• 한국멀티미디어학회논문지
• /
• 제20권12호
• /
• pp.1951-1959
• /
• 2017

Due to the fact that 3D printing is applied to many areas of life, 3D printing models are often used illegally without any permission from the original providers. This paper presents a novel watermarking algorithm for the copyright protection and ownership identification for 3D printing based on the radius curvature of 3D triangle. 3D triangles are extracted and classified into groups based on radius curvature by the clustering algorithm, and then the mean radius curvature of each group will be computed for watermark embedding. The watermark data is embedded to the groups of 3D triangle by changing the mean radius curvature of each group. In each group, we select a 3D triangle which has the nearest radius curvature with the changed mean radius curvature. Finally, we change the vertices of the selected facet according to the changed radius curvature has been embedded watermark. In experiments, the distance error between the original 3D printing model and the watermarked 3D printing model is approximate zero, and the Bit Error Rate is also very low. From experimental results, we verify that the proposed algorithm is invisible and robustness with geometric attacks rotation, scaling and translation.

• 한국안광학회지
• /
• 제2권1호
• /
• pp.127-131
• /
• 1997

An analysis on the corneal diopter power and corneal radius has been carried out the Korean female in the twenties age. The results were as follows. The most contact lens wears have the early stage of the twenties age, but the increase of aging have a decrease. The mean corneal diopter power on the right eye have 44.04 diopter, but left eye have 43.92 diopter. The mean of corneal radius on the right eye have the 7.66 mm, but left eye have the 7.69 mm. As a results, In increasing of the age, Most mean corneal diopter power have increase, but the mean of corneal radius have not change.

• 한국안광학회지
• /
• 제11권3호
• /
• pp.181-185
• /
• 2006

각막곡률반경은 RGP 렌즈를 착용한 대학생(1980~1984년)을 대상으로 측정하였다. 대상자는 187명으로 여자(167), 남자(17) 그리고 원추각막환자(3)이었다. 각막곡률반경은 전체대상자의 평균치가 7.77mm이었고, 좌안과 우안의 측정치 역시 7.77mm이었다. 눈의 수평, 수직경선의 측정치는 7.88mm, 7.65mm이었다. 남자와 여자의 경우는 모두가 수평이 수직경선보다 동일하게 0.22mm 크게 조사되었다. 성별에 따른 곡률반경의 차이는 남자의 경우 평균치가 7.84mm으로 여자의 경우보다 0.08mm 정도 크게 측정되었고, 좌, 우안의 크기는 차이가 없었다. 원추각막환자는 곡률반경의 평균치가 6.86mm으로 정상인 조사대상자의 평균치보다 0.91mm 작게 조사되어 차이가 큰 것으로 나타났다.

• 한국안광학회지
• /
• 제1권2호
• /
• pp.71-76
• /
• 1996

성인 남자 91명, 여자 61명, 총 152 명을 대상으로 각막 중앙부위 3 mm 직경의 곡률반경을 측정한 결과, 남자 우안의 경우 수평경선의 곡률반경은 7.16 mm ~ 8.49 mm, 수직경선의 곡률반경은 7.03 mm ~ 8.34 mm. 좌안의 경우 수평경선은 7.10 mm ~ 8.48 mm, 수직경선은 7.01 mm ~ 8.24 mm였다. 여자 우안의 경우 수평경선의 곡률반경은 7.16 mm ~ 8.45 mm, 수직경선의 곡률반경은 7.11 mm ~ 8.18 mm, 좌안의 경우 수평경선은 7.15 mm ~ 8.43 mm, 수직경선은 7.01 mm ~ 8.26 mm로 분포하고 있었다. 그리고 곡률반경의 평균치는 남자의 경우 7.74 mm, 여자의 경우 7.69 mm 로 남자가 여자보다 약 0.05 mm 정도 크게 나타났으며 전체 평균은 7.71 mm로 측정되었다. 이 값은 Gullstrand 정밀모형안의 수치와 장 일치하였다. 또한 수평경선의 곡률반경 평균치는 7.79 mm, 수직경선의 곡률반경 평균치는 7.64 mm로 수평경선의 곡률반경이 수직경선의 곡률반경보다 0.15 mm 정도 크게 나타났다.

