• 한국안전학회지
• /
• 제8권4호
• /
• pp.114-119
• /
• 1993

The explosion characteristics of nonhomogeneous LPG-Air mixtures was measured in a cylindrical vessel and a pipe. The maximum explosion pressure, the maximum rate of explosion pressure rise, and the flame propagation velocity were measured and compared with that of homogeneous explosion by changing the effective factors on the explosion of nonhomogeneous mixtures such as pressure difference, effusion time and delay time. Explosion was occured even in the lower concentration than the lean flammability limit of mixture. The maximum explosion pressure was increased with increase of LPG concentration, however, the maximum explosion pressure rise was not in the nonhomogeneous explosion. An d the flame propagation velocity was decreased with nonhomogeneity, however, the maximum explosion pressure was always above 0.7kg/$\textrm{cm}^2$.

• 한국가스학회지
• /
• 제16권1호
• /
• pp.8-14
• /
• 2012

수소는 온실가스 배출을 저감하기 위한 미래 에너지로 고려되고 있지만, 폭발위험에 대한 문제점을 지니고 있다. 따라서 수소가 미래 에너지로 사용되기 위해서는 폭발위험에 대한 연구가 충분히 이루어져야 한다. 폭발위험은 폭발충격에 대한 이해 즉, 폭발과정에서 압력 상승속도에 대한 분석과 밀접한 관계가 있다. 본 연구에서는 폭발에 영향을 미치는 변수, 즉 연소 전후의 비열비, 화학평형상태에서 최대폭발압력, 그리고 연소속도, 이들 변수가 압력 상승속도에 미치는 영향을 살펴보았다. 화학평형상태에서 최대폭발압력과 연소속도는 압력 상승곡선에 큰 영향을 미치는 것을 알 수 있었고, 미연소 가스의 비열비는 초기압력 상승속도보다 최종압력 상승속도에 더욱 영향을 미치고, 연소가스의 비열비는 반대로 초기압력 상승속도에 더욱 큰 영향을 미치는 것을 알 수 있었다. 연소속도는 실험 데이터로부터 구하였으며 밀폐공간에서 수소가스 폭발에서는 폭연에서 폭굉으로 전이가 일어나기에는 연소속도가 매우 느림을 알 수 있었다.

• 한국안전학회지
• /
• 제7권3호
• /
• pp.66-72
• /
• 1992

An experimental study was carried out to analyse the explosion characteristics of flammable gas-air mixtures. Used flammable gases were hydrogen, methane, acethylene, ethylene and pro-pane, explosion Pressure, explosoin pressure rising rate, and flame propagation velocity were measured experimentaly. The maximum explosion pressure and rising rate of flammmalbe gas air mixtures were appeared at the range of slightly higher concentration than the stoichiometric concentration. Initial pressure before explosion was controlled from 0.6 to 2.0kg/cm absolutly. Explosion pressure was increased with increment of the initial pressure, and the relationship between initial pressure and explosion pressure was Pe = KPi. The effect of vessel size on explosion characteristics was also analysed In this experiment. Explosion pressure was increased with in-creasing the vessel size, otherwise explosion pressure rising rate was decreased. When we locate a dummy material in vessel explosion pressure was decreased with increasing the dummy volume but exlosion pressure rising rate was increased.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.95-100
• /
• 2000

This study was performed in Hartmann type dust explosion apparatus in order to research the dust explosion characteristics of hydroxypropyl methyl cellulose(HPMC): minimum explosive limit, minimum ignition energy, limiting oxygen concentration, maximum explosion pressure, rate of pressure rise, etc. The samples of HPMC dust were distributed into 120-140 mesh, 170-230 mesh and 325 under, and the gap distance of the discharge electrode was setted up at 5mm. The experimental results were obtained as follows: (1) The minimum explosive limit for HPMC dust was founded at 180g/㎥. the minimum ignition energy at 9.8mJ and the limiting oxygen concentration at 12%. (2) The maximum explosion pressure of HPMC dust was $8.1kg/cm^2\;{\cdot}\;$abs at the concentration of $500g/m^3$ and the maximum rate of pressure rise was 203.98 bar/sec at the concentration of $480g/m^3$ for 325 under.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.109-114
• /
• 2001

Explosive characteristics of the city gas were determined by using the gas explosion apparatues. The explosive range is determined between lower explosive limit of 5.0% and upper explosive limit of 15.3% at atmosphere and even though the oxygen concentration is decreased, lower explosive limit is not changed, but upper explosive limit is rapidly decreased. The minimum oxygen for combustion is determined 10%. The maximum explosion pressure is determined 5.72$\textrm{cm}^2$ and the maximum rate of explosion pressure rise is oxygen concentration of 12% to determined 160.12$\textrm{cm}^2{\cdot}$sec.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.301-310
• /
• 2001

