• 제목/요약/키워드: Means-Efficiency

검색결과 1,775건 처리시간 0.041초

Highly Doped Nano-crystal Embedded Polymorphous Silicon Thin Film Deposited by Using Neutral Beam Assisted CVD at Room Temperature

  • 장진녕;이동혁;소현욱;홍문표
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.154-155
    • /
    • 2012
  • The promise of nano-crystalites (nc) as a technological material, for applications including display backplane, and solar cells, may ultimately depend on tailoring their behavior through doping and crystallinity. Impurities can strongly modify electronic and optical properties of bulk and nc semiconductors. Highly doped dopant also effect structural properties (both grain size, crystal fraction) of nc-Si thin film. As discussed in several literatures, P atoms or radicals have the tendency to reside on the surface of nc. The P-radical segregation on the nano-grain surfaces that called self-purification may reduce the possibility of new nucleation because of the five-coordination of P. In addition, the P doping levels of ${\sim}2{\times}10^{21}\;at/cm^3$ is the solubility limitation of P in Si; the solubility of nc thin film should be smaller. Therefore, the non-activated P tends to segregate on the grain boundaries and the surface of nc. These mechanisms could prevent new nucleation on the existing grain surface. Therefore, most researches shown that highly doped nc-thin film by using conventional PECVD deposition system tended to have low crystallinity, where the formation energy of nucleation should be higher than the nc surface in the intrinsic materials. If the deposition technology that can make highly doped and simultaneously highly crystallized nc at low temperature, it can lead processes of next generation flexible devices. Recently, we are developing a novel CVD technology with a neutral particle beam (NPB) source, named as neutral beam assisted CVD (NBaCVD), which controls the energy of incident neutral particles in the range of 1~300eV in order to enhance the atomic activation and crystalline of thin films at low temperatures. During the formation of the nc-/pm-Si thin films by the NBaCVD with various process conditions, NPB energy directly controlled by the reflector bias and effectively increased crystal fraction (~80%) by uniformly distributed nc grains with 3~10 nm size. In the case of phosphorous doped Si thin films, the doping efficiency also increased as increasing the reflector bias (i.e. increasing NPB energy). At 330V of reflector bias, activation energy of the doped nc-Si thin film reduced as low as 0.001 eV. This means dopants are fully occupied as substitutional site, even though the Si thin film has nano-sized grain structure. And activated dopant concentration is recorded as high as up to 1020 #/$cm^3$ at very low process temperature (< $80^{\circ}C$) process without any post annealing. Theoretical solubility for the higher dopant concentration in Si thin film for order of 1020 #/$cm^3$ can be done only high temperature process or post annealing over $650^{\circ}C$. In general, as decreasing the grain size, the dopant binding energy increases as ratio of 1 of diameter of grain and the dopant hardly be activated. The highly doped nc-Si thin film by low-temperature NBaCVD process had smaller average grain size under 10 nm (measured by GIWAXS, GISAXS and TEM analysis), but achieved very higher activation of phosphorous dopant; NB energy sufficiently transports its energy to doping and crystallization even though without supplying additional thermal energy. TEM image shows that incubation layer does not formed between nc-Si film and SiO2 under later and highly crystallized nc-Si film is constructed with uniformly distributed nano-grains in polymorphous tissues. The nucleation should be start at the first layer on the SiO2 later, but it hardly growth to be cone-shaped micro-size grains. The nc-grain evenly embedded pm-Si thin film can be formatted by competition of the nucleation and the crystal growing, which depend on the NPB energies. In the evaluation of the light soaking degradation of photoconductivity, while conventional intrinsic and n-type doped a-Si thin films appeared typical degradation of photoconductivity, all of the nc-Si thin films processed by the NBaCVD show only a few % of degradation of it. From FTIR and RAMAN spectra, the energetic hydrogen NB atoms passivate nano-grain boundaries during the NBaCVD process because of the high diffusivity and chemical potential of hydrogen atoms.