• ETRI Journal
• /
• 제35권3호
• /
• pp.512-522
• /
• 2013

In this paper, the radius weight mean (RWM) and the feature-embedding technique are used to present a novel watermarking scheme for color images. Simulations validate that the stego-images generated by the proposed scheme are robust against most common image-processing operations, such as compression, color quantization, bit truncation, noise addition, cropping, blurring, mosaicking, zigzagging, inversion, (edge) sharpening, and so on. The proposed method possesses outstanding performance in resisting high compression ratio attacks: JPEG2000 and JPEG. Further, to provide extra hiding storage, a steganographic method using the RWM with the least significant bit substitution technique is suggested. Experiment results indicate that the resulting perceived quality is desirable, whereas the peak signal-to-noise ratio is high. The payload generated using the proposed method is also superior to that generated by existing approaches.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.74-81
• /
• 2016

The aim of this study was to find the initial design value of turbine blade for electrical type turbocompound system generating 10 kW. Turbocompound is one of the waste heat recovery system applying to internal combustion engine to recover exhaust gas energy that was about 30 % of total input energy. To design the turbine blade, 1-D mean line flow model was used. Exhaust gas temperature, pressure, flow rate and turbine rotating speed was fixed as primary boundary conditions. The velocity triangles was defined and used to determine the rotor inlet radius and width, the rotor outlet radius at shroud and radius at hub, the rotor flow angles and the number of blades.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.59-62
• /
• 1999

Inception and propagation of electrical tree and properties of Partial discharge(PD) pulses accompanying with tree as a function of needle tip radius in low density polyethylene were discussed. To study on these characteristics in different tip radius, we used specimens with needle-plane electrode system made of LDPE, observed inception and propagation of electrical tree by optical microscope with computer and investigated the characteristics of the phase resolved PD pulses accompanying with propagation of electrical tree. The PD quantities detected and analysed were PD magnitude, mean phase angle, average discharge, and the statistical characteristics of the PD pulses. As the tip radius ${\gamma}$ increases, tree inception stress E$\sub$i/ converges to constance value. This result suggests that tree inception stress E$\sub$i/ increases due to stress relaxation when the tip radius is small. Branch-type electrical tree was formed When E$\sub$i/ is 640-750[kV/mm]. bush-type electrical tree when E$\sub$i/ is 370∼400[kV/mm], branch-like electrical tree when E$\sub$i/ is 370-400[kV/mm].

• 한국수자원학회논문집
• /
• 제54권11호
• /
• pp.863-873
• /
• 2021

다공성 매질에서 오염물 이동에 지배적인 기작인 역학적 분산은 공극 내 유속 차이에 의해서 발생한다. 종분산계수와 종분산지수는 이송확산 모형의 수리분산 매개변수이며, 실험을 통하여 얻어야만 한다. 수리평균반경은 공극 내 물의 흐름 양의 크기와 강도를 표현할 수 있으며, 매질의 물리적 특성인자를 이용하여 계산할 수 있다. 본 연구는 순간주입 추적자실험을 통하여 자갈 다공성매질에서 수리평균반경을 이용하여 종분산지수를 구할 수 있는 거듭제곱형의 경험식을 도출하였다. 경험식은 스케일상수 계산식이 포함되어 있어 이동거리에 따른 종분산지수의 산정이 가능하며, 소규모 유량의 균질한 자갈로 구성된 수로에 적용이 가능할 것으로 기대된다.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.156-160
• /
• 2019

The changes in the dispersion of carbon black in liquid polyisoprene under shear flow with time have been investigated by time-resolved ultra small-angle X-ray scattering (USAXS) method. The analyses of USAXS profile immediately after the start of shear flow clarified that the aggregates of carbon black with a mean radius of gyration of 14 nm and surface fractal dimension of 2.5 form the fractal network structure with mass-fractal dimension of 2.9. After the application of the shear flow, the scattering intensity increases with time at the observed whole entire q region, and then the a shoulder appears at $q=0.005nm^{-1}$, indicating that the agglomerate is broken and becomes smaller by shear flow. The analysis by the Unified Guinier/Power-law approach yielded several characteristic parameters, such as the sizes of aggregate and agglomerate, mass-fractal dimension of agglomerate, and surface fractal dimension of the primary particle. While the mean radius of gyration of the agglomerate decreases with time, the mean radius of gyration of the aggregate, mass fractal dimension, and surface fractal dimension don't change with time, indicating that the aggregates peel off the surface of the agglomerate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.920-924
• /
• 2003

This paper on measurement of curvature radius by the using of laser interferometer and prove. Mean value compared of ball and bearing It is developed program for date creation, and the verification using program. Measurement object center and curvature radius taking of LSC. when it is compared bearing prove with ball prove, the bearing prove can not proper by reason of big uncertainty and If laser setting error decrease, curvature radius get precision radius 10$\^$-5/.