Acknowledgement
This study was supported by the Creative-Pioneering Researchers Program through Seoul National University (SNU).
References
- Alves MFRP, de Campos LQB, Simba BG, da Silva CRM, Strecker K, dos Santos C. Microstructural characteristics of 3Y-TZP ceramics and their effects on the flexural strength. Ceramics 2022;5:798-813. https://doi.org/10.3390/ceramics5040058
- Ayode Otitoju T, Ugochukwu Okoye P, Chen G, Li Y, Onyeka Okoye M, Li S. Advanced ceramic components: Materials, fabrication, and applications. J Ind Eng Chem 2020;85:34-65. https://doi.org/10.1016/j.jiec.2020.02.002
- Chen F, Wu JM, Wu HQ, Chen Y, Li CH, Shi YS. Microstructure and mechanical properties of 3Y-TZP dental ceramics fabricated by selective laser sintering combined with cold isostatic pressing. Int J Lightweight Mater Manuf 2018;1:239-45. https://doi.org/10.1016/j.ijlmm.2018.09.002
- Methani MM, Revilla-Leon M, Zandinejad A. The potential of additive manufacturing technologies and their processing parameters for the fabrication of all-ceramic crowns: A review. J Esthet Restor Dent 2020;32:182-92. https://doi.org/10.1111/jerd.12535
- Cho JH, Yoon HI, Oh JH, Kim DH. Effect of maximum support attachment angle on intaglio surface trueness of anatomic contour monolithic prostheses manufactured by digital light processing and zirconia suspension. J Prosthet Dent 2023;129:478-85. https://doi.org/10.1016/j.prosdent.2022.12.003
- Meng J, Lian Q, Xi S, Yi Y, Lu Y, Wu G. Crown fit and dimensional accuracy of zirconia fixed crowns based on the digital light processing technology. Ceram Int 2022;48:17852-63. https://doi.org/10.1016/j.ceramint.2022.03.057
- Branco AC, Colaco R, Figueiredo-Pina CG, Serro AP. Recent advances on 3D-printed zirconia-based dental materials: a review. Materials (Basel) 2023;16:1860.
- Kim YK, Yoon HI, Kim DJ, Han JS. Comparative analysis on intaglio surface trueness, wear volume loss of antagonist, and fracture resistance of full-contour monolithic zirconia crown for single-visit dentistry under simulated mastication. J Adv Prosthodont 2022;14:173-81. https://doi.org/10.4047/jap.2022.14.3.173
- Li R, Xu T, Wang Y, Sun Y. Accuracy of zirconia crowns manufactured by stereolithography with an occlusal full-supporting structure: An in vitro study. J Prosthet Dent 2022;S0022-3913(22)00064-6.
- Mitteramskogler G, Gmeiner R, Felzmann R, Gruber S, Hofstetter C, Stampfl J, Ebert J, Wachter W, Laubersheimer J. Light curing strategies for lithography-based additive manufacturing of customized ceramics. Addit Manuf 2014;1-4:110-8. https://doi.org/10.1016/j.addma.2014.08.003
- Chaudhary R, Fabbri P, Leoni E, Mazzanti F, Akbari R, Antonini C. Additive manufacturing by digital light processing: a review. Prog Addit Manuf 2023;8:331-51.
- Wu X, Teng J, Ji X, Xu C, Ma D, Sui S, Zhang Z. Research progress of the defects and innovations of ceramic vat photopolymerization. Addit Manuf 2023;65:103441.
- Gentry SP, Halloran JW. Light scattering in absorbing ceramic suspensions: Effect on the width and depth of photopolymerized features. J European Ceram Soc 2015;35:1895-904. https://doi.org/10.1016/j.jeurceramsoc.2014.12.006
- Sun J, Binner J, Bai J. 3D printing of zirconia via digital light processing: optimization of slurry and debinding process. J European Ceram Soc 2020;40:5837-44. https://doi.org/10.1016/j.jeurceramsoc.2020.05.079
- Sun Y, Li M, Jiang Y, Xing B, Shen M, Cao C, Wang C, Zhao Z. High-quality translucent alumina ceramic through digital light processing stereolithography method. Adv Eng Mater 2021;23:2001475.
- Yun Y, Deqiao X, Chen J, Zhaoling D, Lida S, Zongjun T, Yunfei C, Feng H. Mechanism of ceramic slurry light scattering affecting contour accuracy and method of projection plane correction. Ceram Int 2023;49:15024-33. https://doi.org/10.1016/j.ceramint.2023.01.085
- Zhang X, Wu X, Shi J. Additive manufacturing of zirconia ceramics: a state-of-the-art review. J Mater Res Technol 2020;9:9029-48. https://doi.org/10.1016/j.jmrt.2020.05.131
- Schweiger J, Bomze D, Schwentenwein M. 3D printing of zirconia-what is the future? Curr Oral Health Rep 2019;6:339-43. https://doi.org/10.1007/s40496-019-00243-4
- Patil A, D DJ, Bomze D, Gopal V. Wear behaviour of lithography ceramic manufactured dental zirconia. BMC Oral Health 2023;23:276.
- Xiang D, Xu Y, Bai W, Lin H. Dental zirconia fabricated by stereolithography: accuracy, translucency and mechanical properties in different build orientations. Ceram Int 2021;47:28837-47. https://doi.org/10.1016/j.ceramint.2021.07.044
- Zandinejad A, Das O, Barmak AB, Kuttolamadom M, Revilla-Leon M. The flexural strength and flexural modulus of stereolithography additively manufactured zirconia with different porosities. J Prosthodont 2022;31:434-40. https://doi.org/10.1111/jopr.13430
- Bove A, Calignano F, Galati M, Iuliano L. Photopolymerization of ceramic resins by stereolithography process: a review. Appl Sci 2022;12:3591.
- Conti L, Bienenstein D, Borlaf M, Graule T. Effects of the layer height and exposure energy on the lateral resolution of zirconia parts printed by lithography-based additive manufacturing. Materials (Basel) 2020;13:1317.