• 품질경영학회지
• /
• 제48권3호
• /
• pp.381-393
• /
• 2020

Purpose: The purpose of this study was to find useful solutions by analyzing causes and results about defects on mechanical drawing notes and provide an automated tool with solutions to mechanical engineers. Methods: The collected data for defects on mechanical drawing notes were from ongoing development and mass production projects. Various measurement methods were used based on the Lean 6 Sigma analysis such as Process analysis, C&E diagram and some statistical analysis. Results: The results of this study are as follows; The results of the Lean 6 Sigma analysis, the validity of the selected indicators for improving drawing notes quality was verified through the verification of cause variables. The strategy established to improve the mechanical drawing notes was reflected as an automated program, and the defects were within a manageable range and achieved target Sigma level. Conclusion: Through the application of the "Mechanical drawing notes automation tool", it is expected to resolve the "Voice of Customer, VOC" and "Voice of Business, VOB".

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.839-846
• /
• 2001

Some deep drawing characteristics at elevated temperatures were investigated for the SCPI steel sheets by using a Cr-coated die. For this investigation, six different temperatures between room temperature and 250$\^{C}$, and six different drawing ratios ranging from 2.4 to 2.9 were considered. As a result, the limiting drawing ratio, the maximum drawing force and the maximum drawing depth were found to be affected sensitively by temperature, and more stable through-thickness strain distribution was observed at elevated temperatures. Some experimental results compared favorably with theoretical results obtained by using the finite element method.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.873-882
• /
• 1992

본 연구에서는 축대칭 형상의 하이드로 미케니칼 디프드로잉 공정을 강소성 유한요소법으로 해석하는 것이다. 본 논문에서는 Fig.1에서 보이는 바와 같은 경우 에 대하여 평두 펀치(flat headed punch)를 사용한 공정을 강소성 유한요소법으로 해 석하였으며 펀치 행정에 따른 챔버내의 압력 및 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 플랜지부의 압력분포를 구하였다. 접촉부의 처리는 Yang등이 제안 한 방법을 적용하였다. 이론해석의 타당성을 알아보기 위하여 금형을 설계, 제작하 고 실험을 수행하여 결과를 비교 검토하였다.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.124-130
• /
• 2009

In the multi-stage shape drawing process, the most important aspect for the economy is the correct design of the various drawing stage. For most of the products commonly available round or square materials can be used as initial material. However, special products should be pre-rolled. This study proposes a process design method of multi-stage shape drawing process for producing cross roller guide. Firstly, a standard classification of shape drawing process is suggested based on the requirement of pre-rolling process. And a design method is proposed to design the intermediate die shape. The process design method is applied to design the multi-stage shape drawing process for producing cross roller guide. Finally, the effectiveness of the proposed design method is verified by FE-analysis and shape drawing experiment.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.39-45
• /
• 2014

Today, the development of digitized information media and info-communications are bringing many changes. Due to the development of IT thechnology, we can learn wherever, whenever, regardless of time and place. Machine drawing subject is a very important in mechanical engineering course, but it's studyed only basic theory in a short period, average 1~2weeks. So that, students think that the mechanical drawing is of minor importance. Such ideas make them difficult to impove sense of space in isometric drawing and drawing skill. Therefore, in this paper, augmented reality-based contents through the system, Mechanical Drawing of education to meet the effectiveness and satisfaction, student learning can be spontaneously it was construct self-system. And, Theoretical part of the Mechanical Drawing is proposed ensure more efficient and easier training. In this paper, we were test operation for user effectualness of proposed service at Korea Polytechnics Colleges a industrial facilities management in Daegu. Target user are 66 students, and The students were divided into experimental group and comparison group. Experimental results, experimental group was able to do systematically experience many Projection Drawing and Pictorial Drawing in short schooltime. And, The test operation results showed that have the possibility to meet education effectiveness and user satisfaction in this augmented reality-based contents system.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제2권2호
• /
• pp.125-130
• /
• 2014

기계제도 교과목은 기계공학 교육에서 매우 중요한 위치를 차지하고 있음에도 불구하고, 이론교육과 실습을 병행해야 하고 CAD 소프트웨어 기능 교육도 포함하고 있어서, 내실 있게 운영되기 힘든 교과목이다. 서울과학기술대 기계시스템디자인공학과에서는 기계제도 교육에 PBL 수업 방식을 도입하여 적용하고 있다. 학생들은 이론 수업에서 학습한 기계도면 작성의 규칙, 도면 독해와 작성법 등을 팀별 PBL 과제 수행을 통해 실제로 적용해 봄으로써, 도면 판독과 작성능력을 체득하게 되고 CAD 소프트웨어 활용 기능도 충실히 연습하게 된다. 본 논문에서는 그 동안 시도되었던 다양한 PBL 과제와 교육방법을 소개하고 그 효과를 분석해 보았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.513-518
• /
• 1992

We are now doing research for the drawing check of local parts in mechanical drawing made by a CAD system. It needs the recognition of drawing elements with respect to the local parts. Because, we usually abbreviate the dimensioning in the mutually related drawing elements. This paper is concerned with a computer aided supporting system to the dimension check and recognition of local parts in mechanical drawings. This sytem has been applied to some examples and we have confirmed the feasibility of this checking method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.85-90
• /
• 2001

The microstructure and mechanical property of 0.19C-1.17Cr steel were investigated with cold drawing. This commercial steel has the microstructure that is consist of ferrite and pearlite. The tensile and yield strength are increased as the reduction ratio of cold drawing is increased. It was clear that mechanical properties could be improved by combination of the heat treatments and reduction ratio. Yield strength. tensile strength, and impact value were formulated as a constitutive function of cold drawing ratio, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.1022-1027
• /
• 1989

CAD drawings contain drawing errors similar to manually produced drawings. This paper is concerned with a computer-aided drawing check system for the drawing errors. The problem treated in this paper is the checking of dimension errors, deficiency and redundancy of dimension lines in the mechanical drawings made by a CAD system. Graph theory is used for the checking of the deficient and redundant dimensions. The feasibility of this system is confirmed for the checking items.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.31-35
• /
• 2019

For manufacturing upper housing product of mechanical control valve, the progressive drawing process was conducted experimental. Then, the center of the product was cut to measure the thickness of the product. As a result, the following conclusions were obtained. By means of a stand-alone pad provided with sufficient pressure, it is possible to prevent the occurrence of wrinkles in the die pad product of the drawing process. As a result of the experiment, it was considered that the flange bottom of the product and the lower edge of the product are made thick in thickness, the top edge and the top surface are thin. It is considered that this is due to the size and roughness of the entrance edge radius of the die in the drawing process, and the inflow of the material by the die pad.