• 멤브레인
• /
• 제21권2호
• /
• pp.177-192
• /
• 2011

바이오 가스의 분리와 정제를 위해 셀룰로오스 트리아세테이트(CTA) 고분자를 이용하여 중공사형 기체분리막을 상분리법에 의해 제조하고, 제조된 기체분리막을 사용하여 유효 막면적이 0.17 $m^2$인 중공사형 기체분리막 모듈을 제조하였다. 제조된 기체분리막 모듈의 순수 기체투과도틀 메탄, 산소, 이산화탄소에 대하여 측정하였다. 메탄의 투과도는 평균 0.46 GPU를 나타내었으며, 이산화탄소의 투과도는 평균 18.52 GPU였으며 이때 ${\alpha}CO_2$/$CH_4=40.4$를 나타내어 매우 높은 선택도를 나타내었다. 순수 가스 투과 테스트 후 혼합 가스에 대한 분리 정제 테스트를 4가지 모사가스에 대하여 진행하였으며 1 stage, 2 stage, 3 stage로 기체분리막 모듈을 구성하여 stage cut의 변화에 따른 각 부분에서 발생되는 기체의 농도 및 유량을 측정하였다. 1 stage에서는 stage cut이 상승함에 따라 메탄의 농도가 상승하는 것을 알 수 있었으며, 메탄 회수 효율은 떨어지는 것을 알 수 있었다. 2 stage 테스트에서는 1 stage와 유사한 거동을 보이는 것을 알 수 있었으며 메탄의 회수 효율은 1 stage보다 상승하는 것을 알 수 있었다. 바이오 가스 내에 존재하는 메탄의 손실을 줄이기 위해 3 stage 테스트를 진행하였으며, 그 결과 메탄가스의 손실율을 5% 이내로 줄일 수 있는 모듈의 배열을 찾아내었다.

• 대한기관식도과학회지
• /
• 제10권1호
• /
• pp.35-40
• /
• 2004

Adhesion molecules have been implicated in tumor progression. In this study, we aimed to investigate serum soluble intercellular adhesion molecule-1 (ICAM-1) and sialic acid (SA) levels in oral cavity cancer and laryngeal cancer and correlate their levels with cancer progression. Method : The sera from 31 patients with advanced oral cavity cancer (5 at stage III, 10 at stage IV) and advanced laryngeal cancer (1 at stage III, 15 at stage IV) were extracted before treatment. The concentrations of ICAM-1 was measured by Endogen kit (measured absorbance at 490nm) and the concentration of SA was measured by Roche kit (measured absorbance at 550nm). Respectively, gained data was compared with those from a control group (n=12). Result : Mean serum ICAM-1 and SA levels were found to be higher in oral cavity cancer group and laryngeal cancer group than control group. But statistical meaning was at SA (p<0.001, oral cavity cancer and laryngeal cancer versus control). Conclusion : These data reveal that the significant correlations serum SA level in advanced oral cavity cancer and laryngeal cancer. Serum ICAM-1 level was higher at advanced oral cavity cancer and laryngeal cancer than at control group but that was not significant.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.285-291
• /
• 1991

본 연구에서는 800 1pm인 대유량을 처리하고 공기중 1.8~4.5$\mu\textrm{m}$ 입자를 효율 적으로 선별하여 농축시키는 슬릿형 2단 가상충돌기를 설계 제작하고 그 성능이 평가 되었다. 즉, 첫째단과 둘째단에서 4.5$\mu\textrm{m}$과 1.8$\mu\textrm{m}$이 각각 50%의 효율로 분리되도록 설계되었다. 즉, 첫째단과 둘째단에서 4.5$\mu\textrm{m}$과 1.8$\mu\textrm{m}$이 각각 50%의 효율로 분리되도 록 설계한다. 설계인자(design parameter)들을 결정하기 위하여 먼저 슬릿형 노즐의 1단 가상충돌기의 분리효율(separation efficiency)에 대한 실험을 통하여 50% 커트오 프 Stokes수를 구하고, 이를 기초로 하여 2단 가상 충돌기의 주요치수와 작동조건을 결정하였다.

• 터널과지하공간
• /
• 제15권3호
• /
• pp.169-176
• /
• 2005

경기도 광주군에 건설된 상업적 규모의 지하암반 저장고인 '곤지암 지하암반 저장고' 에 대한 약 7년간 운영중에 측정된 결과를 분석하였다. 운영 초기 에 투입되었던 에너지와 저장고 주변의 온도가 안정화된 이후의 에너지를 비교하여 에너지 소비의 변화경향을 분석하였다. 초기 냉동기 설계에 필요한 용량과 저장고 운영에 필요한 냉동기 용량을 비교하여 초기 냉동시스템 설계 시 고려할 점에 대해 논하였다. 7년간 암반 내 지중온도 변화 양상을 분석하여, 암반 내 지하수가 동결될 때에 소요되는 추가적인 에너지에 대해 논하고, 현재 암반온도 분포 상황을 초기의 온도분포를 예측한 FLAC 수치해석 결과와 비교하였다. 냉동기 가동시간에 따른 투입된 열유량과, 2차원, 3차원 수치해석에 의한 열유량을 비교하여 수치해석에 의한 열유량 예측의 정확성에 대해 논하였다.

