• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3053-3058
• /
• 2008

We develop a heat exchanger modules for a multi-burner boiler. The heat exchanger module is kind of a heat recovery steam generator (HRSG). This heat recovery system has 4 heat exchanger modules. The 1st module consists of 27 bare tubes due to high temperature exhaust gas and the others consist of 27 finned tubes. The maximum steam pressure of each module is 1 MPa and tested steam pressure is 0.7 MPa. In order to test these heat exchanger modules, we make a 0.5t/h flue tube boiler (LNG, $40\;Nm^3/h$). We tested the heat exchanger module with changing the position of each heat exchanger module. We measured the inlet and outlet temperature of each heat exchanger module and calculated the heat exchange rate. The results show that if module C is placed at second stage (the 1st stage is always module O, bare tube module), there is no need to attach an additional heat exchanger module. In this case the exit temperature of module C is low enough to enter an economizer which is more effective in heat recovery than a heat exchanger module.

• 한국의류학회지
• /
• 제25권8호
• /
• pp.1484-1492
• /
• 2001

For the purpose of standardization and practicability of dyeing by natural dye, the mordanting and dyeing properties of Lithodpermum officinale were studied. Appropriate extraction, dveing and mordanting conditions of Lithodpermum officinale were determined, and the effect of mordanting no dye uptake and color fastness of dyed fabric was investigated. The maximum absorbances of Lithopermum officinale solution were at 521 and 561 mn, shikonin solution were 517 and 556 mn. According to the UV-VIS spectroscopy of shikonin solution showed batho chromic shift with the increase of temperature and the absorbance of shikonin solution increased with the increase of temperature. The color of Lithodpermum officinale solution was affected by pH 8∼9, they became dark, reduced reddish and bluish. The optimum conditions for extraction from Lithodpermum officinale were at 80$\^{C}$ and for 1 hour and at 25$\^{C}$ for 24 hours. And effective dyeing conditions with silk fabric were temperature at 80∼100$\^{C}$ and period for 60min. K/S value and color fastness of dyed fabrics were increased by mordanting treatment. In the case of Lithodpermum officinale light fastness was better than Sophora japonica, Gaesalpinia Sappan, Rhusjara,. Cochineal dyeing fabrics. Perspiration fastness of Lithodpermum officinale were good. Fastness of abrasion and dry-cleaning were good these fastness improvement were generatlly effected by post-mordanting treatment.

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.600-603
• /
• 1995

A series of samples in the Sm1-xSrxCoO3-y(x=0.00, 0.25, 0.50, 0.75 and 1.00) system has been prepared at 1200 ℃ under ambient atmosphere. The X-ray diffraction patterns of the samples with x=0.00 and 0.25 are indexed with orthorhombic symmetry like GdFeO3 and x=0.50 appears to be perfectly cubic. In the tetragonal system (x=0.75), the structure is similar to that of SrCoO2.80. The composition of x=1.00, SrCoO2.52, shows the brownmillerite-type structure. The reduced lattice volume is increased with x value in this system. The chemical analysis shows the τ value (the amount of the Co4+ ions in the system) is maximized at the composition of x=0.50. Nonstoichiometric chemical formulas are determined by the x, τ and y values. The electrical conductivity has been measured in the temperature range of 78 to 1000 K. The activation energy is minimum for those of x=0.25 and x=0.50 with metallic behavior. First-order semiconductor-to-metal transition of SmCoO3 is not observed. Instead, a broad, high-order semiconductor-to-metal transition is observed. In general, the effective magnetic moment is increased with increasing τ values at low temperature. At high temperature, the magnetic moment is maximum for that of x=0.00. The 3d-electrons are collective and give ferromagnetism in x=0.50.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.86-90
• /
• 2007

