. Results indicated outstanding performance. Therefore, the developed EPAS can be applied via HILS system.