• Neonatal Medicine
• /
• 제28권2호
• /
• pp.65-71
• /
• 2021

Purpose: We investigated whether consecutive levels of new emerging renal biomarkers, including serum cystatin C (CysC) and urinary neutrophil gelatinase-associated lipocalin (NGAL)/creatinine (Cr) ratio, were affected by postconceptional age in very-low-birth-weight (VLBW) infants. Methods: Repeatedly measured samples for each infant were divided into four groups according to postnatal age: at birth (stage I), 3 to 7 days postnatally (stage II), 8 to 28 days postnatally (stage III), and >28 days postnatally (stage IV). The association between renal biomarkers and postconceptional age was assessed using Pearson's correlation coefficient, and the mean values of renal biomarkers in the four stages were compared using repeated-measures analysis of variance. Results: For samples measured at birth, serum CysC (r=-0.358, P=0.032) and urinary NGAL/Cr ratio (r=-0.522, P=0.001) were negatively correlated with gestational age, whereas serum Cr (r=0.148, P=0.390) was not. In addition, for all samples measured, serum CysC (r=-0.209, P=0.012), urinary NGAL/Cr ratio (r=-0.536, P<0.001), and serum Cr (r=-0.311, P<0.001) were negatively correlated with postconceptional age. Compared with the mean values of the postnatal age-specific stages, serum CysC showed no significant differences in any of the four stages. However, the urinary NGAL/Cr ratio in stage IV was significantly different from those in stages I to III. Conclusion: Although urinary NGAL/Cr ratio and serum CysC were negatively correlated with postconceptional age considering renal development, serum CysC showed no significant differences in any of the four postnatal age-specific stages. Urinary NGAL/Cr ratio at >28 days postnatally seems to be more affected by postconceptional age than serum CysC in VLBW infants.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.111-119
• /
• 2006

The ultra-precision stage is demanded for some industrial fields such as semiconductor lithography, ultra-precision machining, and fabrication of nano structure. A new stage was developed for those applications in order to obtain nano meter resolution. This stage consists of symmetric double parallelogram mechanism using flexure hinges. The mechanical properties such as strength of the flexures and deformations along the applied force were analyzed using FEM. The stage is actuated by a piezoelectric actuator and its movement was measured by a ultra-precision linear encoder. In order to improve positioning performance, a PID controller was designed based on the identified second order transfer function. Experimental results showed that this stage could be positioned within below 5 nm resolution irrespective of hysteresis and creep by the controller.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.35-40
• /
• 2006

This paper shows that the effect of exposing on the top area and a solution which using a water circulation system. Semiconductor substrate stage is made from Aluminum and is repeated the sequence of exposing (150), turning OFF shutter, taking 30 sec. interval at the top area of stage. So the temperature of substrate temperature rises continuously. On this, we made a waterway at the inner part of the substrate stage and operated a water circulation system. We measured the temperature of a substrate stage surface with a thermocouple attached to the substrate stage. To analyze the top area's temperature, we used Analysis Program ANSYS for analysis and 3D CAD program Solid-Works for modeling.

• 미생물학회지
• /
• 제19권1호
• /
• pp.8-13
• /
• 1981

The content of sulfhydryl compounds in Chlorella cells during the life cycle in the synchronous culture is determined spectrophotomatically at 250nm(pH7.0) using p-CMB as SH-reagent. The changes in the content of-SHl compounds and protein in Chlorella cells is measured during the life cycle in connection with cell division and analyzed. 1) The amounts of total ninhydrin reactive substance increased with growth of cells but increased the more at the $L_4$ stage(cytokinesis stage) than at the $L_2$ stage (nuclear division stage). 2) The sulfhydryl content of Chlorella cells increased strikingly at the $L_2$ stage and decreased markedly at the $L_4$ stage. 3) The amounts of values -SH/protein showed a peak at the $L_2$ stage. The increase of the amount of total-SH compounds of cells during the nuclear division period was considered to be caused by the weighty roles of protein-SH groups for the formation of nuclear division apparatus and for the enzyme activity.

• International Journal of Aerospace System Engineering
• /
• 제1권1호
• /
• pp.29-33
• /
• 2014

A displacement measurement system that uses fiber-optical common-path interferometry has been developed. The system includes fiber-optic devices and a collimator attached to a linear translation stage. The interferometry effect was detected with a photodetector whose signal was measured on an oscilloscope. Experiments showed that vibration of the stage disturbed the signal by causing nanoscale interference. Under stable conditions, the measured distance was the almost the same as the value calculated from the linear translation stage parameters.

• 한국소음진동공학회논문집
• /
• 제19권10호
• /
• pp.1021-1027
• /
• 2009

Finite element models of dynamic systems can be updated in two stages. In the first stage, mass and stiffness matrices are updated neglecting damping. In the second stage, a damping matrix is estimated with the mass and stiffness matrices fixed. Methods to estimate a damping matrix for this purpose are proposed in this paper. For a system with proportional damping, a damping matrix is estimated using the modal parameters extracted from the measured responses and the modal matrix calculated from the mass and stiffness matrices from the first stage. For a system with non-proportional damping, a damping matrix is estimated from the impedance matrix which is the inverse of the FRF matrix. Only one low or one column of the FRF matrix is measured, and the remaining FRFs are synthesized to obtain a full FRF matrix. This procedure to obtain a full FRF matrix saves time and effort to measure FRFs.