• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.25-44
• /
• 1974

In the present paper I described the results of the observations made on the visual characteristics such as the annual ring width and summerwood percentage of Pinus koraiensis Sieb. et Zucc. grown at out university forest. The results of the study are as follows: Characteristics of annual ring width and summerwood percentage 1. The range of dispersion of annual ring width and summerwood percentage are respectively 0.5-6.5mm and 5-50% on the normal wood and its arithmetic mean values are each 3.0mm and 24% on all sample trees. 2. The values of annual ring width of heart wood are larger than that of sapwood but on the contrary the values of summerwood percentage of heartwood are smaller than that of sapwood. On the other hand variations of these values are distingushed on the heartwood. 3. The values of annual ring width due to the parts of stem with crown. with clear length and at bottom showed that the largest values are given at the parts of stem with crown. But on the contrary the summerwood percentage values are largest at the parts of stem at bottom on all sample trees. 4. The values of annual ring width and summerwood percentage depending on the stand sides are not obvious. Horizontal and vertical variations of annual ring width and summerwood percentage 5. It was recognized that horizontal (radial direction) variations of annual ring width and summerwood percentage indicated two different patterns (the region of large fluctuation and that of small fluctuation) in a tree stem. These boundaries are seemed to appear at the parts of 12-15 annual rings from pith. 6. According to the increase of height in tree the values of annual ring width increase but the values of summerwood percentage gradually decrease. 7. But vertical variations of annual ring width and summerwood percentage on the sapwood are divided into two different parts (region of increased or decreased upwards and that of remained constant in successive height) in a tree stem and these limits are seemed to appear at the 7m of height in trees. Relations between annual ring width and summerwood percentage 8. The modes of summerwood percentage related with annual ring width are seemed to appear almost in the definite range (10-25%). 9. The relations between annual ring width and summerwood percentage show a highly negatine correlation on all sample trees.

• Journal of Forest and Environmental Science
• /
• v.9 no.1
• /
• pp.10-18
• /
• 1993

The study was carried out to investigate the physical (Density, Percentage of latewood, Percentage of pore zone, Mean annual ring width) and mechanical (Compressive strength parallel to the grain, Compression perpendicular to the grain, Shearing strength) properties of some major northern softwoods and hardwoods. The physical and mechanical properties of each species are summerized as Table 2 and the relationship between physical and mechanical factors are discussed. The results of this study were as follows: Density and percentage of latewood are closely related to physical and mechanical properties, but percentage of pore zone and mean annual ring width are remotely related to physical and mechanical properties.

• Journal of Korean Society of Forest Science
• /
• v.84 no.1
• /
• pp.71-76
• /
• 1995

This study on Pinus desiflora in Kangwon Province has been performed for the purpose of classifying its growth area by geographical factors. To classify its growth area, the basic data which had were the measured values for annual ring width from cores were used. Individual variations in the measured values were removed through the standardization. Regional mean chronologies were estimated from the standardized values. The growth area was classified by the cluster analysis on the basis of the regional mean standardized indices. The results of this study shown that annual growth patterns to be clustered similar to geographical distribution in Kangwon Province. And the regional variations of annual growth patterns in the western part of Kangwon province were greater than those in the eastern part of Kangwon province.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.3
• /
• pp.36-45
• /
• 2010

To analyze the relationship between climatic factors (monthly mean temperature and total precipitation) and tree-ring growths of Quercus mongolica Fischer (Mongolian oak) with different topographic sites in Mt. Worak, more than 10 trees were selected from each of seven stands. Two cores from each tree were measured for ring width. After crossdating, each ring-width series was double standardized by fitting first a negative exponential or straight regression line and secondly a 60-year cubic spline. Seven stands were categorized in two groups using cluster analysis for tree-ring index patterns. Cluster I (four stands) was located in higher elevation (550-812 m) with aspects of east, west and northwest, and cluster II (three stands) was located in rather lower election (330-628 m) with aspects of north and northwest. The aspects of two clusters were not significantly different. Response-function analysis showed a significant positive response to March precipitation for both clusters. It indicates that moisture supply during early spring season is important to radial growth because the cambial growths of ring-porous species, such as Mongolian oak, start before leaf growth. Cluster II showed a positive response to the precipitation of middle and late growing season, too.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.242-250
• /
• 2022

