• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.61-68
• /
• 2013

PURPOSES : The purpose of this study is to study the noise reducing effect of Micro Surfacing by comparing general asphalt, longitudinal tining and Slurry Seal. METHODS : This study measures vehicles' noise of each section by the NCPX method that can measure noise between the road surface and the tire at the field. Total sound pressure and sound pressure level by the 1/3 octave band frequency are calculated through the field data of each section. Total sound pressure level is compared by ANOVA test statistically. After ANOVA test, post-hoc test is conducted to know mean difference of surface type by Tukey. RESULTS : As the result of CPB analysis to confirm sound pressure levels by frequency, it was shown that sound pressure levels by frequency are totally similar except for those of frequency bands between 100Hz and 500Hz. The result of ANOVA test and post-hoc test, it was shown that sections of surface type have a difference. The result of Micro Surfacing was lower 2~5dB(A) than other surface type. CONCLUSIONS : It is found that the noise reduction performance of Micro Surfacing was better than other surface type.

• Journal of Korean Living Environment System
• /
• v.24 no.4
• /
• pp.533-540
• /
• 2017

This study analyzes the stretchability and clothing pressure of fabrics made from stretchy knit materials, and uses the baseline data to develop various functional clothing made from stretchy knit fabrics. To observe the changes in the stretchability and clothing pressure, we observed the compatibility of the two materials (tricot and power-net), presence of flat seam, fabric layering, and flat seam direction as key variables. A standard test method for stretch properties (ASTM D2594) was used for measuring the stretchability of the material. Clothing pressure measurements were analyzed in terms of the mean and standard deviation values, and the correlation of the stretchability. In the case of tricot, the presence of flat seam increased the stretchability of the fabric regardless of the fabric layering. However, when tricot and the less stretchable power-net were combined, the presence of flat seam did not increase the stretchability. Flat seam did not interfere with or limit the stretchability of the fabric, but they did increase the clothing pressure at the seam. The stretchability had a negative correlation with the clothing pressure except along the flat seam.

• Archives of Craniofacial Surgery
• /
• v.22 no.3
• /
• pp.135-140
• /
• 2021

Background: Wide surgical excision is the gold standard for basal cell carcinoma (BCC) treatment. Typically, resection requires a safety margin ≥ 4 mm. We aimed to confirm BCC excisions' cancer recurrence rate and safety on the facial region with new safety margins. Methods: We included patients with primary BCC on the facial region who underwent wide excision with 2- or 3-mm safety margins at our institution between January 2010 and December 2018. Medical records were reviewed to confirm the epidemiology and surgical information. Recurrence was confirmed by physical examination through regular 6-month follow-up. Results: We included 184 out of 233 patients in this study after applying the exclusion criteria. The mean age and follow-up period were 71.2±10.2 years and 29.3±13.5 months, respectively. The predominantly affected area was the nose (95 cases); a V-Y advancement flap was the most commonly used surgical method. There were two cases of recurrence in the 2 mm margin group and one recurrence in the group resected with 3 mm margins. Conclusion: In this large cohort study, we found 2-3 mm excision margins can yield enough safety in facial BCCs. The recurrence rates were found to be comparable with those reported after wider margins.

• Wind and Structures
• /
• v.36 no.4
• /
• pp.249-261
• /
• 2023

Aerodynamic force coefficients are generally prescribed by an ensemble average of ten and/or twenty 10-minute samples. However, this makes it difficult to identify the exact probability distribution and exceedance probability of the prescribed values. In this study, 12,600 10-minute samples on three tall buildings were measured, and the probability distributions were first identified and the aerodynamic force coefficients corresponding to the specific non-exceedance probabilities (cumulative probabilities) of wind load were then evaluated. It was found that the probability distributions of the mean and fluctuating aerodynamic force coefficients followed a normal distribution. The ratios of aerodynamic force coefficients corresponding to the specific non-exceedance probabilities (C_f,Non) to the ensemble average of 12,600 samples (C_f,Ens), which was defined as an adjusting factor (C_f,Non/C_f,Ens), were less than 2%. The effect of coefficient of variation of wind speed on the adjusting factor is larger than that of the annual non-exceedance probability of wind load. The non-exceedance probabilities of the aerodynamic force coefficient is between P_C,nonex = 50% and 60% regardless of force components and aspect ratios. The adjusting factors from the Gumbel distribution were larger than those from the normal distribution.