  • PDF

미국 네브라스카의 관개된 옥수수 농업생태계의 복사, 에너지 및 엔트로피의 교환 (Radiation, Energy, and Entropy Exchange in an Irrigated-Maize Agroecosystem in Nebraska, USA)

  • 양현영;요하나 마리아 인드라와티;앤드류 수커;이지혜;이경도;김준
    • 한국농림기상학회지
    • /
    • 제22권1호
    • /
    • pp.26-46
    • /
    • 2020
  • 이 연구의 목표는 관개된 옥수수 밭에서의 복사, 에너지 및 엔트로피의 교환을 평가하고 문서화하는 것이다. 열역학적 관점에서, 우리는 이 농업생태계를 태양 복사로 인해 시스템 내부와 외부 사이에 큰 경도(gradient)가 부여되는 열린 열역학적 시스템으로 간주하였다. 따라서 시스템이 평형에서 멀어질 때, 열역학적 원칙에 따라 비평형 소산 과정(nonequilibrium dissipative process)인 이 생태-사회시스템이 모든 생물, 물리, 화학 및 인위적 구성 요소를 사용하여 태양으로부터 주어진 경도에 저항하여 이를 감소시키도록 움직인다고 가정하였다. 이 가설을 검증하기 위한 첫 단계로서 미국 네브라스카의 옥수수 밭에 위치한 AmeriFlux의 NE1 사이트에서 2003년부터 2014년까지 관측된 플럭스 및 미기상 자료를 사용하여 복사, 에너지 및 엔트로피의 교환을 정량화하였다. 12년 평균한 생장기간의 결과에 따르면, 시스템의 에너지 포획(순복사와 하향단파복사의 비, Rn/Rs↓)은 옥수수의 생장과 함께 증가하였고, 생장기간이 비생장기간보다 약 80% 높았다. 생장기간 동안 시스템 내의 엔트로피 생성(σ)은 평균 9.56 MJ m-2 K-1이었고, 주로 하향단파 복사에 의해 결정되었다. 엔트로피 수송(J)은 잠열플럭스, 순장파복사, 현열플럭스의 순으로 기여하였고, 시스템 외부 환경으로 퍼낸 양은 σ의 ~84%에 해당하는 -7.99 MJ m-2 K-1이었다. 따라서 매년 생장 기간동안 시스템 내에 순 축적된 엔트로피(dS/dt)는 1.57 MJ m-2 K-1이었다. 탄소 흡수 효율(CUE)은 1.25~1.62, 물 사용 효율(WUE)은 1.98~2.92 g C (kg H2O)-1이었고 모두 옥수수의 성장과 함께 증가하였다. 극심한 가뭄으로 관개가 더 빈번하게 행해진 2012년의 경우, σ와 J가 모두 평년보다 10% 많은 최대값을 보였고, 그 결과 서로 대부분 상쇄되어 dS/dt는 평년보다 조금 높은 수준에 머물렀다. 가뭄 중에도 빈번한 관개로 인해 엔트로피 수송의 주된 경로가 현열플럭스에서 잠열플럭스로 바뀌면서 생산량과 CUE는 평년 값을 웃돌았으나 물과 빛의 사용 효율은 오히려 낮아졌다. 이러한 결과에 근거하여 관개된 옥수수 생태-사회시스템의 지속가능성의 변화를 평가하기에는 아직 여러가지 문제가 남아있다. 자기-조직화 과정은 시스템과 주변 간의 경도를 효과적으로 감소시키는 역할을 한다. 따라서 엔트로피 자료와 함께, 지속가능성의 척도가 되는 자기-조직화 역량을 나타내는 스펙트랄 엔트로피, 또는 하부시스템의 구조 및 에너지·물질의 흐름의 강도와 방향의 변화를 가늠할 수 있는 역학적 과정망(dynamic process network) 분석 등의 추가 연구가 병행되어야 한다.