Here we aimed to date the year and season of the resin collection from Korean red pines at Worak mountain and investigate the natural healing ability of the wounds using the tree-ring analysis technique. We determined the dating of the resin collection based on the synchronization between the ring-width time series from the wound surface of the experimental trees and the local master chronology, which is the mean time series from the sound surface on the opposite side of the wounds. For the dating of resin collection, we selected thirteen Korean red pines with resin wounds. For the investigation on the annual healing ability of the wounds, we sampled three dead trees out of 13 trees as disks. Through the comparison of the individual ring-width time series from the wounds with the local master chronology, it was verified that the resin collection was undertaken between the spring of 1962 and the autumn of 1975. The mean healing length of the wounds was 15.8 cm over the preceding 42 years, making their annual mean healing 0.38 cm. Through our study we successfully verified the healing ability of the wounded Korean red pines for the resin collection as well as the undocumented resin collection history.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.65-78
• /
• 1990

For the purpose of Improving the sounding boards for the conventional GAYAKUM, I was making approximately 202 specimens of radial board, 371 specimens of tangential board by cutting along the grain and the part of stem and 31 specimens of the disjointed traditional GAYAKUM made in Paulownia coreana. And it was conducted to measure specific gravity, dynamic Young's modulus, internal friction, resonant frequency, velosity of sound and width of annual ring by the method of the frexural vibration in a free-free bar in the audio frequency range. And it confirmed the juvenile wood by measuring wood fiber length of specimens. It was also conducted to investigate dynamic properties and moisture absorption by various heat-treatment and to test dynamic Young's modulus and internal friction for the disjointed conventional GAYAKUM. The results obtained were summarized as follow: 1. The Juvenile wood is located within about 7 annual rings from the pith in Paulownia coreana. 2. As increased with the specific gravity, the dynamic Young's modulus had more and more increased, but the internal friction had slightly decreased. 3. I think that radial board would be good for sounding board wood. because radial board is higher than tangential board in dynamic Young's mudulus and internal friction is lower than tangential board. 4. The value of mean dynamic Young's modulus on the conventional GAYAKUM, radial board and tangential board of 604 samples is $0.4283\pm0.037(\times10^{11}dyne/cm^2)$, $0.4316\pm(\times10^{11}dyne/cm^2)$ and $0.4234\pm0.112(\times10^{11}dyne/cm^2)$ respectively. The value of the radial board showed little higher than that of conventional GAYAKUM, but It had a similar tendency between conventional GAYAKUM and tangential board. 5. The annual ring width by four aspect is more narrow in north and west than that of others. 6. The values of specific gravity and dynamic Young's modulus in the mature wood showed higher than those of juvenile wood. 7. As the grain angle in the butt wood more increased to bark from pith, the dynamic Young's modulus were low. Then it was not good for sounding board. 8. It appeared that the heat-treatment for sounding board wood had a more effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature. 9. As increased with the temperature, the rate of moisture absorption of heat-treatment wood had decreased. In conclusion, I thought that the sounding board wood for GAYAKUM would had the most effect to do the treatment of hotiron on surface after heat-treatment during 24 hours in $60^{\circ}C$ temperature using the radial board of mature wood.

• Journal of Korean Society of Forest Science
• /
• v.14 no.1
• /
• pp.33-38
• /
• 1972