The cryoprobe used in cryosurgery should be fabricated in milimeter-order size for its practical usage. In general a miniature J-T(Joule-Thomson) refrigerator is applied to a cryoprobe. In case of the miniature J-T refrigerator, the mass flow rate of working fluid is small due to considerable friction in a minute flow path. For that reason, the miniature J-T refrigerator has a limited cooling power. To obtain the large cooling power from the J-T refrigerator, the refrigerator should have large mass flow rate and effective J-T temperature drop. These quantities are closely related to the geometry of the heat exchanger and the expansion nozzle in a cryoprobe, and are contradictory. The large mass flow rate leads to the small J-T temperature drop and vice versa in the miniature J-T refrigerator. Therefore, the optimal design of a cryoprobe to achieve maximum cooling power at fixed tube size and fixed operating temperature is required. This paper presents the design procedure of such case.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.959-965
• /
• 2024

The High Temperature Test Unit (HTTU) was an experimental set-up to conduct separate and integral effects tests of the Pebble Bed Modular Reactor (PBMR) core. The annular core consisted of a randomly packed bed of uniform spheres. Natural convection tests using both nitrogen and helium, and forced convection tests using nitrogen, were conducted. The maximum material temperature achieved during forced convection testing was 1200 ℃. This paper presents the numerical analysis of the flow and temperature distribution for a forced convection test using 3D CFD as well as a 1D systems-CFD computer code. Several modelling approaches are possible, ranging from a fully explicit to a semi-implicit method that relies on correlations of their associated phenomena. For the comparison between codes, the analysis was performed using a porous media approach, where the conduction and radiative heat transfer were lumped together as an effective thermal conductivity and the convective heat transfer was correlated between the solid and gas phases. The results from both codes were validated against the experimental measurements. Favourable results were obtained, in particular by the systems-CFD code with minimal computational and time requirements.

• 한국작물학회지
• /
• 제10권
• /
• pp.85-90
• /
• 1971

야생귀리 Avena sterilis 의 종자휴면을 타파하기 위하여 알콜, 산소, 온수, 저온, thiourea, 제베레린 등을 처리하여 그것들의 효과에 대해서 연구하였다. Thiourea는 약간의 효과만을 보였고 지베레린과 저온처리는 큰 효과를 보였다. 다른 처리들은 아무 효과도 없었다. 1. 지베레린처리 5ppm, 50ppm, 500ppm 중 500ppm은 가장 효과가 컸으며 제1소수에 대해서는 거의 100% 제2소수에 대해서는 66~96%의 효과를 보였다. 지베레린의 효과는 처리농도에 따라 그리고 Avena sterilis 계통간에 차이가 컸으며 그 차이는 통계분석에서도 유의성이 있었다. 2. Thiourea의 처리는 이 실험에서 제1고농도이었던 0.625 x $10^{-2}$ M에서 가장 효과적이었으나 전체적으로 볼 때 thiourea의 효과는 저조하였다. 3. 섭씨 3도를 유지하는 냉장고내에서 1주일간 저온 처리한 제1소수종자들은 90% 제2소수종자들은 10~66%의 발아율을 보이었다. 저온처리에 의한 발아율의 차이는 계통간에도 현저하였다.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.509-515
• /
• 2021

In this study, a pressure vessel for a heat pipe was fabricated by bonding a metal thin film using a polymer compound sheet. In order to confirm the applicability of the experimentally manufactured copper material thin heat pipe of 0.6 mm or less, the pressure resistance and effective thermal conductivity for pressure generated according to the type of the working fluid of the heat pipe were evaluated to suggest the commercialization potential of the thin heat pipe. As a result of evaluating the pressure resistance and effective thermal conductivity performance of the thin heat pipe, the following conclusions were drawn. 1) Using a PEEK-based polymer compound sheet, it was possible to fabricate a pressure vessel for a thin heat pipe with a pressure resistance of up to 1.0 MPa by bonding a copper thin film, and the possibility of commercialization was confirmed at a temperature below 120 ℃. 2) In the case of the effective thermal conductivity performance evaluation test, the effective thermal conductivity of ethanol was higher than that of FC72 and Novec7000, and in the case of ethanol, the maximum effective thermal conductivity was 2,851 W/mK at 3.0 W of heating.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.6-10
• /
• 2012