A study for the dangerous properties measurment of dust explosion was attended by the various dust concentration on Anthraquinone, Sodiumbenzoic acid, Corn starch, soy sauce powder, and cheese powder. As the result, maximum explosion pressure, the maximum rate of pressure rise, autoigntion temperature, and the water content of dust on lower limit explosion concentration was obtained as follows 1. The lower limit explosion concentration on soy sauce powder with the humidity of 65 to 90% increased by increasing the con tent of moisture, and the effect of dry air and moisture air decreased better in make of dry air. 2. The effect of a various dust concentration on autoigntion temperatures is investigated, If the vessel of dust explosion is small size and the easiness of autoignition was controled by air within the vessel, because it was better decreased air with increasing of dust concentration 3. The maximum explosion pressures of Anthraguinone, sodiumbenzoic acid, com starch, soy sauce powder, and cheese powder were 1.0g/$\ell$, 1.0g/$\ell$, 1.5g/$\ell$, 1.5g/$\ell$, and 1.5g/$\ell$, respectively, and the maximum rate of pressure rise were 0.5g/$\ell$, 0.5g/$\ell$, 1.0g/$\ell$, 1.0g/$\ell$, and 1.0g/$\ell$, respectively.

• 한국화재소방학회논문지
• /
• 제29권6호
• /
• pp.20-25
• /
• 2015

2-Ethylhexanoic acid는 플라스틱의 충격보강제를 제조하는 물질로서 공정 중에 폭발위험성을 고찰하기 위하여 산소농도 변화에 따른 폭발범위, 폭발압력, 최대폭발압력상승속도를 실험한 결과 실험온도 $100^{\circ}C$에서, 산소농도 40~70%에서 폭발하한농도 3.2%를 구하였으며, 산소농도 21%에서 폭발하한 농도는 4.0%, 폭발상한 농도는 4.5%를 구하였다. 또한, 2-ethylhexanoic acid의 폭발압력은 산소농도 70%에서 1.4161 MPa의 최대폭발압력을 나타내었으며, 최대폭발압력상승속도를 구한 결과 산소농도 70%에서 62.692MPa/s를 구하였다.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.474-478
• /
• 2018

The use of metals such as aluminum and titanium and the related industrial facilities have been continuously increasing to meet the requirements of the improvement of high-tech products due to the development of industry, and explosion of metal dust. Semiconductor process Metal dust is essential, but research is insufficient. The purpose of this study is to identify risk by analyzing the quantitative risk such as maximum explosion pressure and minimum explosion concentration applied international test standard in order to select the semiconductor process facilities handling dust and to predict possible risk of accidents.

• 한국가스학회지
• /
• 제16권6호
• /
• pp.1-6
• /
• 2012

Mg-Al합금 분진의 마그네슘 성분 비율이 분진폭발특성에 미치는 영향을 알기 위하여 Siwek 20 L 구형 분진폭발시험장치를 사용하여 농도를 변화시키면서 실험적으로 조사하였다. 이를 위하여 체적평균입경이 $151{\sim}160{\mu}m$의 Mg-Al합금 분진을 사용하였다. 그 결과 Mg-Al합금에서의 Mg성분의 증가는 폭발하한농도의 감소와 최대폭발압력의 증가로 나타났다. 또한 Mg-Al합금의 최대폭발압력과 최대폭발압력상승속도는 주로 분진 농도에 의존하였다. 그러나 Mg-Al (40:60 wt%), Mg-Al (50:50 wt%) 및 Mg-Al (60:40 wt%)의 폭발지수(Kst)에 있어서, 마그네슘 성분의 증가에 따라서 폭발지수가 증가함을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제61권1호
• /
• pp.80-88
• /
• 2023

저밀도 폴리에틸렌(Low-density polyethylene, LDPE)은 분진폭발 관련 특성치에 대한 기준이 제시되고 있지 않아 제조 및 취급설비의 안전한 설계가 어렵다. 이 연구에서는 LDPE 제조공정 중 Bag Filter에서 채취한 분진(LDPE 1)과 Silo 등의 설비 외부에 누설된 퇴적 분진(LDPE 2)에서 채취한 2개 시료에 대하여 분진폭발 시험을 수행하였고 그 중 LDPE 2 분진에 대하여 요약하였다. 입도분석 결과, 체적기준 평균입경은 95.04 ㎛, 수밀도는 0~1 ㎛로 나타났다. 최대폭발압력(P_max)은 6.6 bar, 최대폭발압력상승속도는 1500 g/m³에서 366 [bar/s]로 분진폭발지수(K_st)는 99.4 bar·m/s로 ST-1 등급임을 확인하였다. 또한, 최소점화에너지는 10 mJ이며 최소점화온도는 450 ℃로 나타났다. 현재, 제조 및 취급 설계는 고밀도 폴리에틸렌(HDPE)의 특성값을 기초로 한다. 그러나, 시험 결과 LDPE 2 분진이 HDPE(입자지름 61.6 ㎛)보다 위험성이 높은 것으로 나타나 LDPE 제조공정에서 HDPE 설계기준을 적용할 때는 주의가 필요하다.