• Journal of Welding and Joining
• /
• 제33권3호
• /
• pp.12-18
• /
• 2015

The ultimate goal of developing body is revealed the "lightweight" at latest EuroCarBody conference 2012 and the most core technology is joining process to make lightweight car body design. Accordingly, in this study, the car body assembly line for the assembly process applies to any introduction, particularly in the assembly of aluminum alloy and composite materials applied by the process for the introductory approached. Process were largely classified by welding (laser, arc, resistance, and friction stir welding), bonding (epoxy bonding) and mechanical fastening (FDS, SPR, Bolting and clinching). Applications for each process issues in the case and the applicable award was presented, based on the absolute strength of the test specimens and joining characteristics for comparative analysis were summarized. Finally, through this paper, we would tried to establish the characteristics of the joint for lightweight structure.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.93-100
• /
• 2013

This paper presents the development process for a bicycle monocoque frame using bolt fastening. Traditionally, bicycle frames have been constructed with metal tubes joined at their ends by welding. These frames have been brazed or soldered onto metal lugs, forming the frame. Because stress loads become greatest at the joint of the bicycle tube frame, joint construction strongly influences frame design and construction. To avoid the inherent problems of material discontinuity at frame joints, numerous designers have attempted to reduce or eliminate the number of joints in tube frames. Nevertheless, the manufacture of high quality, reliable, one-piece and jointless frames has proven difficult and expensive. In this study, a new monocoque frame adapted to a hybrid bike is proposed. The advantage of the monocoque frame, is theat is has a rechargeable battery system that is built into the frame; as a result, the emotional quality for the customer is improved. In order to estimate the design compatibility compared with that of tube frames, structural analysis is performed using finite element method. A prototype based on a modified design has also been made and stability testing has been carried out.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8812-8819
• /
• 2015

콘크리트 궤도 건설의 증가로 인한 레일 체결장치의 중요성이 커지고 있는 상황에서 최근 레일 체결장치의 부속품인 텐션클램프가 절손되는 사고가 발생되었다. 이는 현장상태, 운영기관, 열차운행조건 및 빈도 등 다양한 요인에 의한 것으로 텐션클램프의 거동관련 연구가 필요하다. 본 논문에서는 실내실험 및 유한요소해석을 통해 텐션클램프의 역학적 거동을 분석하였다. 실내실험을 수행하여 텐션클램프 체결력에 따른 응력 및 변위를 도출하고 이를 유한요소해석 결과와의 비교를 통해 해석 모델을 검증하였다. 또한 검증된 모델을 적용하여 열차 하중에 따른 텐션클램프의 변형과 응력을 도출하고, 응력 분석을 통해 텐션클램프의 피로에 대한 취약도를 파악하였다.

• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.38-43
• /
• 2014

굽힘파 전파 특성을 이용하여 지지강성을 도출하고 이를 이용한 레일체결장치의 결함 검출 시험법을 제안하였다. 점탄성 패드로 지지되고 체결장치로 고정된 레일의 진동 응답은 주파수에 따라 지지단 동특성에 크게 영향을 받는다. 체결장치에 결함이 발생할 경우에는 구조적인 불연속성으로 인해 굽힘 파동의 전파 특성이 변화하게 된다. 이러한 변화를 감지하기 위해서 전달함수법을 이용해 주파수에 따라 변화하는 레일 지지단 동특성을 측정하였다. 연속 스프링으로 지지된 레일 응답으로부터 예측한 레일의 보존에너지를 이용해 결함에 대한 파동 전파의 민감도를 해석하였다. 민감도 해석 결과와 동적지지강성 변화를 측정하여 손상지수를 계산하고 결함 위치를 추정하였다.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.132-141
• /
• 2013