3차원 전신 정위 방사선 치료 장치의 개발 (Development of the Whole Body 3-Dimensional Topographic Radiotherapy System)

  • 정원균;이병용;최은경;김종훈;안승도;이석;민철기;박참복;장혜숙
    • 한국의학물리학회지:의학물리
    • /
    • 제10권2호
    • /
    • pp.63-71
    • /
    • 1999
  • 입체조형 치료와 전신 방사선 수술에의 이용을 목적으로 3차원 전신 정위 방사선 치료 장치를 개발하였다. Couch 위에 놓을 수 있는 전신 정위 치료판을 제작하여 방사선 비투과성 카테타 선을 이용하여 치료판 위에 좌표계를 설치하고, MeV-Green(전성 물산, 한국)으로 고정틀을 만들어 환자 자세를 고정시키고, 플라스틱 봉과 봉 지지판을 이용하여 고정틀을 고정하였다. 이러한 설계, 제작으로 입체 조형 치료 등에서 갠트리 회전에 의한 기하학적 제약을 최소화하고 방사선 조사 투과율 이 특정한 방향에서 영향을 받는 문제점을 해소하였다. CT 영상을 통해 치료 표적의 위치를 파악하고 치료판 기준점에 대하여 좌표화하여 모의 치료시와 방사선 치료시의 환자 자세 변화 오차를 줄였다. 3대의 CCTV 카메라를 사용하여 환자 자세 변화를 감지, 수정함으로써 체표변의 외곽선으로 부터 setup 오차를 최소화 할 수 있었다. 치료 효용성을 높이기 위해 이러한 과정을 모니터를 보면서 실시간으로 처리 할 수 있도록 하였고, IDL(Interactive Data Language, RSI, U.S.A.)을 사용하여 image subtraction 방식으로 환자 자세 변화를 가시화하여 오차를 줄이도록 하였다. 내부 장기 움직임에 따른 표적의 움직임을 추적할 목적으로 rotating X-ray 장치를 제작하였다. Landmark 나사를 표적주위 뼈나 표적중심에 삽입하여 이 rotating X-ray 장치를 이용해서 anterior, lateral 두 방향에서 얻은 영상 정보로부터 marker 에 대한 표적의 위치 변화를 가시화 하여 내부 표적의 움직임에 따른 setup 오차를 줄였다. CT 모의치료를 할 수 있도록 IDL 을 이용하여 PC용 모의치료 프로그램을 GUI 환경에서 구현하였고 이 프로그램을 통해서 치료 계획을 위해 CT 에서 수집된 영상정 보를 이용하여 표적을 포함한 장기들의 그래픽 처리, 편집, 전송 등의 작업을 수행하도록 하였다.

  • PDF

합리성의 추구와 수학교육 (The Persuit of Rationality and the Mathematics Education)

