• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.578-580
• /
• 2005

Energy distribution function for electrons in SF6-Ar mixtures gas used by MCS-BEq algorithm has been analysed over the E/N range 30~300[Td] by a two term Boltzmann equation and by a Monte Carlo Simulation using a set of electron cross sections determined by other authors, experimentally the electron swarm parameters for 0.2[%] and 0.5[%] $SF_6$-Ar mixtures were measured by TOF method, The results show that the deduced electron drift velocities, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients and mean energy agree reasonably well with theoretical for a rang of E/N values. The results obtained from Boltzmann equation method and Monte Carlo simulation have been compared with present and previously obtained data and respective set of electron collision cross sections of the molecules.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1211-1218
• /
• 2018

Within the framework of the modified factorization method, we solve the $Schr{\ddot{o}}dinger$ equation with the modified Yukawa potential. The energy spectrum is obtained using the Pekeris approximation scheme for the centrifugal term. The thermodynamic properties, including the vibrational partition function, vibrational mean energy, vibrational mean free energy, vibrational specific heat capacity and vibrational entropy, are calculated. As a special case, we compare our result with that work of Dong [Int. J. Quant. Chem. 107, 366 (2007)] and find good agreement.

• Nutrition Research and Practice
• /
• v.9 no.3
• /
• pp.278-287
• /
• 2015

BACKGROUND/OBJECTIVES: Diet plays an important role in growth and development of children. However, dietary intakes of children living in either rural or urban areas can be influenced by household income. This cross-sectional study examined energy, nutrient and food group intakes of 749 urban children (1-10 years old) by household income status. SUBJECTS/METHODS: Children's dietary intakes were obtained using food recall and record for two days. Diet adequacy was assessed based on recommended intakes of energy and nutrients and food group servings. RESULTS: For toddlers, all nutrients except dietary fiber (5.5 g) exceeded recommended intakes. Among older children (preschoolers and school children), calcium (548 mg, 435 mg) and dietary fiber (7.4 g, 9.4 g) did not meet recommendations while percentage of energy from total fat and saturated fats exceeded 30% and 10%, respectively. The mean sodium intakes of preschoolers (1,684 mg) and school children (2,000 mg) were relatively high. Toddlers in all income groups had similar energy and nutrient intakes and percentages meeting the recommended intakes. However, low income older children had lowest intakes of energy (P < 0.05) and most nutrients (P < 0.05) and highest proportions that did not meet recommended energy and nutrient intakes. For all food groups, except milk and dairy products, all age groups had mean intakes below the recommended servings. Compared to middle and high income groups, low income preschoolers had the lowest mean intake of fruits (0.07 serving), meat/poultry (0.78 serving) and milk/dairy products (1.14 serving) while low income toddlers and school children had the least mean intake of fruits (0.09 serving) and milk/dairy products (0.54 serving), respectively. CONCLUSION: Low socioeconomic status, as indicated by low household income, could limit access to adequate diets, particularly for older children. Parents and caregivers may need dietary guidance to ensure adequate quantity and quality of home food supply and foster healthy eating habits in children.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.5
• /
• pp.248-258
• /
• 2023

PURPOSE. This study aims to evaluate the effects of exposure energy on the lateral resolution and mechanical strength of dental zirconia manufactured using digital light processing (DLP). MATERIALS AND METHODS. A zirconia suspension and a custom top-down DLP printer were used for in-office manufacturing. The viscosity of the suspension and uniformity of the exposed light intensity were controlled. Based on the exposure energy dose delivered to each layer, the specimens were classified into three groups: low-energy (LE), medium-energy (ME), and high-energy (HE). For each energy group, a simplified molar cube was used to measure the widths of the outline (X_o and Y_o) and isthmus (X_i and Y_i), and a bar-shaped specimen of the sintered body was tested. A Kruskal-Wallis test for the lateral resolution and one-way analysis of variance for the mechanical strength were performed (α = .05). RESULTS. The zirconia green bodies of the ME group showed better lateral resolution than those of the LE and HE groups (both P < .001). Regarding the flexural strength of the sintered bodies, the ME group had the highest mean value, whereas the LE group had the lowest mean value (both P < .05). The ME group exhibited fewer agglomerates than the LE group, with no distinctive interlayer pores or surface defects. CONCLUSION. Based on these findings, the lateral resolution of the green body and flexural strength of the sintered body of dental zirconia could be affected by the exposure energy dose during DLP. The exposure energy should be optimized when fabricating DLP-based dental zirconia.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2013

