• Ocean and Polar Research
• /
• v.36 no.1
• /
• pp.77-85
• /
• 2014

The quality control of ocean observations data is becoming a major issue as real-time observational data and information services have increased recently. Therefore, it is necessary for oceanographic instruments to calibrate. In this paper, we first introduce the CTD calibration system and traceability. Next, CTD calibration procedures and estimation of uncertainty of measurement are described. The expanded uncertainty (k = 2) of the temperature, pressure and conductivity are 0.$0.003^{\circ}C$, $6.0{\times}10^{-5}$ and 0.006 mS/cm respectively. Finally, the excellence of CTD calibration and its measurement capability has been proven by comparing the inter-calibration result of KIOST and Sea-Bird Electronics (SBE). CTD calibration residuals are less than ${\pm}0.0001^{\circ}C$, ${\pm}0.001$ MPa, ${\pm}0.0001$ S/m for SBE 3plus temperature sensor, SBE 19plus pressure sensor and SBE 4C conductivity sensor respectively.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.415-420
• /
• 2015

A novel method to measure the scale factor for the all-optical atomic spin inertial measurement device (ASIMD) is demonstrated in this paper. The method can realize the calibration of the scale factor by a self-consistent method with small errors in the quiescent state. At first, the matured IMU (inertial measurement unit) device was fixed on an optical platform together with the ASIMD, and it has been used to calibrate the scale factor for the ASIMD. The results show that there were some errors causing the inaccuracy of the experiment. By the comparative analysis of theory and experiment, the ASIMD was unable to keep pace with the IMU. Considering the characteristics of the ASIMD, the mismatch between the driven frequency of the optical platform and the bandwidth of the ASIMD was the major reason. An all-optical atomic spin magnetometer was set up at first. The sensitivity of the magnetometer is ultra-high, and it can be used to detect the magnetization of spin-polarized noble gas. The gyromagnetic ratio of the noble gas is a physical constant, and it has already been measured accurately. So a novel calibration method for scale factor based on the gyromagnetic ratio has been presented. The relevant theoretical analysis and experiments have been implemented. The results showed that the scale factor of the device was $7.272V/^{\circ}/s$ by multi-group experiments with the maximum error value 0.49%.

• The Journal of Information Systems
• /
• v.15 no.3
• /
• pp.1-34
• /
• 2006

The purpose of this study Is to develop empirically validated instrument for business model. The previous researches related to business model were almost taxonomies. And the focus of those researches were the classification by the degree of integration and innovation the origin, and the main source of revenue etc. In the emerging fields such as IT, e-commerce, and e-business, it tends to overlook methodological issue in its substantive relationships and also measurement. Business model is taken an interest in recent years. However, as the non-establishment of construct on business model has made no empirical study, this, study tries to develop an empirical validated instrument that identifies the dimensions of business model by uncovering meaningful group or categories. For this, the outlined domain of business model are defined as an organizational level that competes in the industry through the literature reviews. And the traits such as process integration, value chain reconstruction, strategic alliance with another business model, specialty in a certain wet sustainability of essential capabilities, differentiation, convertibility, customer orientation, revenue stream, newness, innovation leadership: and vision sharing are identified in those respective domains, and then the traits are classified into five dimensions such as interlinkageableness, valueness, functionalness, preemptiveness, and goalness by their characteristics. Generating items are continued on the basis of operationalization. Confirmatory factor analysis is performed in order to develop validated instrument with LISREL measurement model. Finally the instrument is developed through the previous procedure. The implication of this study is the first empirical effort to assess business model. The resulting instrument can be used with dependent variables in the future study related to business model. And the establishment of construct of business model is able to make a basis to rise an additional issue consequently. In the practical side, the instrument also can be employed as an assessment framework that can assess whether the expected value success or not. The instrument with the measurement can be used on competitor's business model, In. When an investment into a i-m with a specific business model, these instrument developed can be presented as the basic framework of assessment.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.48
• /
• pp.64-74
• /
• 2009

Measurement is a essential part in all kinds of industry, especially in manufacturing. But until now, measurement hasn't been located to the core of manufacturing in domestic. This improvement guide line for the multilateral problems of measuring instrument investigation of small and medium-sized enterprises. To use measuring treat it must be accustomed with the structure, the performance, the method. must be corrected periodically. The correcting-schedule is established with accuracy, stability, purpose, condition, and frequency.