  • 강완
    • 한국수학교육학회지시리즈A:수학교육
    • /
    • 제24권2호
    • /
    • pp.105-116
    • /
    • 1986
  • For any thought and knowledge, its growth and development has close relation with the society where it is developed and grow. As Feuerbach says, the birth of spirit needs an existence of two human beings, i. e. the social background, as well as the birth of body does. But, at the educational viewpoint, the spread and the growth of such a thought or knowledge that influence favorably the development of a society must be also considered. We would discuss the goal and the function of mathematics education in relation with the prosperity of a technological civilization. But, the goal and the function are not unrelated with the spiritual culture which is basis of the technological civilization. Most societies of today can be called open democratic societies or societies which are at least standing such. The concept of rationality in such societies is a methodological principle which completes the democratic society. At the same time, it is asserted as an educational value concept which explains comprehensively the standpoint and the attitude of one who is educated in such a society. Especially, we can considered the cultivation of a mathematical thinking or a logical thinking in the goal of mathematics education as a concept which is included in such an educational value concept. The use of the concept of rationality depends on various viewpoints and criterions. We can analyze the concept of rationality at two aspects, one is the aspect of human behavior and the other is that of human belief or knowledge. Generally speaking, the rationality in human behavior means a problem solving power or a reasoning power as an instrument, i. e. the human economical cast of mind. But, the conceptual condition like this cannot include value concept. On the other hand, the rationality in human knowledge is related with the problem of rationality in human belief. For any statement which represents a certain sort of knowledge, its universal validity cannot be assured. The statements of value judgment which represent the philosophical knowledge cannot but relate to the argument on the rationality in human belief, because their finality do not easily turn out to be true or false. The positive statements in science also relate to the argument on the rationality in human belief, because there are no necessary relations between the proposition which states the all-pervasive rule and the proposition which is induced from the results of observation. Especially, the logical statement in logic or mathematics resolves itself into a question of the rationality in human belief after all, because all the logical proposition have their logical propriety in a certain deductive system which must start from some axioms, and the selection and construction of an axiomatic system cannot but depend on the belief of a man himself. Thus, we can conclude that a question of the rationality in knowledge or belief is a question of the rationality both in the content of belief or knowledge and in the process where one holds his own belief. And the rationality of both the content and the process is namely an deal form of a human ability and attitude in one's rational behavior. Considering the advancement of mathematical knowledge, we can say that mathematics is a good example which reflects such a human rationality, i. e. the human ability and attitude. By this property of mathematics itself, mathematics is deeply rooted as a good. subject which as needed in moulding the ability and attitude of a rational person who contributes to the development of the open democratic society he belongs to. But, it is needed to analyze the practicing and pursuing the rationality especially in mathematics education. Mathematics teacher must aim the rationality of process where the mathematical belief is maintained. In fact, there is no problem in the rationality of content as long the mathematics teacher does not draw mathematical conclusions without bases. But, in the mathematical activities he presents in his class, mathematics teacher must be able to show hem together with what even his own belief on the efficiency and propriety of mathematical activites can be altered and advanced by a new thinking or new experiences.

  • PDF

데이터 마이닝 기법을 이용한 차량용 반도체의 불량률 예측 연구 (Prediction of field failure rate using data mining in the Automotive semiconductor)

  • 윤경식;정희운;박승범
    • 기술혁신연구
    • /
    • 제26권3호
    • /
    • pp.37-68
    • /
    • 2018
  • 본 논문에서는 차량용 반도체가 제품 출하 후 사용 환경에 따라 발생되는 불량률을 데이터 마이닝 기법을 이용하여 분석하였다. 20세기 이후 가장 보편적인 이동수단인 자동차는 전자 컨트롤 장치와 자동차용 반도체의 사용량이 급격히 증가하면서 매우 빠른 속도로 진화하고 있다. 자동차용 반도체는 차량용 전자 컨트롤 장치 중 핵심 부품으로 소비자들에게 안정성, 연료 사용의 효율성, 운전의 안정감을 제공하기 위해 사용되고 있다. 자동차용 반도체는 가솔린엔진, 디젤 엔진, 전기 모터를 컨트롤하는 기술, 헤드업 디스플레이, 차선 유지 시스템 등 많은 부분에 적용되고 있다. 이와 같이 반도체는 자동차를 구성하는 거의 모든 전자 컨트롤 장치에 적용되고 있으며 기계적인 장치를 단순히 조합한 이상의 효과를 만들어 내고 있다. 자동차용 반도체는 10년 이상의 자동차 사용 기간을 고려하여 높은 신뢰성, 내구성, 장기공급 등의 특성을 요구하고 있다. 자동차용 반도체의 신뢰성은 자동차의 안전성과 직접적으로 연결되기 때문이다. 반도체업계에서는 JEDEC과 AEC 등의 산업 표준 규격을 이용하여 자동차용 반도체의 신뢰성을 평가하고 있다. 또한 자동차 산업에서 표준으로 제시한 신뢰성 실험 방법과 그 결과를 이용하여 개발 초기 단계 및 제품 양산 초기단계에서 제품의 수명을 예측 하고 있다. 하지만 고객의 다양한 사용 조건 및 사용 시간 등 여러 변수들에 의해 발생되는 불량률을 예측하는 데는 한계가 있다. 이러한 한계점을 극복하기 위하여 학계와 산업계에서 많은 연구가 있어왔다. 그 중 데이터 마이닝 기법을 이용한 연구가 다수의 반도체 분야에서 진행되고 있지만, 아직 자동차용 반도체에 대한 적용 및 연구는 미비한 상태이다. 이러한 관점에서 본 연구는 데이터 마이닝 기법을 이용하여 반도체 조립(Assembly)과 패키지 테스트(Package test) 공정 중 발생 된 데이터들간의 연관성을 규명하고, 고객 불량 데이터를 이용하여 잠재 불량률 예측에 적합한 데이터 마이닝 기법을 검증하였다.