Robotic Drilling Systems(RDSs) set the standard for the factory automation systems in aerospace manufacturing. With the benefits of cost effective drilling and predictive maintenance, RDSs can provide greater flexibility in the manufacturing process. The system can be easily adopted to manage very complex and time-consuming processes, such as automated fastening hole drilling processes of large aircraft sections, where it would be difficult accomplished by workers following teaching or conventional guided methods. However, in order to build an RDS based on a CAD model, the precise calibration of the Tool Center Point(TCP) must be performed in order to define the relationships between the fastening-hole target and the End Effector(EEF). Based on the kinematics principle, the robot manipulator requires a new method to correct the 3D errors between the CAD model of the reference coordinate system and the actual measurements. The system can be called as a successful system if following conditions can be met; a. seamless integration of the industrial robot controller and the IO Level communication, b. performing pre-defined drilling procedures automatically. This study focuses on implementing a new technology called iGPS into the fastening-hole-drilling process, which is a critical process in aircraft manufacturing. The proposed system exhibits better than 100-micron 3D accuracy under the predefined working space. Based on the proposed EEF fastening-hole machining process, the corresponding processes and programs are developed, and its feasibility is studied.

• 대한기계학회논문집A
• /
• 제41권3호
• /
• pp.241-249
• /
• 2017

파워록은 동력을 전달하는 축에 설치되는 부품으로, 연결되는 두 축의 비정열을 보상하고 과부하 또는 비정상적인 부하가 걸릴 경우 동력을 단절하여 주요 부품을 보호하는 역할을 한다. 본 연구에서는 파워록의 내륜에 형성된 테이퍼 등의 형상과 볼트 체결력, 그리고 마찰이 동력전달 성능에 미치는 영향을 분석하였다. 두 개의 모델에 대해 실험과 유한요소 해석을 수행하여 유한요소해석 결과의 신뢰성을 검증하였고. 유한요소 해석 결과 및 이론 분석을 통해서 각 인자가 동력전달 성능에 미치는 영향을 분석하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.112-119
• /
• 2009

The mechanical fastening has some advantages in respect of the fastening strength and disassemble of the fastened parts. However, at the same time it has some dangerous factors, can cause fatigue crack initiation and propagation due to not only the static loading such as cargo and passengers but also the dynamic loading like vibrations which occur in the engines and the propellers. For this reason, the strength evaluation for the mechanical fastenings along with the sophisticated and detailed mechanical design and the safety evaluation should be executed, In this paper, we were carried out experiments to study fatigue crack growth paths in structures containing the multiple circular holes. It was investigated that how circular holes are affected on fatigue crack growth paths using the specimen consists of A5052-H112, which is widely used as the ship materials. It was found from the experimental results that the fatigue crack as if it is drawn to circular holes when crack tip approach to circular holes. However, it did not go into circular hole if there is the next circular hole. Therefore, the clarification of mechanism on the fatigue crack initiation and the propagation in structures containing the multiple circular holes can be expected in this study.

• 대한기계학회논문집A
• /
• 제41권4호
• /
• pp.257-262
• /
• 2017

최근 스마트 폰, 스마트 와치 등과 같은 전자기기의 크기가 작아지면서, 그에 사용되는 체결 볼트의 크기 또한 작아지고 있다. 초소형 나사는 제품을 체결하는 데 있어 충분한 체결 토크나 풀림 방지효과를 갖지 못한다. 그래서 초소형 나사의 체결력과 풀림방지 효과를 유지 및 강화하는 연구가 필요하다. 본 연구에서는 초소형 나사의 풀림방지 효과를 강화하기 위해 나사의 머리 밑 면에 쎄레이션 형상을 추가하여 그 효과를 분석하였다. 쎄레이션 볼트는 풀림과정에서 피체결체 윗면을 변형시켜 풀림 방지 턱을 생성해 풀림을 방지하는 역할을 한다. 쎄레이션 개수와 체결 깊이를 변수로 하여 그 영향을 분석하고 풀림 방지 성능에 미치는 영향을 확인하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.57-60
• /
• 2005

Composite-to-aluminum joins were tested to get failure loads and modes for three types of joins; adhesive bonding, bolt fastening, and adhesive-bolt hybrid joining. Film type adhesive FM73 and paste type adhesive Cytec EA9394S were used for aluminum and composite bonding to make a double-lap joint. A digital microscope camcorder was used to monitor the failure initiation and propagation. It was found that the hybrid joining is an effective method to strengthen the joint when the mechanical fastening is stronger than the bonding as in the case of using the paste type adhesive. On the contrary, when the strength of the bolted joint is lower than the strength of the bonded joint as in the joint with the film type adhesive, the bolt joining contribute little to the hybrid joint strength.