• 한국건설관리학회논문집
• /
• 제10권2호
• /
• pp.65-74
• /
• 2009

20년 이상 경과된 노후 공동주택의 세대수는 향후 10년 이내에 350만 세대 이상으로 급격히 증가될 전망이고 이에 대한 대책으로 리모델링이 활성화되고 있다. 주차장확대는 리모델링에 대한 요구사항 중 큰 비중을 차지하고 있다. 주차장확대 중 지하주차장에서 공동주택의 주동으로 진입하는 방법(이하 '주동진입방법'이라고 함)은 기존 엘리베이터의 수직 확장, 주차공간의 대소, 공사기간과 공사비 등에 매우 큰 영향을 미친다. 그러나 공동주택의 지하주차장 확대 시 단지특성, 주동과 주차장의 연계성, 주민의 요구 등에 대한 정확한 평가 없이 경험적인 방법으로 주동진입방법이 결정되고 있다. 이러한 문제를 해결하기 위해서는 체계적이고 합리적인 방법과 절차에 따라 주동진입방법을 선정하여 지하주차장을 확대할 필요가 있다. 본 연구에서는 합리적인 의사결정을 위해 '지하주차장 리모델링 공사시 주동진입방법 선정 모델'을 제시하였다. 연구방법은 주차장확대 방식과 주동진입방법에 대해 조사하였다. 조사된 자료를 바탕으로 전문가들과의 심층면담을 통해 주동진입방법별 특징을 분석하였고 주동진입방법 선정 영향요인을 도출하였다. 영향요인은 시공성, 편의성, 경제성이 도출되었다. 그 후 AHP기법을 적용하여 선정된 영향요인에 대한 가중치를 산정하였다. 가중치 산정 결과 편의성이 가장 높은 값을 받아 주동 진입방법 선정에 제일 중요한 고려사항임을 밝혔다. 또 리모델링이 가능한 단지를 선정하여 주동진입방법별 현장적용성을 평가한 후 단지에 가장 적합한 주동진입방법을 제시하였다. 본 연구는 노후공동주택의 지하주차장 리모델링 공사시 주동진입방법 선택을 위한 참고자료로 활용될 것이다.

• 한국콘텐츠학회논문지
• /
• 제19권5호
• /
• pp.64-73
• /
• 2019

본 연구는 전문건설업체의 경쟁력을 평가하기 위해 DEA모형을 활용하여 효율성을 분석하였다. 분석대상기업은 전문건설업 상장업체와 외감업체로 2010년부터 2017년까지 연속자료가 존재하는 300개 기업을 대상으로 하였다. 특히, 전문건설업 유형별 효율성을 비교, 분석하여 그 시사점을 찾는데 중점을 두었다. 의미 있는 분석결과는 다음과 같다. 첫째, 전문건설업체의 효율성은 전반적으로 종합건설업 등과 비교하면 효율성 값이 낮게 분석되었다. 둘째, 전문건설업 유형별 효율성은 시설물축조 및 해체 전문공사업이 가장 높게 나타났다. 이는 해당 업종인 철근 콘크리트공사업, 비계 구조물해체공사업 등이 전문건설업 내에서 상대적으로 효율적임을 의미한다. 셋째, 전문건설업 효율성은 건설경기에 영향을 받는다. 건설경기가 확장국면에 있을 때는 효율성 값이 높고, 수축국면에서는 낮은 효율성 값을 나타내었다. 마지막으로 규모수익성 분석에서 전문건설업은 DRS로 분석되는 경우가 가장 많았다. 이는 규모 확대보다 규모 축소를 통해 기업의 효율성을 높이는 것이 바람직하다는 것을 의미한다.