대역폭 적응형 분산 스트리밍 기법을 이용한 IPTV 서비스용 오버레이 멀티캐스트 네트워크 (Overlay Multicast Network for IPTV Service using Bandwidth Adaptive Distributed Streaming Scheme)

  • 박은용;유정;한선영;김진철;강상욱
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제16권12호
    • /
    • pp.1141-1153
    • /
    • 2010
  • 본 논문에서는 IPTV 표준화 기구인 ITU-T IPTV FG(Focus Group)에서 제안한 IPTV 참조 모델을 기반으로 라이브 IPTV 방송이 고객에게 전달되는 과정을 네트워크 관점에서 분석하여 각 네트워크 특성에 맞는 멀티캐스트 기법을 적용한 혼합형 오버레이 멀티캐스트 네트워크인 ONLIS(Overlay Multicast Network for Live IPTV Service)를 제안한다. IPTV 방송사 네트워크와 네트워크 서비스 제공자의 백본 네트워크에는 안정적인 스트립 분산과 효율적인 트래픽 관리를 위해 전용 서버 기반의 오버레이 멀티캐스트 네트워크를 적용하고, 종단 사용자가 네트워크에 접속하는 구간인 액세스 네트워크 구간은 P2P 방식 오버레이 네트워크를 구성하여 서버 부하 절감효과를 얻을 수 있다. P2P 기술을 이용하여 라이브 스트림을 전송할 때 해결해야 할 가장 중요한 과제는 전송 지연 단축과 전송 스트림 품질 향상이다. 이 문제를 해결하기 위해 본 논문에서는 P2P 관련 기술을 제시한다. 제안 기술은 서버 기반과 P2P 기반의 혼합형 오버레이 멀티캐스트 네트워크의 장점을 활용한 분산 스트리밍 P2P 트리(DSPT: Distributed Streaming P2P Tree)를 이용한 전송 기법이다. 제안하는 P2P 전송 방식은 전적으로 피어에 스트림 전송을 의존하지 않고 액세스 네트워크의 전용 오버레이 멀티캐스트 전송 장비인 릴레이(Relay)와 협조하는 방식으로, 피어에 장애가 발생하면 즉시 릴레이로부터 스트림 수신을 재개하여 끊김 없는 스트림 서비스를 받을 수 있다. 또한, 하나의 스트림을 여러 서버와 경로를 통해 전송할 수 있는 분산 스트리밍 기법을 적용하여 공급 피어의 전송 대역폭 허용하는 범위 내에서 스트림을 전송하고, 나머지는 로컬 액세스 네트워크의 오버레이 전송 장비로부터 수신하여 P2P 네트워크의 전송 효율성을 향상하였다.

절수의 시기 및 방법의 차이가 수도생육 수량과 기타 실용형태질 미치는 영향 (The Study on the Effects of the Economical Use of Irrigation Water by Different Irrgation Periods and Its Methods on the Growth, Yield and the Factors of Rice Plants.)