본 연구의 목적은 styrene-butadiene-styrene(SBS) 블록공중합체와 폐타이어 고무분말(crumb rubber, CR)로 개질한 아스팔트의 저온접착특성에 대해 파라핀오일 가소제의 영향에 대한 것이다. SBS/CR로 개질한 아스팔트 블렌드와 파라핀오일/SBS/CR 아스팔트 블렌드의 온도 민감성을 침입도와 연화점으로 측정하였다. 형광현미경으로 파라핀오일/SBS/CR 아스팔트 블렌드에 대한 개질제들의 분산 상태와 만능시험기로 저온에서 접착성질을 각각 측정하였다. 저온접착시험에서 SBS 함량의 증가와 파라핀오일 함량 5 wt % 및 10 wt %에서 접착강도와 변형률이 증가하였다. $-20^{\circ}C$에서 측정한 접착강도와 강인성은 파라핀오일이 10 wt %와 SBS 공중합체의 양이 6 wt %인 조성에서 최대값을 얻었다. SBS/CR/아스팔트 블렌드에서 파라핀오일의 첨가는 유연성을 부여하는 효과를 나타내고, 저온에서 강인성의 증가를 가져오는 것을 확인하였다.

• 생명과학회지
• /
• 제15권4호
• /
• pp.584-589
• /
• 2005

담체인 황토볼와 Chromobacterium WS 2-14을 이용하여 F-STEP공정(혐기${\rightarrow}$ 호기${\rightarrow}$ 무산소)에서 실제폐수에 존재하는 인산을 효율적으로 제거하기 위해 최적 황토볼 크기 및 소성 온도, 폐수의 초기 pH,폐수의 초기 인산염 농도, 운전온도, 그리고 통기를 검토했다. 최적 조건은 다음과 같다. 황토볼 크기 및 소성 온도, $2\~4mm,\;960^{\circ}C$; 실페수의 초기pH, 6.0; 실페수의 초기 인산 농도, 5.0mg/1. 운전온도, $30^{\circ}C$; 그리고 통기, 5.0L/min등이 얻어졌다. 그리고 최적 운전조건을 이용해서 pilot test을 65일 동안 진행했다. 인산 평균 제거율은 $92.0\%$였고. 또한 최종 유출수에서 COD와 BOD의 평균 제거율은 각각 77.1와 $74.2\%$였으며, SS의 경우는 평균 제거율이, $86.4\%$였다. 이상의 결과로부터 황토볼을 담체로 이용한 Biofilter System은 실제폐수에 존재하는 인산 제거 가능성을 암시했다.

• 한국산학기술학회논문지
• /
• 제17권9호
• /
• pp.322-328
• /
• 2016

본 연구는 열대 유종류인 Metacylis tropica의 최적배양조건을 구명하기 위해 5일 동안 수온, 염분 및 먹이원인 미세조류의 효과를 조사하였다. M. tropica는 작고 투명한 난형의 피갑을 가지며, 피갑의 구강부 지름, 갑장 및 갑폭의 크기는 각각 $36.7{\mu}m$, $49.5{\mu}m$ 및 $44.5{\mu}m$였다. 수온별 실험에서, M. tropica의 최고밀도와 성장률은 수온 $30^{\circ}C$에서 각각 340.7 cells/mL와 1.1/day로 나타났다. 낮은 염분은 M. tropica의 성장에 악영향을 미쳤으며 염분 33 ppt에서 최고밀도가 840 cells/mL로 나타났다. 먹이실험에서, 먹이로 Isochrysis galbana를 공급하였을 때, 가장 높은 성장을 보였다(배양밀도, 413 cells/mL; 성장률, 1.2/day). 본 실험을 종합하여보면, M. tropica는 rotifer에 비해 작은 크기를 가지기 때문에 자어기에 입이 작은 어류의 초기먹이생물로 적합하며, 수온 $30^{\circ}C$, 염분 33 ppt에서 I. galbana를 먹이로 공급하는 것이 M. tropica의 대량배양을 위한 최적배양조건인 것으로 판단된다.