Purpose: A selection of proper energy in treatment planning is very important because of having different dose distribution in body as photon energy. In generally, the low energy photon has been used in intensity-modulated radiation therapy (IMRT) for head and neck (H&N) cancer. The aim of this study was to evaluate the effect of partially used high energy photon at posterior oblique fields on IMRT plan for H&N cancer. Materials and Methods: The study was carried out on 10 patients (nasopharyngeal cancer 5, tonsilar cancer 5) treated with IMRT in Seoul National University Bundang Hospital. CT images were acquired 3 mm of thickness in the same condition and the treatment plan was performed by Eclipse (Ver.7.1, Varian, Palo Alto, USA). Two plans were generated under same planing objectives, dose volume constraints, and eight fields setting: (1) The low energy plan (LEP) created using 6 MV beam alone, (2) the partially used high energy plan (PHEP) created partially using 15 MV beam at two posterior oblique fields with deeper penetration depths, while 6 MV beam was used at the rest of fields. The plans for LEP and PHEP were compared in terms of coverage, conformity index (CI) and homogeneity index (HI) for planning target volume (PTV). For organs at risk (OARs), $D_{mean}$ and $D_{50%}$ were analyzed on both parotid glands and $D_{max}$, $D_{1%}$ for spinal cord were analyzed. Integral dose (ID) and total monitor unit (MU) were compared as addition parameters. For the comparing dose to normal tissue of posterior neck, the posterior-normal tissue volume (P-NTV) was set on the patients respectively. The $D_{mean}$, $V_{20Gy}$ and $V_{25Gy}$ for P-NTV were evaluated by using dose volume histogram (DVH). Results: The dose distributions were similar with regard to coverage, CI and HI for PTV between the LEP and PHEP. No evident difference was observed in the spinal cord. However, the $D_{mean}$, $D_{50%}$ for both parotid gland were slightly reduced by 0.6%, 0.7% in PHEP. The ID was reduced by 1.1% in PHEP, and total MU for PHEP was 1.8% lower than that for LEP. In the P-NTV, the $D_{mean}$, $V_{20Gy}$ and $V_{25Gy}$ of the PHEP were 1.6%, 1.8% and 2.9% lower than those of LEP. Conclusion: Dose to some OARs and a normal tissue, total monitor unit were reduced in IMRT plan with partially used high energy photon. Although these reduction are unclear how have a clinical benefit to patient, application of the partially used high energy photon could improve the overall plan quality of IMRT for head and neck cancer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.540-546
• /
• 2001

The purpose of this study was to investigate the relationship among nutritional status of copper and zinc, serum leptin, and lipids of 99 middle school girls residing in kyunggi-do, Korea. Subjects were divided assigned to one of two groups such as normal (BMI<85 percentile, n=58) and obese (85$\leq$BMI, n=41) groups. Subjects were evaluated based on anthropometric measurements, 24-hr dietary recalls and blood analysis. The mean age was 13.93 years. The mean weight (p<0.001), BMI (p<0.001), body fat (p<0.001) of obese were significantly higher then those of normal group. The mean daily energy intake was 94.2% of RDA for Korean. The ratio of energy coming from carbohydrate, fat and protein was 63:24:13. The mean daily intakes of Cu and Zn were 1.4 mg and 7.4 mg (73.7% of RDA), and there were no significant difference between two groups. The mean serum levels of leptin (p<0.001), LDL-cholesterol (p<0.05), triglyceride (p<0.01), TPH (total cholesterol/HDL; p<0.001), LPH (LDL/HDL; p<0.001) and AI (atherogenic index; p<0.001) of obese were significantly higher than those of normal group. The mean serum Cu level of obese was significantly higher than normal group but, the mean serum Zn level of obese was significantly lower than normal group. Serum Cu showed a significantly positive correlations with body weight (p<0.001), BMI (p<0.001), body fat (p<0.001), serum leptin, and LPH. However, serum Zn showed a significantly negative correlations with body weight (p<0.001), BMI (p<0.001), serum leptin (p<0.001), TPH (p<0.05), and AI (Atherogenic index; p<0.05). To summarize the results, the Zn intakes of middle school girls did not reach to RDA for Koreans. Also, increase of BMI may lead to decrease of serum zinc level and increase of serum copper level, and this change of serum zinc related to the change of serum leptin and serum lipids level in middle school girls during rapid growth.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.310-311
• /
• 2011

