• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.1018-1021
• /
• 2003

This dissertation is reference to measure visual information about the configuration of magnetic field automatically and materialize the new magnetic field mapping system for the rapid and clear measure by using of the mediocrity orthogonal robot in the three- dimensional space required the measure of magnetic field concurrently. The measuring sensor is composed to be available for the measure of three-dimensional direction of magnetic field by vertically conjoining each of three hall sensors utilized of the hall effect and installed Gaussmeter, which is devised to receive the sensor result and the robot controller, away from the measuring robot in order to minimize the affection of magnetic field. Also, the controller and Gaussmeter are composed of Use interface, RS-232C and IEEE-488.2 communication. Interface system is written in NI's LabVIEW and composed to be able to set up a measuring area, the measuring number of times, two and three-dimensional graph, the velocity of robot and the magnetic field distribution graph of each element by inputting parameters. The materialized magnetic field mapping system expert the collection of the data easily and the effect of utilizing data.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.35-42
• /
• 2005

There is lack of data for the amount of vertical bone in the midpalatal region for miniscrew implantation. The purpose of this study was to measure the structure of the midpalatal suture area using CT image and V-works 4.0 program (Cybermed Inc, Seoul, Korea). CT images of 14 male and 14 female adults were reconstructed. In detail, it was 1) to measure the length of maxilla on the midsagittal plane 2) to measure vertical bone height in the midpalatal area 3) to establish the zone of safety for miniscrew implantation. The following results were obtained. The mean length of ANS-PNS was 51.08mm in males and 47.34mm in females. There was a statistically significant difference between males and females (p<0.05). The vertical bone height of the midpalatal suture area was above 0mm except for 6mm posterior from the central Point of ANS-PNS in males The zone of safety was located 19.43mm posterior from the ANS in males while it was 17.62mm in females along the palatal plane. These results support that the safety zone of the midpalatal area is suitable for screw implantation. Midpalatal miniscrew implantation is a powerful tool in modern orthodontics Through many applications. it can expand the modern orthodontic field.

• Korean Journal of Child Studies
• /
• v.8 no.1
• /
• pp.31-48
• /
• 1987

The purpose of this study was to compare sex role typing in relation to self-concept in 6th graders by to their residential area. The subjects were 6th grade children: 126 boys and 127 girls. The sample included 85 (42 boys, 43 girls) from a farming area, 111 (62 boys, 49 girls) from Pohang City, and 57 (22 boys, 35 girls) from a fishing area. The instruments used in this study were Shimer's self-concept measure (Suh, 1980) and Bern Sex Role Inventory (Byun, 1979). Statistical analysis of obtained data was by $X^2$ test; 2 (sex) x 3 (residential area) x 4 (sex role category) ANOVA; and $Scheff\acute{e}$ test. The results were as follows: Girls from the fishing area were more masculine than girls from other areas. Androgynous children and urban children demonstrated a higher self-concept. There was no difference in level of self-concept between urban boys and girls, but boys in both farming and fishing areas demonstrated a higher level than girls. In all 3 areas, androgynous children evaluated themselves positively whereas undifferentiated children evaluated themselves negatively. There were significant differences in self-concept according to sex, living area, and sex role category. In the city, the feminine category was related to a negative self-concept while the masculine category was related to a negative self-concept in the fishing area. But in the farming area, feminine boys demonstrated a higher self-concept whereas feminine girls demonstrated a lower self-concept.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.4 s.36
• /
• pp.292-304
• /
• 1990

The surface change of upperarm and shoulder blade area are caused by the extensive upper limb movement, thus it is necessary to measure the amount of change for constructing the clothing. Moire photography was taken after plastic casters of upperarm and shoulder blade area was prepared. 1. For the shoulder blade area, subjects showed the same change of surface area for the various limb positions, wherease, for the upperarm only at the $0^{\circ}\;and\;180^{\circ}$ limb position, same change was observed. 2. As the movement of the upperarm was increased, surface area of axillary part was increased and that of shoulder part was decreased. 3. To make a bodice pattern, the minimum size of the back with the ease were $\frac{B}{4}$+3.13 cm R for normal wear and $\frac{B}{4}$+5.75 cm for active wear. 4. As the movement of the arm was increased, the cross section for the upperarm were changed to elliptical shape. 5. For each horizontal basic line, there was a positive correlation between the amount of change of shoulder blad area and that of upperarm area.