• Korean Journal of Materials Research
• /
• v.32 no.2
• /
• pp.80-84
• /
• 2022

Copper nanoparticles (CuNPs) are considered of great importance due to their high catalytic and antimicrobial activities. This study focuses on the preparation and characterization of CuNPs, and on their antibacterial/antifungal activities. A copper salt (copper sulfate pentahydrate) as precursor, starch as stabilizing agent, and ascorbic acid as reducing agent were used to fabricate CuNPs. The resulting product was characterized via different techniques such as X-ray diffractrometry (XRD), Fourier Transform Infrared (FTIR) spectroscopy, and Scanning electron microscopy (SEM) to confirm its characteristic properties. Employing the Scherrer formula, the mean crystallite sizes of copper (Cu) and cuprous oxide (Cu₂O) nanocrystals were found to be 29.21 and 25.33 nm, respectively, as measured from the main X-ray diffraction peaks. The functional groups present in the resulting CuNPs were confirmed by FTIR. In addition, the engineered CuNPs showed antibacterial and antifungal activity against tested pathogenic bacterial and fungal strains.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.3
• /
• pp.15-28
• /
• 2024

Wind forecast is one of the key meteorological factors required for safe aircraft takeoff and landing. In this study, we developed an artificial intelligence-based wind compensation method by learning the Korea Air Force Weather Research and Forecast (KAF-WRF) forecast data and the Airfield Meteorological Observation System (AMOS) data at five airports using Support Vector Machine (SVM). The SVM wind prediction models were composed of three types according to the learning period (30 days, 40 days, and 60 days) using seven KAF-WRF variables as training data, and the wind prediction performance at the five airports was evaluated using Root Mean Squared Errors (RMSE). According to the results, the SVM wind prediction model trained using U (east-west) and V (north-south) components performed approximately 18% better than the model trained using wind speed and wind direction. The wind correction of KAF-WRF with AMOS observations via SVM outperformed the conventional KAF-WRF wind predictions in eight out of ten cases, capturing abrupt changes in wind direction and speed with a 25% reduction in RMSE.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.89-94
• /
• 2015

Objectives: The objective of this study was to determine characteristics of workers' exposures to airborne total and hexavalent chromium by job title in electroplating processes. Methods: Total Cr was determined through a modified method based on NIOSH Method 7024. Airborne hexavalent Cr, Cr(VI), was sampled and extracted according to NIOSH Method 7600 and analyzed at 520 nm using an ion chromatograph/visible detector. Results: The geometric mean(GM) of total Cr concentrations from all factories was $11.2{\mu}g/m^3$(GSD=4.9). The GM of Cr(VI) concentrations from all factories was $2.84{\mu}g/m$ (GSD=5.2), and the concentrations among factories were significantly different (p<0.05). The Cr(VI) levels were lower than total Cr levels. Total Cr exposure levels were highest among buffing workers ($21.6{\mu}g/m^3$), but Cr(VI) levels were highest among plating workers($4.15{\mu}g/m^3$). The concentrations of Cr(VI) and total Cr from plating tasks was highly correlated(r=0.91). Conclusions: In the electroplating industry, plating workers were mainly exposed to Cr(VI), but others were not. Oxidation-reduction states of Cr and job titles should be considered in the exposure or risk assessments of chrome electroplating factories.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.5
• /
• pp.97-109
• /
• 2003

