• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.4
• /
• pp.25-29
• /
• 1999

This study was conducted to derive optimal design floods by Gerneralized Extreme Value(GEV) and Weibull-3 distributions for the annual maximum series at ten watersheds along Han,Nagdong, Geum, Yeongsan and Seomjin reiver systems. Adequency for the analysis of flood data used in this study was established by the tests of Independence. Homogeneity , detection of Outlines, L-moments. Design flood sobtaine dby /methods of Moments and L-Moments using different methods for plotting positions in BEV and Weibull-3 distributions were compared by the Relative Mean Errors(RME) and Root MEan Square Errors(RMSE). The result wa found that design floods derived by the L-moments using the other formulas for plotting positions from the viewpoint of Relative Mean Errors and Root Mean Square Errors.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.6
• /
• pp.369-378
• /
• 2016

The design spectrum for Korea, which is known to belong to an intra-plate region, is developed from the ground motion records of the earthquakes occurred in Korea and overseas intra-plate regions. The horizontal spectrum is defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. The developed design spectrum is valid for the estimation both spectral acceleration and displacement.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.755-762
• /
• 2018

The purpose of this study was to compare the FA(faractional anisotropy) and ADC(apparent diffusion coefficient) values, which were derived from diffusion tensor imaging in breast cancer patients. The diffusion gradient used in this study was derived from quantitative diffusion indices using 20 directions(b-value, 0 and $1,000s/mm^2$). Quantitative analysis was analyzed using Pearson's correction and qualitative analysis using for correction coefficients. As a result, $FA_{min}$, $FA_{mean}$ and $FA_{max}$ were $0.098{\pm}0.065$, $0.302{\pm}0.142$ and $0.634{\pm}0.236$, respectively(p > 0.05). The $ADC_{min}$, $ADC_{mean}$ and $ADC_{max}$ were $0.741{\pm}0.403$, $1.095{\pm}0.394$ and $1.530{\pm}0.447$, respectively(p > 0.05). The $FA_{min}$, $FA_{mean}$, and $FA_{max}$ mean values were $0.132{\pm}0.050$, $0.418{\pm}0.094$, and $0.770{\pm}0.164$ for Category 6 and Kinetic Curve Pattern III, respectively. $ADC_{min}$, $ADC_{mean}$, and $ADC_{max}$ were $0.753{\pm}0.189$, $1.120{\pm}0.236$, and $1.615{\pm}0.372$, respectively. Quantitative analysis showed negative correlation between $ADC_{mean}-FA_{mean}$ and $ADC_{max}-FA_{max}$(p = 0.001, 0.003). The qalitative analysis showed ADC 0.628(p = 0.001), FA 0.620(p = 0.001) in the internal evaluations, ADC 0.677(p = 0.001), FA 0.695(p = 0.001) in external evaluations. In conclusion, based on the morphological examination, time to signal intensity graph is the form of wash-out(pattern III) in the dynamic contrast enhance examination, As a result, the $ADC_{mean}$ $1.120{\pm}0.236$ and $FA_{mean}$ values were $0.032{\pm}0.142$ with a negative correlation (Y=1.44-1.12X). Therefore, If we understand the shape of time to signal intensity graph and the relationship between ADC and FA, It will be a criterion for distinguishing malignant diseases in breast cancer.

• Journal of Korean Society on Water Environment
• /
• v.26 no.2
• /
• pp.297-302
• /
• 2010

It is very important to know mean and confidence interval of water-quality constituents such as BOD for water-quality control and management of rivers and reservoirs effectively. The mean and confidence interval of BOD at Anseong2 and Hwangguji3 sampling stations which are located at the border of local governments in Anseong Stream were estimated and analyzed in this paper using Bootstrap technique which is one of non-parametric statistics. The results of Bootstrap were compared with arithmetic mean, geometric mean, Biweight method mean as a point estimator and distribution mean came from the appropriate probability distribution of Log-normal. In Bootstrap technique 12 data set was randomly selected in each year and 1000 samples was produced to get parameter of population. Visual Basic for Applications (VBA) of Microsoft Excel was utilized in Bootstrap. It was revealed that the Bootstrap technique can be used to explain more rigorously and robustly the achievement or violation of BOD target concentration in Total Maximum Daily Load (TMDL).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2303-2309
• /
• 1997

