• International Journal of Quality Innovation
• /
• 제1권1호
• /
• pp.97-105
• /
• 2000

In this paper, a two-section method for measuring is introduced and the variation sources of measurement process are analysed. Measuring is a special process in general process. Various variation source must be firstly decomposed so that the statistical distribution law of measuring process can be established, and then implement monitoring control of the measuring process. A special method to obtain the measuring variation is discussed, and a monitoring control technique for measuring process is studied based statistical distribution. Towards the end, we briefly introduce software design for the analysis and control of a measurement process.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.47-54
• /
• 2018

These days, the aerospace industry uses larger machining parts and assembly parts than those in the past. The assembly machines also show the same trend. This study is concerned with the alignment measuring apparatus for the B-axis of a separated multi-axis machine. The alignment measuring apparatus is widely installed for assembly machines in the aircraft assembly process. The alignment measuring apparatus consists of a swivel part and a measuring part. This is a new conceptual idea under patent. All elements of the alignment measuring apparatus are analyzed with the FEM. The analyzed result shows that the alignment measuring apparatus is high in accuracy with stability and steady deformation.

• 한국정밀공학회지
• /
• 제29권10호
• /
• pp.1144-1148
• /
• 2012

Process conditions for generating nano patterns handle different process according to the pattern characteristics, and different process data according to patterns in questions. To efficiently find optimal process conditions for generating nano patterns, process data by experiment is needed consideration of the pattern characteristics concerning the equipment. In particular, coating methods of a cylindrical mold differ from it of a flat plate because of viscosity of coating materials. Also the coating thickness affects nano process and pattern line width. So coating method of coating thickness for cylindrical mold is very important on nano pattern generating. In this study, a method is proposed for coating Photo Resist through the spray in order to coat cylindrical mold and measuring the thickness of coating using measuring tip considering the size of cylindrical mold because there is no method in the existing SEM. The proposed method is applied to a real printed electronics system to verify its accuracy and efficiency.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.133-140
• /
• 2001

This paper suggests another system for a cutting force measuring tool in a milling process. Generally, tool dynamometer is taken into account for the most appropriate cutting force measuring tool in the analysis of cutting mechanism. However, high price and limited space make it difficult to be in-situ system for controllable milling process. Although an alternative method using AC current of servo-motor has been suggested, it is unsuitable for cutting force control because of small upper frequency limit and noise. The cutting force measuring system is composed of two load cells placed between the moving table bracket and the nut flange part of ballscrew. It has many advantages such as low cost and wide range measurement than tool dynamometer because of the built-in moving table and the low cost load cell. The static and dynamic model of the measuring system using imbeded load cell is introduced. Various Experiments are carried out to validate both models. By comparing the cutting forces from a series of end milling experiments on the tool dynamometer and the system developed in this paper, the accuracy of the cutting force measuring system is verified. Upper frequency limit is measured by the experiment of dynamic characteristics.

• 품질경영학회지
• /
• 제47권4호
• /
• pp.713-723
• /
• 2019

Purpose: The purpose of this study is to develop a statistical program for capability analysis of measuring system and measurement process based upon KS Q ISO 22514-7. Methods: R is a powerful open source functional programming language that provides high level graphics and interfaces to other languages. Therefore, in this study, we will develop the statistical program using R language. Results: The R program developed in this study consists of the following five modules. ① Measuring system capability analysis with Type 1 study data: MSCA_Type1.R ② Measuring system capability analysis with Linearity study(Type 4 study) data: MSCA_Type4.R ③ Measurement process capability analysis with Type 1 study & Gage R&R study data: MPCA_T1GRR.R ④ Measurement process capability analysis with Type 4 study & Gage R&R study data: MPCA_T4GRR.R ⑤ Attribute measurement processes capability analysis : AttributeMP.R Conclusion: KS Q ISO 22514-7 evaluates measuring systems and measurement processes on the basis of the measurement uncertainty that was determined according to the GUM(KS Q ISO/IEC Guide 98-3). KS Q ISO 22514-7 offers precise procedures, however, computations are more intensive. The R program of this study will help to evaluate the measurement process.

• 한국한의학연구원논문집
• /
• 제12권2호통권17호
• /
• pp.85-92
• /
• 2006

Pulse is one of the basic diagnostic information of TKM(Traditional Korean Medicine). To quantify and standardize pulse diagnosis, we had collected an amount of clinical data from May 2005 by using newly developed pulse analyzer. But there were many noises in pulse wave according to measuring method, environment, operator and condition of patient. So some data can’t be included for analyzing diagnosis. To reduce noises from measuring pulse and to collect reliable pulse wave data, we made the process map of measuring method and applied six sigma project. With this we can improved the method of measuring pulse wave in collecting clinical data. The project follows a disciplined process of five macro phases: define, measure, analyze, improve and control (DMAIC). A process map and C-E diagram are used to identify process input and output variables. The major input variables are selected by using C&E matrix, and process map is developed by analyzing input variables. And the optimum process conditions are going to be controled to avoid in increasing loss of collecting pulse wave data.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.3-10
• /
• 2002

In this study on machine measuring system based on solid feature was developed. This system was applied with injection mold using 3 dimensional solid modeler for verification. Developed program include pre-processor, main processor, and post processor. In pre-processor there are functions which check intersection, simulate motion of probe and calculate measuring time. Main processor generates measuring path and output NC code in Unigraphics. In post-processor functions that include evaluation of undercut or overcut and display of measuring procedure are offered. In addition analysis module for quality control of measured data on manufactured product was developed with geometric and dimensional tolerance concept. As the result developed program could get stability of system, precision of product, rapidity and cost down of manufacturing process compared with before measuring process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.595-598
• /
• 2000

This paper presents new cutting force measuring system for milling process. Usually, tool dynamometer is the most appropriate measuring tool in an analysis of cutting mechanism. High price and limited space, however, make it difficult to be in-situ system for controllable milling process. Although an alternative using AC current of servomotor has been suggested, it is unsuitable for cutting force control because of low bandwidth and noise. We suggest new cutting force measuring system, using two load cell placed between moving table and nut of ballscrew, and modelled on the system statically and dynamically. And to verify the accuracy of the proposed system, a series of carefully conducted experiments were carried out. Experiment results show that models are in reasonably good agreement with the experiment data.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.64-71
• /
• 1995

The objective of this paper is to realize an analysis system that is capable of controlling the quality of an entire cutting process by including a 3 coordinate measuring machine in the process line. Fuzzy reasoning networks based on fuzzy associative memories has been intro- duced in the measuring process, the control limits for the control process have been obtained, and the efficiency and reliability of the system have been determined by examining the simu- lated reasoning control values.

• 산업경영시스템학회지
• /
• 제34권4호
• /
• pp.114-119
• /
• 2011

Process capability indices (PCls) have been widely used in manufacturing industries to provide a quantitative measure of process potential and performance. The previous studies have measured only one location on each part in the case of single variate. To calculate the reliable process capability, a couple of measuring locations on each part are required. In this paper, we propose a new system process capability index $SC_{pm}$ (m) which is the minimum value of the location PCls.