  • 이창구
    • 한국농공학회지
    • /
    • 제10권1호
    • /
    • pp.1388-1393
    • /
    • 1968
  • 본(本) 실험(實驗)은 관개방법(灌漑方法)을 합리화(合理化)시키고 관개수(灌漑水)를 절약(節約)하는 방법(方法)으로 절수(節水)의 정도(程度) 및 절수시기(節水時期)가 수도수량(水稻收量) 및 그 구성요소(構成要素)에 미치는 영향(影響)을 조사(調査)하였으며 그 시험결과(試驗結果)를 요약(要約)하면 다음과 같다. 1. 토양(土壤)의 이화학적(理化學的) 성질(性質)에 별차(別差)를 볼 수 없었으며 관개수질(灌漑水質) 기타(其他) 기온(氣溫) 강우(降雨) 등(等) 모든 값이 각처리구간(各處理區間) 동질(同質)이었다. 2. 벽간중(蘗稈重)은 절수정도(節水程度) 처리구간(處理區間)에만 유의성(有意性)을 보였으며 보통구(普通區)가 좋았다. 3. 밑다짐 효과는 토양(土壤)의 보수력(保水力)이 좋아 물이 절약(節約)되었으며 모든 생육(生育)은 물론(勿論) 수량(收量)에도 33.1%, 17.8%의 증수(增收)를 보였다. 더욱이 30cm의 경토(耕土) 밑에 6cm의 밑다짐을 하였던바 이것은 다수확(多收穫)에도 사질토양(砂質土壤)의 개량(改良)에도 좋은 방법(方法)이다. 4. 수량(收量)에 있어서 표(表) 10, 11에 나타난 바와 같이 밑다짐 절수구(節水區) 33.1%, 밑다짐 극절수구(極節水區) 17.8%, 밑다짐 보통구(普通區) 17.8%의 증수(增收)와 절수구(節水區) 17.2%, 극절수구(極節水區) 5.8%의 순서(順序)의 증수(增收)의 효과를 보였다. 5. 일주수수(一株穗數)와 일주입수(一株粒數)의 변이(變異)는 심(甚)하지 않았으나 절수(節水)의 정도(程度) 처리구(處理區)에서는 절수구(節水區), 극절수구(極節水區), 보통구(普通區)의 순서(順序)였으며 시기(時期)에 따른 효과는 초기(初期), 중기(中期), 후기(後期), 상시(常時)의 순서(順序)로 차이(差異)가 있어 수량(收量)에 미치는 효과의 차이(差異)가 있었다. 6. 적당(適當)히 절수(節水)를 하면 관개수량(灌漑水量)에 있어서 전량(全量)의 1/3이 절약(節約)되어 저수지(貯水池) 사용(使用)에 있어서는 동일저수량(同一貯水量)으로써 관개기간(灌漑期間)이 연장(延長)되어 어느 정도(程度)의 조발(早魃)에도 그 해(害)를 극복(克服)할 수 있고 양수(揚水機利用)에 있어서는 혼영비(渾營費)가 절약(節約)될 것이다. 수량(收量)에 있어서는 어느 것이나 10% 이상(以上)의 증수(增收)를 보이고 있다. 7. 만일(萬一) 답지대(沓地帶)가 삼투(渗透), 누수(漏水)가 (甚)심해서 보수력(保水力)이 판(板)히 낮으면 여기에다 점토(粘土)로써 밑다짐을 시행(施行)하면 그의 보수력(保水力)이 커지고 따라서 종래(從來)의 관개수량(灌漑水量)을 반감(半減)해도 족(足)할 것이며 (2 l/sec 이상(以上)을 1 l/sec로 함) 수량(收量)에 있어서 막대(莫大)한 증수(增收)를 얻게될 것이다.