This study is mainly conducted to derive the design drought rainfall by the consecutive duration using probability weighted moments with rainfall in the regional drought frequency analysis. It is anticipated to suggest optimal design drought rainfall of hydraulic structures for the water requirement and drought frequency of occurrence for the safety of water utilization through this study. Preferentially, this study was conducted to derive the optimal regionalization of the precipitation data that can be classified by the climatologically and geographically homogeneous regions all over the regions except Cheju and Ulreung islands in Korea. Five homogeneous regions in view of topographical and climatological aspects were accomplished by K-means clustering method. Using the L-moment ratio diagram and Kolmogorov-Smirnov test, generalized extreme value distribution was confirmed as the best fitting one among applied distributions. At-site and regional parameters of the generalized extreme value distribution were estimated by the method of L-moments. Design drought rainfalls using L-moments following the consecutive duration were derived by the at-site and regional analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design drought rainfall derived by at-site and regional analysis in the observed an simulated data were computed and compared. In has shown that the regional frequency analysis procedure can substantially more reduce the RRMSE. RBIAS and RR in RRMSE than those of at-site analysis in the prediction of design drought rainfall. Consequently, optimal design drought rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• Korean Institute of Interior Design Journal
• /
• no.6
• /
• pp.45-52
• /
• 1995

The presentation of the method by which the furniture and the architecture can be unified in one category, and the study and the verification on the mutual relation in the shape and the function are having been consistently made till the late twenties. The change of the social structure such as increasing the unit dwelling space with the small scale comes to need the efficiency in using space and the open dwelling space by the systematic spa-cial formation. Therefore, the understanding of the mean-ing and the characteristics of system furnitures as the design method which can meet such needs will be made here in this study. The application of the systematic consideration as the method of interior design means the formation of the firm image on the spacial environment through the mix-ture and link of the heterogeneous factors, the organic connection of each surface, the establishment of the natu-ral relation by linking the heterogeneous materials mutu-ally. and the easiness of the entire plan in the end. This study aims at analyzing and studying the typical charac-teristics by understanding the historical background and methodical principle which enabled the appearance of this kind of thought, and the adapted cases of the wood and metal material system furniture. There may be difference between the structural sub-stance and formative consideration. Transformative furni-ture which consists of the factors is the concept for the encrease of the multi purpose value by mixing the unit cabinets. One system can be separated horizontally, verti-cally, and to the drawers, and it gives us the disengage-ment from the artificial environment, since all the heights and width can be transformed as per each situa-tion of the space. The factors which can not be found in the other existing furniture are as follows. 1. disengagement from the artificial environment. 2. establishing the new productiosn trend as freed from the customers' fashion trend. 3. presenting the producing condition which leads the exact technology. 4. flexibility of the furniture which enables the reduction and enlargement in each situation.

• Korean Journal of Community Nutrition
• /
• v.16 no.6
• /
• pp.697-705
• /
• 2011

This study was conducted to investigate the effects of real time communication digital photography method using Kakao Talk application in smart-phone for the fortification of food consumption monitoring and weight reduction. Thirty-four female college students were randomly assigned to the camera-phone (CP) group or smart-phone (SP) group. Each group participated in the weight control program for 8 weeks. The mean energy intake of CP group during program was 1353.5 kcal and the SP group consumed 1289.2 kcal. The total energy intake of both groups was significantly decreased during the program. The CP group lost 1.9 kg of body weight and 1.9% of body fat and the SP group lost 4.3 kg of body weight and 3.0% of body fat. The body weight was significantly decreased in the SP group compared to the CP group. The triglyceride and total cholesterol, and LDL-cholesterol level of SP group were significantly decreased during the program. However, there were no significant changes in CP group during the program. Also there were no significant changes in lipid profile between two groups. In this study, it is considered that real time communication digital photography method using Kakao Talk application in smart-phone might influence weight control through a trained consumption monitoring. Therefore, smart-phone can lead individuals to rely more heavily on easy-to-monitor visual cues.