This study was carried out to investigate on the variation of wood fiber dimensions of some oakwoods. Every 2 annual ring was selected for specimens from pith toward bark up to 28th annual ring on 3 species of Oak SINGALNAMOO(Quercus mongorica Fisch.), JOLCHAMNAMOO(Quercus serrata Thunb.) and KULCHAMNAMOO(Quercus variabilis Blume) which grew in Mt. Jiri. The investgated results are as follows: 1. Values of wood fiber lengths increase rapidly up to 16th annual ring, however, considerably stable at the rear part. Range of wood fiber length variations: Species Range of length(mean) CV SINGALNAMOO, $640{\sim}1,544{\mu}$($1,142.3{\mu}$), 8~16% JOLCHAMNAMOO, $592{\sim}1,600{\mu}$($1,179.6{\mu}$), 6~21% KULCHAMNAMOO, $679{\sim}1,592{\mu}$($1,298.9{\mu}$), 2~15% 2. The increment of wood fiber width and thickness by annual rings shows quite inactive contrary to the length. Range of wood fiber width: $7.6{\sim}10.0{\mu}$(mean $9.3{\mu}$) Range of wood fiber thickness: $2.0{\sim}3.2{\mu}$(mean $2.6{\mu}$) 3. There was no significance between species through their wood fiber lengths. 4. And these wood fibers believed to be valuable for pulp-wood through their fiber bonding ratio, Runkel ratio and flexibility coefficient.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.331-337
• /
• 2001

This study was performed to develope stem analysis program(Stemwin1.0) which can be used in PC with MS-Windows operating system. Stemwin1.0 uses width of annual tree ring measured with 1/100mm unit, and calculate increments of several growth factors such as DBH, height and volume with various methods. Mean DBH can be calculated by arithmetic and quadratic mean methods. Height can be estimated by parallel line, line extending and height curve methods. Volume can be estimated by Huber, Smalian, and Spline functions. Not only Total growth, Mean Annual Increment(MAI) and Current Annual Increment(CAI) of growth factors, but also merchantable volume and height, form factor, growth rate, and merchantable volume rate are automatically calculated. Stemwin1.0 can also output accurate stem taper curve with various scale, and prepare stem taper data(diameter at different disk heights) for statistical analysis for deriving stem taper model. Stemwin1.0 can export output data and graph to Excel for more compatible use of it.

• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.16-22
• /
• 1999

Species of 741 charcoal samples, which were excavated from the dwelling sites of the bronze age $(about\;2500\~3100\;B.P)$ at Hyeonwha-ri, Pyungteak, Korea, were identified. Most of samples were deciduous oaks (Quercus spp.; $97.7\%$) and others were alders (Ainus spp.; $1.9\%$) and soft pines (Pinus spp.; $0.4\%$). Tree rings of nine largest samples were also examined. The numbers of annual rings were 8 to 36 and mean ring width was rather narrow $(0.65\~1.82\;mm)$. Most samples possessed pith and tylosis. The results indicate that logs 10 to IS cm diameter had been used for the poles of houses without further processing.

• Journal of Forest and Environmental Science
• /
• v.8 no.1
• /
• pp.21-33
• /
• 1992

This study was performed to investigate the hardness of wood related to the wood surface, sap and heartwood, early and latewood, specific gravity, annual ring width and moisture content on major Korean tree species such as Pinus koraiensis, Abies holophylla, Larix leptolepis and Quercus valiabilis. The results were summarized as follows: 1. The arithmetic mean values of wood hardness on cross section were respectively $8.0kg/mm^2$ on Quercus valiabilis, $7.4kg/mm^2$ on Larix leptolepis, $5.1kg/mm^2$ on Pinus koraiensis and $4.7kg/mm^2$ on Abies hollophylla. 2. Generally hardness of wood on cross section was greater than the others and the proportion of cross section hardness to radial was respectively 2.8 on Quercus valiabilis, 2.6 on Larix leptolepis, 3.8 on Pinus koraiensis, and 4.1 on Abies holophylla and that proportion was tend to be decrease as specific gravity increased. 3. It was recognized that the hardness of sap and heartwood was different from each of the tree species and generally heartwood hardness was somewhat greater than sapwood. 4. Generally latewood hardness with in a ring was greater than earlywood and the proportion of earlywood hardness to latewood decreased as specific gravity increased. 5. The relations between hardness of wood and specific gravity show a high positive correlation on all sample tree species. 6. The values of hardness decreased with increasing annual ring width. 7. Hardness of wood on Abies holophylla was greatest in oven dried wood and it was decreased as moisture content increased, but not changed with moisture content abve F.S.P.. The proportion of oven dried wood hardness to green are respectively 3.0 on cross, 2.4 on radial and 1.9 on tangential section.