  • PDF

농촌인구(農村人口)의 변화(變化)와 예측(豫測) (Variation and Forecast of Rural Population in Korea: 1960-1985)

  • 권용덕;최규섭
    • Current Research on Agriculture and Life Sciences
    • /
    • 제8권
    • /
    • pp.129-138
    • /
    • 1990
  • 이상에서 본 연구는 1960년 이후부터 1985년까지의 인구규모와 그 변동의 특질을 농촌에서 도시로의 인구이동현상과 관련하여 검토해 보았다. 아울러 분해시계열방법을 이용하여 농촌인구유출과 농정과의 관계도 고찰하였다. 그리고 적정모델을 추정하여 2,000년까지의 농촌 및 농가인구도 예측해 보았다. 결론적으로 말해서 인구구조의 변화측면에서 농촌인구와 농가인구는 1965년부터 감소하기 시작하여 1975년 이후부터 급격히 감소하였다. 농촌인구의 급격한 감소는 농촌 인구의 자연감소로 인한 요인보다는 도시로 유출되는 인구이동의 요인이 더 크게 작용한 것으로 나타났다. 농촌에서 도시로의 인구유출과정에서 유입지의 분포를 보면 도시지역 중에서 서울, 부산, 경기지역으로 인구가 집중한 것으로 나타났다. 특히 70년대에는 서울 부산 등 대도시 지역으로 직접적인 이동이 있었으나 80년대에 들어와서는 대도시 지역으로의 직접적인 유입보다는 주변지역으로의 유입이 점차 증가함으로써 농촌에서 대도시로의 유입형태가 주변도시로의 유입형태로 변화되고 있다. 농촌인구의 유출을 농업생산과 관련시켜 볼 때 농업노동력의 수요가 확대되는 6월 이후에 유출인구는 점차 줄어들고 있으며 3월에 가장 많이 유출하는 것으로 판명되었다. 60년대 이후 농업정책과 농촌인구의 유출과의 관계를 분석하기 위해 순환변동을 도출하였으며 2-3차 개발계획기간을 제외한 기간에 있어서 농촌부문의 상대적 저위성이 농촌인구의 유출을 자극한 요인으로 작용했으며 이러한 사실은 농업정책의 불균형적 시행이 직 간접적으로 영향을 미친 결과라 하겠다. 끝으로 농촌인구의 유출을 포함한 한국농업의 근본적인 문제는 도농간 상대적 소득 격차에 있다고 보고 농촌지역의 개발을 서울이나 수도권, 대도시권의 비대화를 막기 위한 방편 또는 공업화 우선정책의 반작용으로 본 과거의 정책성향을 극복해야 한다는 점이다. 따라서 도농간 소득격차의 문제를 농업정책의 중심과제로 삼고 농촌지역의 자원을 보다 효율적으로 이용함으로써 나라의 경제적 효율성은 물론 형평성을 높인다는 시각에서 농업정책을 다루어야 할 것이다.

  • PDF

글로벌 공급사슬에서 경쟁협력 스케줄링을 위한 에이전트 기반 플랫폼 구축 (Development of Agent-based Platform for Coordinated Scheduling in Global Supply Chain)

  • 이정승;최성우
    • 지능정보연구
    • /
    • 제17권4호
    • /
    • pp.213-226
    • /
    • 2011
  • 글로벌 공급사슬 환경에서 글로벌하게 분산 조달, 생산, 유통하게 됨에 따라 전체 공급사슬의 스케줄을 최적화하기 위해서 공급사슬상의 개별 기업 혹은 공장의 스케줄링 최적화뿐만 아니라 각 개별 기업 혹은 공장의 스케줄을 긴밀하게 연계하는 것이 필요하게 되었다. 이는 경쟁과 협력을 동시에 하는 개별 기업 혹은 공장을 개별 에이전트로 보고 각 에이전트간 커뮤니케이션을 통해 개별 에이전트가 관할하는 스케줄러의 스케줄을 조정함으로써 가능해진다. 하지만 전통적인 스케줄링 연구는 개별 스케줄러의 최적화에 집중되어 있고, 에이전트 연구는 스케줄링 도메인에 적용한 예가 제한적이며 이 예도 개별 스케줄러 내의 최적화에 적용하거나 실제 현장 문제가 아닌 실험실 문제 수준에 그치고 있다. 따라서 본 연구에서는 전체 글로벌 공급사슬 스케줄의 최적화를 위해 개별 기업 혹은 공장 스케줄러의 스케줄링을 연계하는 경쟁협력 스케줄링을 위한 에이전트 기반 플랫폼을 구축하였다. 글로벌 공급사슬에서 경쟁협력 스케줄링을 위한 에이전트 기반 플랫폼을 구축하기 위해 첫째, 경쟁협력 스케줄링 분류 체계를 확립하고, 둘째, 경쟁협력 스케줄링을 위한 에이전트를 설계하고, 셋째, 경쟁협력 스케줄링을 위한 지식기반 의사결정 모델을 개발한 후, 넷째 조선산업에 적용 가능한 프로토타입 시스템을 개발했다. 이를 통해 글로벌 공급사슬상의 전체 스케줄의 품질과 에이전트간 커뮤니케이션의 노력에 대한 균형점을 찾을 수 있다. 이를 통해 공급사슬내 개별 기업 혹은 공장의 부분 최적화를 극복할 수 있는 대안을 제시할 것으로 기대한다.