• 디자인학연구
• /
• 제16권2호
• /
• pp.355-364
• /
• 2003

본 연구는 디자인의 프로세스를 2단계모델과 3단계모델로 구분하고 이들 각 모델의 효율성에 대하여 검증하였다. 2단계모델은 디자이너의 창의적인 마인드를 바탕으로 주관적이고 감각적으로 수행하는 디자인활동을 의미하며 반대로 3단계모델인 경우 객관적이고 논리적인 소비자 중심적자인 활동을 의미한다. 기존 연구에서는 이러한 두 가지 모델에 대하여 상대적으로 어떤 모델이 더 효과적인가에 대하여 의견의 일치를 이루어내지 못하였다. 본 연구에서는 이들 두 모델에 대하여 시장선도전략(market leader strategy)과 시장탐색전략(market seeker strategy)의 개념을 통해 각각의 효율성을 제시하였다 즉, 실증분석을 통해 명성브랜드라면 2단계모델을 바탕으로 한 시장선도전략이 그리고 비명성브랜드인 경우에는 3단계 모델을 바탕으로 한 시장탐색전략이 더 효율적이라는 상황적 입장을 제시하였으며 다만 어떤 상황에서 어떤 모델이 더 효율적인지에 대한 다각적인 검토가 더 필요하다고 제안하고 있다.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.125-136
• /
• 2016

The external R&D, which includes the adoption of the external technology and knowledge in addition to the internal R&D, is one of important factors for the innovation. Especially for small and medium-sized enterprises (SMEs), the external R&D has been considered as a key factor to carry out the innovation more efficiently due to the limitations of their resources and capacities. However, most of extant studies related to external R&D have focused on analyzing the influence of external R&D on innovation outputs or outcomes. Only a few studies have explored the impact of external R&D on the innovation efficiency. This study therefore investigates whether the external R&D effects the industry's innovation efficiency and productivity. On this study, we used Korean manufacturing industry data of SMEs from 2012 to 2014 and employed a global Malmquist productivity analysis technique, which is based on the Data Envelopment Analysis (DEA), to assess the innovation efficiency and productivity. Innovation performances of external R&D group and internal R&D group are compared. Then, the sectoral patterns of both innovation efficiency and productivity are analyzed with respect to the technological intensity, which is introduced by OECD. The results show that the gap of innovation efficiency between external and internal R&D groups has gradually decreased because of the continuous improvement of the external R&D group's performance, while the external R&D group lag behind the internal R&D group. In addition, patterns of the innovation efficiency and productivity change were different depending on the technological intensity, which means that the higher the technological intensity, the greater the effect of external R&D.

• 한국환경보건학회지
• /
• 제33권2호
• /
• pp.145-149
• /
• 2007

The range of reduction rates of airborne bacteria concentration at 6 hrs, 12 hrs, 24 hrs and 48 hrs, which means a storage time until input of agar media into incubator after air sampling with an impactor. were 15-20%, 25-40%, 35-50% and 55-70%, respectively, compared to initial concentration. Types of agar media and storage thermal condition did not significantly affect a collection efficiency of impactor in terms of evaluating airborne bacteria level (p>0.05). To better improve the impactor's collection efficiency of airborne bacteria, based on the result of this study, it is recommended that the vicinity of $25^{\circ}C$ should be sustained until input of agar media into incubator after air sampling.

• 동력기계공학회지
• /
• 제13권4호
• /
• pp.56-61
• /
• 2009

In recent years, since the continuing increase in the capacity in personal computer such as the optimal performance, high quality and high resolution image, the computer system's components produce large amounts of heat during operation. This study analyzes and investigates the ability and efficiency of a cooling system inside a computer by means of central processing unit (CPU) and power supply cooling fan. This research was conducted to enhancement of efficiency of the cooling system inside the computer by making a structure which produces different air pressures in an air inflow tube. Consequently, when temperatures of the CPU and room inside computer were compared with a general personal computer, temperatures of the tested CPU, the room and the heat sink were as low as $5^{\circ}C$, $2.5^{\circ}C$ and $7^{\circ}C$ respectively. In addition to, revolution per minute (RPM) was shown as low as 250 after 1 hour operation. This research explored the possibility of enhancing the effective cooling of high-performance computer systems.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.16-23
• /
• 2001

