Browse > Article

Process Design of Multi-Stage Shape Drawing Process for Cross Roller Guide  

Lee, Sang-Kon (PNU-IFAM JRC, Pusan National Univ.)
Lee, Jae-Eun (Department of Precision Mechanical Engineering, Pusan National Univ.)
Lee, Tae-Kyu (Department of Precision Mechanical Engineering, Pusan National Univ.)
Lee, Seon-Bong (Faculty of Mechanical and Automotive Engineering, Keimyung Univ.)
Kim, Byung-Min (School of Mechanical Engineering, Pusan National Univ.)
Publication Information
Journal of the Korean Society for Precision Engineering / v.26, no.11, 2009 , pp. 124-130 More about this Journal
Abstract
In the multi-stage shape drawing process, the most important aspect for the economy is the correct design of the various drawing stage. For most of the products commonly available round or square materials can be used as initial material. However, special products should be pre-rolled. This study proposes a process design method of multi-stage shape drawing process for producing cross roller guide. Firstly, a standard classification of shape drawing process is suggested based on the requirement of pre-rolling process. And a design method is proposed to design the intermediate die shape. The process design method is applied to design the multi-stage shape drawing process for producing cross roller guide. Finally, the effectiveness of the proposed design method is verified by FE-analysis and shape drawing experiment.
Keywords
Shape Drawing Process; Process Design; Standard Classification; Intermediate Die Shape; FE-analysis; Shape Drawing Experiment;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Bo$\ddot{e}$r, C. R. and Riegger, H., "Pattern Recognition in Steel Profile Production," Int. J. Mach. Tool. Des. Res., Vol. 26, No. 1, pp. 21-34, 1986   DOI
2 Lange, K., "Handbook of Metal Forming," McGraw-Hill Book Company, pp. 14.22-14.23, 1985
3 Joun, M. S. and Hwang, S. M., "Pass Schedule Optimal Design in Multi-Pass Extrusion and Drawing by Finite Element Method," Int., J. Mach. Tools Manufact., Vol. 33, No. 5, pp. 713-724, 1993   DOI   ScienceOn
4 Yoshida, K. and Tuihiji, S., "Multiple Drawing of Rails for Linear Motion Guide," Advanced Technology of Plasticity, Vol. 1, pp. 367-372, 2002
5 Kim, Y. C., Kim, D. J. and Kim, B. M., "Intermediate Die Design System for the Multi-Stage Drawing Process," Trans. NAMRI/SME, Vol. 28, pp. 69-74, 2000
6 Br$\ddot{u}$cker, M., Keller, D. and Reissner, J., "Computer-Aided Drawing of Profile from Round and Square Bar," Annals of the CIRP, Vol. 37, No. 1, pp. 247-250, 1988   DOI   ScienceOn
7 Basily, B. B. and Sansome, D. H., "Some Theoretical Considerations for the Direct Drawing of Section Rod from Round bar," Int. J. Mech. Sci., Vol. 18, pp. 201-209, 1976   DOI   ScienceOn
8 Lee, S. K., Kim, B. M., Kim, S. W., Lee, Y. S. and Lee, J. H., "Optimal Die Profile Design in Tube Drawing Process for Prevention of Material Fracture," J. KSPE, Vol. 23, No. 11, pp. 78-84, 2006   과학기술학회마을
9 Steff, W. and Kopp, R., "Estimation of designing methods for the drawing of section rods and wire," Wire J. Int., pp. 104-109, 1995