This paper presents a convergence analysis of the stocastic gradient adaptive algorithm based on the least mean absolute third (LMAT) error criteriohn. Under the assumption that the signals involved are zero-mean, wide-sense sateionaryand gaussian, a set of nonlinear difference equations that characterizes the mean and mean-squared behavior of the algorithm is derived. Computer simulation resutls show fairly good agreements between the theoetical and empirical behaviors of the algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.2E
• /
• pp.64-68
• /
• 2008

This paper investigates noise reduction performance and performs convergence analysis of a Variable Error Data Normalized Step-Size Least Mean Square(VEDNSS LMS) algorithm. Adopting VEDNSS LMS results in higher system complexity, but noise is reduced providing fast convergence speed Mathematical analysis demonstrates that tap coefficient misadjustment converges. This is confirmed by computer simulation with the proposed algorithm.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.2
• /
• pp.89-96
• /
• 2015

In this paper, time-frequency analysis algorithms, empirical mode decomposition and local mean decomposition, are reviewed and their applications to nonlinear and nonstationary real-world data are discussed. In addition, their generic extensions to complex domain are addressed for the analysis of multichannel data. Simulations of these algorithms on synthetic data illustrate the fundamental structure of the algorithms and how they are designed for the analysis of nonlinear and nonstationary data. Applications of the complex version of the algorithms to the synthetic data also demonstrate the benefit of the algorithms for the accurate frequency decomposition of multichannel data.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.91-104
• /
• 2005

Tolerance analysis plays an important role in design and manufacturing stages for reducing manufacturing cost by improving producibility. In most production processes encountered in practice, a process mean may shift or drift in the long run although process is in control. This study discusses the feasibility of three most common inflation factors(Bender, Gilson and Six Sigma) as a correction to Root Sum of Squares(RSS) method to compensate heuristically for a shift of process mean and nonnormal component distributions from simulation experiments and proposes the guidelines for choosing the inflation factor.

• Journal of Korea Multimedia Society
• /
• v.20 no.6
• /
• pp.935-949
• /
• 2017

The purpose of this study was to analyze the characteristics of virtual manipulatives apps that can be used to teach students struggling to learn mathematics. To achieve this goal, ten general characteristics of 23 virtual manipulatives apps were evaluated. The instructional, interface, and interactive design features of apps were also evaluated on five-point scale ratings of 18 items. In addition, SPSS frequency analysis and the correlation between each feature was analyzed. Frequently presented instructional contents among 23 virtual manipulatives apps were geometry, arithmetic operation, number concept and measurement. The frequently presented level of instructional contents was lower grade elementary school and kindergarten age. The frequently presented instructional type was the simulation. Regarding the design features, instructional design was rated as the highest (mean = 3.7); interactive design (mean = 3.6) and interface design (mean = 3.3) were also rated higher than neural. In addition, as the learning strategy was appropriately presented, it was evaluated that there was less screen linkage and content error.

• Archives of Pharmacal Research
• /
• v.12 no.4
• /
• pp.289-294
• /
• 1989

A computer program which can differentiate compounds whose absorbance spectra are very similar was developed. The program. [SPECMAN PLUS], written in Pascal provides automated spectral comparison techniques, utilizing the values of Root Mean of Squares (RMS) of differences. This comparison routine of the program can deal with spectra of compounds different concentrations and different spectral recording resolutions. In addition, the program was designed applicable to any spectral data of digital form. The program was applied to the UV spectra of 13 pencillins and 5 cephalosporins, whose absorbance spectra are so similar. As a result, all compounds examined could be differentiated from each other.