Hydraulic transport of fines up to the surface of flotation cell was supposed to be a mechanism of fines fractionation through the froth-flotation. Efficient fractionation of fines means efficient skimming out of flotation rejects as much as possible with least long fiber loss. The selectivity of fines fractionation was found to be mainly affected by long fibers flocculation degree in this study. Lack of sufficient flocculation of long fibers could lead to extensive loss of long fibers. It was also found that higher flotation flux caused higher flotation reject as well as the increase of long fiber loss, but did not affect the fine content ratio in the flotation reject. We controlled the flotation flux and the stock consistency, and chose a cationic polymer to maximize the flocculation of long fibers and to increase the amount of flotation reject. The highest efficiency of fines fractionation was obtained at 1.3% of stock consistency and at 100L/min of flotation flux in our experimental set up. The cationaic polymer we chose was found to be very effective in fiber flocculation and flotation froth stabilization. New definitions of fractionation efficiency were introduced in this study to compare the results more clearly.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권1호
• /
• pp.29-38
• /
• 2001

In this paper, the defrosting characteristics of a PTC heating sheet is investigated by means of a defrosting heat source for the fin-tube heat exchanger in a refrigerator The defrosting characteristics of the PTC heating sheet are examined and compared with those of a conventional electric heater experimentally. It is found that the characteristics of the water draining rate with the defrosting time show a smoothly oscillating pattern when the PTC heating sheet Is used, and the drained water is completely melted. The defrosting efficiency of the PTC heating sheet is found to be about 75%, which is about 25% higher than that of the electric heater. Also, the reduction of the defrosting time and the increment of the defrosting efficiency may be obtained by improving the arrangement of the heating elements of the healing sheet. It is shown that the defrosting time of the PTC heating sheet increases linearly with the amount of frost, whereas the defrosting efficiency is nearly constant. When applying the PTC heating sheet to the refrigerating system, one should notice the fact that the defrosting performance of the PTC heating sheet may be degraded due to the repetitive operations.

• 태양에너지
• /
• 제2권2호
• /
• pp.11-20
• /
• 1982

This paper presents the experimental investigations of a system as a second treatment means to increase boiler efficiency and heat transfer from combustion gas to heating surfaces in the case of spray combustion. In order to reburn residual combustible components accelerate the burning rate of sprayed fuel droplets, improve the diffusion flame and delay the residence time of the flame, advice with slit type nozzles for spouting preheated supplementary air is used in this study. In the experiment, boiler efficiency and smoke concentration in the exhaust gas at given conditions are measured in both case of installing and not-installing device in the model of combustion chamber which was designed to be equipped with five surfaces. The results obtained in this experiment are as follows ; 1. The optimum values of air rate ${\lambda}$ are about 1.3 in both case. 2. The exhaust gas temperature in the case with device increases about $30{\sim}70^{\circ}C$ above that of the case without the device. 3. Boiler efficiency and reduction effect of smoke emissions are improved considerably.

• ETRI Journal
• /
• 제39권1호
• /
• pp.30-40
• /
• 2017

In this study, we investigate topology control as a means of obtaining the best possible compromise between the conflicting requirements of reducing energy consumption and improving network connectivity. A topology design algorithm capable of producing network topologies that minimize energy consumption under a minimum-connectivity constraint is presented. To this end, we define a new topology metric, called connectivity efficiency, which is a function of both algebraic connectivity and the transmit power level. Based on this metric, links that require a high transmit power but only contribute to a small fraction of the network connectivity are chosen to be removed. A connectivity-efficiency-based topology control (CETC) algorithm then assigns a transmit power level to each node. The network topology derived by the proposed CETC heuristic algorithm is shown to attain a better tradeoff between energy consumption and network connectivity than existing algorithms. Simulation results demonstrate the efficiency of the CECT algorithm.