• 한국경영정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.23-28
• /
• 2007

In e-Business environment, end-user e-Business capability is necessitated for performing his or her given tasks and improving his or her business performance in an enterprise of e-Business environment. An instrument of an end-user e-Business competency is extracted from the major components of a general competency. Through a pilot test, this study performed factor analysis, and proposed a 16-item instrument that can measure an end-user e-Business competency in e-Business environment. The application of the instrument is confirmed by applying it to measuring e-Business competency of end-users in an enterprise of e-Business environment and by presenting the measurement results for them.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.281-285
• /
• 1996

In this paper, I made visual inspection system using Vision Board and it is consist of an illuminator (a fluorescent lamp), image input device(CCD(Charge)Coupled Device) camera), image processing system(Vision Board(FARAMVB-02), image output device(videomonitor, printer), a measuring instrument(TELMN1000). Length measurement by visual inspection system is used 100mm gauge block instead of calculating distance between camera and object, it measured horizontal and vertical length factor from 400mm to 650mm by increasing 50mm. In this place, measured horizontal and vertical length factor made use of length measurement of a injection. A measuring instrument used to compare a measured length of a injection visual inspection system with it. In conclusion, length measurement of a injection compared a measuring instrument withvisual inspecion system using length factor of 100mm guage block. Maximum error of length compared two devices a measuring instrument with visual inspection system is 0.55mm. And operation program is made up Borland C++ 3.1. By changing, it is applied to various uses.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.289-294
• /
• 1994

A new type of electrogoniometer to measure the three dimensional motion of the human knee joint was developed. This instrument is composed of six potentiometers: four arranged for two universal joints, one for pin joint, and one for axial rotation measurement. The voltage change in six potentiometers were collected through A/D converter for acquisition, storage and analysis. With a developed instrument, gait analysis was performed. Compared to earlier developed triaxial type goniometer, new instrument shows its convenience in application and accuracy in measurement.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1751_1752
• /
• 2009

The accurate measurement of soil resistivity and earthing system resistance is fundamental to electrical safety. However, geological and meterological factors can have a considerable effect on the accuracy of conventional measurements and the validity of the measurement methods. This paper presents optimization method of dc resistivity data acquisition system using ERT.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.217-223
• /
• 2008

Measurement is used for evaluation of product or process exactly. If it couldn't measured correctly, Quality-cost must be raised and it would be hard to improve product quality. So, this study suggests improvement guide line for the multilateral problems of measuring instrument operation based on the investigation of 157 small and medium-sized enterprises in February, 2008. To use inspection gig correctly, man who treat it must be accustomed with the structure, the performance, the method. The inspection gig is selected properly for the measurement goal. If not, results couldn't be correctly or wasted time, efforts, and costs. When selecting a inspection gig, the locating, the clamping, and the efficiency must be considered.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.554-559
• /
• 2003

A newly developed contact angle measurement instrument by laser beam projection allows for rapid and direct determination of contact angles. The instrument may have a possibility to characterize newly developed nano-fibers. When the laser beam impinges on an edge of an interface of liquid and solid, projected beam were split across and made two straight lines on a tangent screen. From the result, it could measure the contact angle directly by reading the angle between two split beams. The purpose of this study was to prove reliability and reproducibility of the contact angle measurement instrument by laser beam projection compare to the conventional one by microscope through the comparative experiment and questionnaire. Test samples were selected by consideration of hydrophilic and hydrophobic, such as nylon 6 and polypropylene, respectively. The laser contact angle measurement has accurate, fast and convenient method to measure contact angle, and it can be a unique method to characterize nano-fibers.