• 소성∙가공
• /
• 제16권4호
• /
• pp.313-316
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Co-fired Ceramic(LTCC) technology can be employed to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and/or resistive pastes on. These single green-sheets must be laminated together and fired at the same time. Main function of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used. In order to measure the entire film area using several scanning steps, an overlapping method is used.

• 한국시뮬레이션학회논문지
• /
• 제9권2호
• /
• pp.89-102
• /
• 2000

In this paper, we consider an optimal allocation of constant service efforts in queueing network to maximize the system throughput. For this purpose, using the perturbation analysis, we apply a stochastic optimization algorithm to two types of queueing systems. Our simulation results indicate that the estimates obtained from a stochastic optimization algorithm for a two-tandem queuing network are very accurate, and those for closed loop manufacturing system are a little apart from the known optimal allocation. We find that as simulation time increases for obtaining a new gradient (performance measure with respect to decision variables) by perturbation algorithm, the estimates tend to be more stable. Thus, we consider that it would be more desirable to have more accurate sensitivity of performance measure by enlarging simulation time rather than more searching steps with less accurate sensitivity. We realize that more experiments on various types of systems are needed to identify such a relationship with regards to stopping rule, the size of moving step, and updating period for sensitivity.

• 한국전자통신학회논문지
• /
• 제8권4호
• /
• pp.555-560
• /
• 2013

본 논문에서는 거리측정, 로그전력, 실효치 방법에 의하여 유성음, 무성음, 묵음 구간을 검출하여, 서브밴드 필터에 의한 잡음제거 알고리즘을 제안한다. 제안한 알고리즘은 각 프레임에서 서브밴드 필터를 사용하여 잡음으로 오염된 음성신호로부터 백색잡음 및 도로잡음의 스펙트럼을 차감하는 방법이다. 본 실험에서는 Aurora-2 데이터베이스에 포함된 음성신호와 잡음신호를 사용하여 스펙트럼 차감 알고리즘의 결과를 나타낸다. 잡음에 의하여 오염된 음성신호에 대하여 신호대잡음비를 사용하여 본 알고리즘이 유효하다는 것을 확인한다. 실험으로부터 백색잡음에 대하여 평균 2.1 dB, 도로잡음에 대하여 평균 1.91 dB의 출력 신호대잡음비가 개선된 것을 확인할 수 있었다.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.601-614
• /
• 2012

Since the optimized use of sonar systems available for detection is a very practical problem for a given ocean environment, the measure of mission achievability is needed for operating the sonar system efficiently. In this paper, a theory on Measure Of Effectiveness(MOE) for specific mission such as detection is described as the measure of mission achievability, and a recursive Cumulative Detection Probability(CDP) algorithm is found to be most efficient from comparing three CDP algorithms for discrete glimpses search to reduce computation time and memory for complicated scenarios. The three CDPs which are MOE for sonar-maneuver pattern are calculated as time evolves for comparison, based on three different formula depending on the assumptions as follows; dependent or independent glimpses, unimodal or non-unimodal distribution of Probability of Detection(PD) as a function of observation time interval for detection. The proposed CDP algorithm which is made from unimodal formula is verified and applied to OASPP(Optimal Acoustic Search Path Planning) with complicated scenarios.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제2권2호
• /
• pp.111-123
• /
• 1998

Performance index is a measure of telecommunications network integrating reliability and capacity simultaneously. This paper suggests a computerized algorithm evaluating a performance index for telecommunications network and compares this computerized algorithm with the algorithm[1] by experimenting on several benchmarks. A computerized algorithm proposed by this paper is superior to the algorithm[1] with respect to the computation time for most of the benchmarks.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.86-94
• /
• 2009

This paper deals with the creation of a new, low-cost point/position tracking system that can measure deformations in engineering structures with simple commercially widespread cameras. Though point tracking systems do exist today, such as Stereo Pattern Recognition (SPR) and Projection Moir$\acute{e}$ Interferometry (PMI) systems, they are far too costly to use to analyze small, simple structures because complex optical components such as large flashes, high-resolution cameras and data acquisition systems with several computers are required. We developed a point tracking system using commercial cameras. This system used IR LEDs and commercial IR CCD cameras to minimize the interference posed by other extraneous light sources. The main algorithm used for this system is an optical point tracking algorithm, which is composed of the point extraction algorithm and the point matching algorithm for 3-D motion estimation. a series of verification tests were performed. Then, the developed point tracking system was applied to measure deformations of an acrylic plate under a mechanical load. The measured deformations of the acrylic plate matched well with the numerical analysis results. The results indicate that the developed point tracking system is reliable enough to measure continuous deformed shapes of various engineering structures.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.51-54
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Cofired Ceramic (LTCC) technology can be defined as a way to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and / or resistive pastes on. These single green-sheets have to be laminated together and fired in one step all. Main functionality of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used for developing the algorithm. In order to measure the entire film area using several scanning steps, the overlapping method is used. In the process of development of the algorithm based on the image processing and analysis, strong background technology and know-how have been accumulated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.321-324
• /
• 1997

In this paper, Active Noise Control(ANC) algorithm is proposed based on the estimated frequency estimator of the reference signal. The conventional feedforward ANC algorithms should measure the reference and use it to calculate the gradient of the squared error and filter coefficients. For ANC systems applied to aircrafts and passenger ships, engines from which reference signal is usually measured is so far from seats where main part of controller is placed that the scheme might be difficult to implement or very costly. Feedback ANC algorithm which doesn't need to measure the reference uses the error signal to update the filter and is sensitive to unexpected transient noise like a sneeze, clapping of hands and so on The proposed algorithm estimates frequencies of the desired signal in real time using adaptive notch filter. New frequency estimation algorithm is proposed with the improved convergence rate, threshold SNR and computational simplicity. Reference is not measured but created with the estimated frequencies. It has strong similarity to the conventional feedback control because reference is made from error signal. Enhanced error signal is used to update the controller for better performance under the measurement noise and impact noise. The proposed ANC algorithm is compared with the conventional feedback control.

• 한국통신학회논문지
• /
• 제29권5C호
• /
• pp.627-631
• /
• 2004

음성인식 모델상의 GPDFs(Gaussian Probability Density Functions)을 효율적으로 군집화 할 수 있는 알고리즘이 제안되었다. 제안된 알고리즘은 데이터 사이의 거리 척도로 발산 거리를 사용하는 새로운 형태의 CNN(Centroid Neural Network)으로, 제한된 자원을 가지는 H/W환경의 음성인식에서 메모리 사용량을 축소하는 응용에 대한 실험 결과, 음성인식 모델인 CDHMM(Continuous Density Hidden Markov Model)에서 기존의 Dk-means(Divergence-based k-means)알고리즘을 이용한 방법과 비교하여 인식 성능의 유지와 함께 약 31.3％의 GPDFs를 더 축소할 수 있었고, 군집화 알고리즘을 적용하지 자은 전체 GPDFs를 사용한 경우와 비교해서 인식 성능의 유지와 함께 약 61.8％의 GPDFs를 압축할 수 있었으며, SNR 10㏈ 잡음 데이터에 대한 성능평가에서도 인식 성능이 유지될 수 있었다.

• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.715-723
• /
• 2002

This paper is to show a clustering application of a density estimation method that utilizes the Gaussian mixture model. We define "closeness measure" as a clustering criterion to see how close given two Gaussian components are. Closeness measure is defined as the ratio of log likelihood between two Gaussian components. According to simulations using artificial data, the clustering algorithm turned out to be very powerful in that it can correctly determine clusters in complex situations, and very flexible in that it can produce different sizes of clusters based on different threshold valuesold values