멀티미디어 프로그램을 활용한 성교육의 효과 - 초등학교 6학년을 중심으로 - (The Effect of Sex Education Using Multimedia Program - Focusing on Elementary School Sixth-Grade -)

  • 백운석;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제1권1호
    • /
    • pp.83-93
    • /
    • 2000
  • The purpose of this study were to suggest the method of sex education by designing and implementing multimedia program about sex education, to search the efficiency between a teaching using multimedia program and a teaching of traditional method. To put above aims into practice, these were required : 1. are there any differences in the alteration of sex attitude according to teaching methods. 2. are there any differences in the completion of sex knowledge according to teaching methods. 3. are there any differences in the alteration of sex attitude according to learning level and teaching methods. 4. are there any differences in the completion of sex knowledge according to learning level and teaching methods. 5. are there any differences in the alteration of sex attitude according to sex and teaching methods. 6. are there any differences in the completion of sex knowledge according to sex and teaching methods. To carry out a reseach for this purpose, the subjects for this study were 160 sixth grade students from 2 elementary schools in Pu-Chun, Kyung Ki. The tools for study were two kind of questionnaires: sex knowledge test, sex attitude test. Each test consists of 20 items. Collected data was analysed with t-test by means of SPSS program. The main results of this study are as follow: 1. The Alteration of sex attitude according to teaching methods. There was a significant difference among teaching methods(P<.001). a teaching using multimedia program was more efficient than a teaching of traditional method in the alteration of sex attitude. 2. The Completion of sex knowledge according to teaching methods. There was a significant difference among teaching methods(P<.001). a teaching using multimedia program was more efficient than a teaching of traditional method in the completion of sex knowledge. 3. The Alteration of sex attitude according to learning level and teaching methods. There was a significant difference among teaching methods in the superior class. a teaching using multimedia program was more efficient than a teaching of traditional method in the alteration of sex attitude(P<.001). However, there was not a significant difference among teaching methods in the inferior class(P>.05). 4. The Completion of sex knowledge according to learning level and teaching methods. There was a significant difference among teaching methods in the superior class. a teaching using multimedia program was more efficient than a teaching of traditional method in the completion of sex knowledge(P<.001). Also, there was a significant difference among teaching methods in the inferior class. a teaching using multimedia program was more efficient than a teaching of traditional method in the completion of sex knowledge(P<.001). 5. The Alteration of sex attitude according to sex and teaching methods. There was a significant difference among teaching methods in the man class. a teaching using multimedia program was more efficient than a teaching of traditional method in the alteration of sex attitude(P<.01). However, There was not a significant difference among teaching methods in the woman class(P>.05). 6. The Completion of sex knowledge according to sex and teaching methods. There was a significant difference among teaching methods in the man class. a teaching using multimedia program was more efficient than a teaching of traditional method in the completion of sex knowledge(P<.001). Also, there was a significant difference among teaching methods in the woman class. a teaching using multimedia program was more efficient than a teaching of traditional method in the completion of sex knowledge(P<.05).

  • PDF