• Journal of Environmental Impact Assessment
• /
• v.4 no.1
• /
• pp.59-64
• /
• 1995

Environmental Impact Assesment(EIA) is composed of various procedures, such as screening, scoping, inventory survey, prediction, assessment, mitigation measure, alternative assessment, and post management. Remote sensing introduced lately begins to be applied ecosystem and land use in inventory survey and assessment of EIA. This study explains on land use classification, buffering analysis of residential area, and overlaying analysis of odor predictive data with residential area for application to EIA with remote sensing data. Residential area extracted from land use classification of remote sensing provides effectively buffering analysis of residential area in selection of landfill site with GIS. It could assess also residential effect to an offensive odor by overlaying analysis. Application methods in EIA should be enlarged to assess effectively.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.4
• /
• pp.267-271
• /
• 2011

I developed an enhanced correction method for Ricean bias which occurs in linear polarization measurement. Two known methods for Ricean bias correction are reviewed. In low signal-to-noise area, the method based on the mode of the equation gives better representation of the fractional polarization. But a caution should be given that the accurate estimation of noise level, i.e. ${\sigma}$ of the polarized flux, is important. The maximum likelihood method is better choice for high signal-to-noise area. I suggest a hybrid method which uses the mode of the equation at the low signal-to-noise area and takes the maximum likelihood method at the high signal-to-noise area. A modified correction coefficient for the mode solution is proposed. The impact on the depolarization measure analysis is discussed.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.243-256
• /
• 1997

The purpose is to measure the level of quality of life and find the degree of importance of various elements of life domains taking into the area of residence and sex account. this paper is assuming that quality of life is a function of not only of the level of satisfaction but also of the relative importance of the elements. An instrument based on previous research was applied to 686 respondents living in Kyungsan area. Regression analysis indicates that the relative importance of the elements differes between the area of residence as well as the sex of the respondents. Similarities and differences between those factors are discussed and policy implications are porvided.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.11 s.254
• /
• pp.1335-1347
• /
• 2006

Surface energies calculated from measured contact angles between several solutions and test samples, such as Si wafer, $Al_2O_3$, $SiO_2$, PTFE(Polytertrafluoroethylene), and DLC(Diamond Like Carbon) films, based on geometric mean method and Lewis acid base method. In order to relate roughness to adhesion force, surface roughness of test samples were scanned large area and small by AFM(Atomic Force Microscopy). Roughness was representative of test samples in large scan area and comparable with AFM tip radius in small scan area. Adhesion forces between AFM tip and test samples were matched well with order of roughness rather then surface energy. When AFM tips having different radius were used to measure adhesion force on DLCI film, sharper AFM tip was, smaller adhesion force was measured. Therefore contact area was more important factor to determine adhesion force.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.35-40
• /
• 1992

A recently developed new technique for measuring the fraction of wetted area has applied to pool boiling of water. The basis of the new applied technique of ultrasonic makes use of the reflection of ultrasonic from the vapour surface to measure the fraction of wetted area values. The results are the measured fraction of wetted area values in nucleate and transition boiling and the pool boiling curve for water under steady state conditions. The measurement of this paper shows a fraction of wetted areaf around 0.98 at the critical heat flux for water.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.201-210
• /
• 2003

In this paper, we propose a new binocular stereo correspondence method by maximizing a fitness formulated by integrating two constraints of edge similarity and disparity smoothness simultaneously. The proposed stereopsis focusing to measure distances to leading vehicles on roads uses intensity gradients as matching attribute. In contrast to the previous work of area-based stereo matching, in which matching unit is a pixel, the matching unit of the proposed method becomes an area itself which is obtained by selecting a series of pixels enclosed by two pixels on the left and right boundaries of an object. This approach allows us to cope with real-time processing and to avoid window size selection problems arising from conventional area-based stereo.