Dual-frequency (DF) capacitively coupled plasmas (CCP) are used to separately control the mean ion energy and flux at the electrodes [1]. This separate control in capacitively coupled radio frequency discharges is one of the most important issues for various applications of plasma processing. For instance, in the Plasma Enhanced Chemical Vapor Deposition processes such as used for solar cell manufacturing, this separate control is most relevant. It principally allows to increase the ion flux for high deposition rates, while the mean ion energy is kept constant at low values to prevent highly energetic ion bombardment of the substrate to avoid unwanted damage of the surface structure. DF CCP can be analyzed in a fashion similar to single-frequency (SF) driven with effective parameters [2]. It means that DF CCP can be converted into SF CCP with effective parameters such as effective frequency and effective current density. In this study, comparison of DF CCP and its converted effective SF CCP is carried out through particle-in-cell/Monte Carlo (PIC-MCC) simulations. The PIC-MCC simulation shows that DF CCP and its converted effective SF CCP have almost the same plasma characteristics. In DF CCP, the negative resistance arises from the competition of the effective current and the effective frequency [2]. As the high-frequency current increases, the square of the effective frequency increases more than the effective current does. As a result, the effective voltage decreases with the effective current and it leads to an increase of the ion flux and a decrease of the mean ion energy. Because of that, the negative resistance regime can be called the preferable regime for solar cell manufacturing. In this preferable regime, comparison of DF (13.56+100 or 200 MHz) CCP and SF (60 MHz) CCP with the same effective current density is carried out. At the lower effective current density (or at the lower plasma density), the mean ion energy of SF CCP is lower than that of DF CCP. At the higher effective current density (or at the higher plasma density), however, the mean ion energy is lower than that of SF CCP. In this case, using DF CCP is better than SF CCP for solar cell manufacturing processes.

• Solar Energy
• /
• v.8 no.2
• /
• pp.46-56
• /
• 1988

This investigation concerns thermal stratification of the water due to the temperature difference (${\Delta}T=T_{\infty}-T_i$) between the mean temperature of the water in the test tank (1m wide, 1m high, 2.1m long) and the temperature of the inflow water into the tank; flow rate of circulating water and height of the sink diffuser in the test tank. The additional objectives was to observe a stratification phenomena near an interface by measuring the velosities and the temperature difference and investigate an availabilities of the better effective hot water through establishing thermocline near an interface around the bottom of the tank. Following results were obtained through the experiments. 1. When the flow rate was constant and the temperature difference (${\Delta}T=T_{\infty}-T_i$) between the mean temperature of the flow in the test tank and the temperature of the inflow water increased by 5.6, 9.5, 13.5($^{\circ}C$), obtained the better effective advantage of hot water and the stress near an interface increased gradually. 2. When the ${\Delta}T=T_{\infty}-T_i$ was constant and flow rate increased by 4.0, 4.8, 6.4, 8.0 (LPM), obtained the better effective advent age of hot water and the mean stress near an interface increased gradually. 3. When the height of the sink diffuser was 25cm from tank bottom in comparison with 50cm, obtained the better effective advantage of hot water and the mean stress near an interface increased.

• The Korean Journal of Applied Statistics
• /
• v.31 no.6
• /
• pp.785-799
• /
• 2018

With the development of renewable energy sector, the importance of solar energy is continuously increasing. Solar radiation forecasting is essential to accurately solar power generation forecasting. In this paper, we used time series models (ARIMA, ARIMAX, seasonal ARIMA, seasonal ARIMAX, ARIMA GARCH, ARIMAX-GARCH, seasonal ARIMA-GARCH, seasonal ARIMAX-GARCH). We compared the performance of the models using mean absolute error and root mean square error. According to the performance of the models without exogenous variables, the Seasonal ARIMA-GARCH model showed better performance model considering the problem of heteroscedasticity. However, when the exogenous variables were considered, the ARIMAX model showed the best forecasting accuracy.

• Ocean Systems Engineering
• /
• v.13 no.1
• /
• pp.21-41
• /
• 2023

Decarbonization and energy transition can be considered as a main concern even for the oil industry. One of the initiatives to reduce emissions under studies considers the use of renewable energy as a complimentary supply of electric energy of the production platforms. Wind energy has a higher TRL (Technology Readiness Level) than other types of energy converters and has been considered in these studies. However, other types of renewable energy have potential to be used and hybrid concepts considering wind platforms can help to push the technological development of other types of energy converters and improve their efficiency. In this article, a preliminary hydrodynamic assessment of a new concept of hybrid wind and wave energy conversion platform was performed, in order to evaluate the potential of wave power extraction. A multiple OWCs (Oscillating Water Column) WEC (Wave Energy Converter) design was adopted for the analysis and some simplifications were adopted to permit using a frequency domain approach to evaluate the mean wave power estimation for the location. Other strategies were used in the OWC design to create resonance in the sea energy range to try to maximize the potential power to be extracted, with good results.