• 제목/요약/키워드: Maximum dry density

검색결과 204건 처리시간 0.028초

BCI3Ne 혼합가스를 이용한 III-V 반도체의 고밀도 유도결합 플라즈마 식각 (High Density Inductively Coupled Plasma Etching of III-V Semiconductors in BCI3Ne Chemistry)

  • 백인규;임완태;이제원;조관식
    • 한국전기전자재료학회논문지
    • /
    • 제16권12S호
    • /
    • pp.1187-1194
    • /
    • 2003
  • A BCl$_3$/Ne plasma chemistry was used to etch Ga-based (GaAs, AIGaAs, GaSb) and In-based (InGaP, InP, InAs and InGaAsP) compound semiconductors in a Planar Inductively Coupled Plasma (ICP) reactor. The addition of the Ne instead of Ar can minimize electrical and optical damage during dry etching of III-V semiconductors due to its light mass compared to that of Ar All of the materials exhibited a maximum etch rate at BCl$_3$ to Ne ratios of 0.25-0.5. Under all conditions, the Ga-based materials etched at significantly higher rates than the In-based materials, due to relatively high volatilities of their trichloride etch products (boiling point CaCl$_3$ : 201 $^{\circ}C$, AsCl$_3$ : 130 $^{\circ}C$, PCl$_3$: 76 $^{\circ}C$) compared to InCl$_3$ (boiling point : 600 $^{\circ}C$). We obtained low root-mean-square(RMS) roughness of the etched sulfate of both AIGaAs and GaAs, which is quite comparable to the unetched control samples. Excellent etch anisotropy ( > 85$^{\circ}$) of the GaAs and AIGaAs in our PICP BCl$_3$/Ne etching relies on some degree of sidewall passivation by redeposition of etch products and photoresist from the mask. However, the surfaces of In-based materials are somewhat degraded during the BCl$_3$/Ne etching due to the low volatility of InCl$_{x}$./.

선회다짐기를 이용한 노상토의 다짐특성 (Characteristic of Subgrade Soil using Gyratory Compactor)

  • 이관호
    • 한국산학기술학회논문지
    • /
    • 제19권4호
    • /
    • pp.571-577
    • /
    • 2018
  • 본 선회다짐기는 도로 현장에서 가장 많이 사용하는 다짐 롤러의 다짐 특성을 반영하기 위해 개발된 실내 다짐장비이다. 기존의 충격을 이용한 프록터 다짐과는 달리 압축력과 회전을 통한 전단력을 이용한 현장 롤러의 다짐특성을 모사하였다. 본 연구의 목적은 기존의 프록터 다짐과정에서 얻기 힘든 전단응력 및 다짐중의 밀도변화 특성 등을 선회다짐기를 이용하여 평가하고, 이를 도로설계에 반영할 수 있는 기초자료로 활용하는 것이다. 이러한 선회다짐기를 이용하여 도로 현장 및 지하매설물 시공 시 가장 많이 사용되는 모래 및 노상토의 다짐 특성을 분석 및 평가하였다. 선회다짐기를 이용한 다짐 특성은 기본적으로 선회다짐 횟수와 시편의 높이, 다짐밀도, 간극비, 포화도 및 전단응력이다. 선회다짐 횟수가 증가할수록 시편의 높이는 작아지고, 간극비는 작아지고, 다짐 밀도는 증가하고, 포화도는 증가하며, 전단응력은 커지는 경향을 보였다. 전단응력은 다짐 초기에 200kPa 수준에서 시작하여 선회다짐 횟수 50회 정도가 되면 대략 330-350 kPa 수준으로 증가하였다. 동일한 시편의 경우 함수비가 커짐에 따라 다짐 밀도, 포화도 및 전단응력이 증가하는 경향을 보였다. 선회다짐기를 이용한 다짐은 밀도 및 전단응력 등 도로 설계 시 필요한 물성을 측정할 수 있는 장점을 가지고 있어 이를 도로설계시 반영한다면 더 공학적인 도로설계를 할 수 있을 것이다.

재배조건에 따른 맥간의 형태적 및 물리적 특성변화에 관한 연구 II. 재식밀도와 시비량이 맥간의 형태적 및 물리적 특성에 미치는 영향 (Studies on Morphological and Physical Characteristics of Wheat and Barley Culms under Different Cultural Conditions II. Effects of Planting Density and Amount of Fertilizer Applied on Morphological and Physical Characteristics of Barley Culms)

  • 조장환;이홍석
    • 한국작물학회지
    • /
    • 제14권
    • /
    • pp.111-115
    • /
    • 1973
  • 대맥재배에 있어서 재식밀도와 시비량의 차이가 간의 형태적, 생리적 특성의 변화와 수량에 미치는 영향을 구명코저 시험한 결과를 요약하면 다음과 같다. (1) 시비량에 있어서는 표준시구보다 배비구에서 간 내, 외경, 간 벽후가 두꺼우며 단위간 건물중이 높고, 간장이 다소 커지며 수중, 수수가 많았다. (2) 재식밀도에 있어서는 소식일수록 도복에 견딜수 있는 방향으로 변화되었으나, 수량면을 고려하면 $5{\times}$5cm, $10{\times}$10cm 구가 알맞은 편이고 $15{\times}$15cm구와 $20{\times}$20cm구는 거의 비슷하였다. (3) 좌절하중, 좌절시 Bending moment, 단면2차 moment, 단면계수등은 표준비구보다 배비구가 높아 도복에 강하며, 재식밀도면에서는 소식일수록 전기형질의 수치가 높았다. (4) 도복지수는 밀식일 경우는 표준비구가 높으며 $10{\times}$10cm구 이상 소식일 때는 시비량과 재식거리에 따른 도복지수의 차이는 없었다. (5) 수량면에서는 배비가 좋으며, 안전다수를 위한 재식거리는 $5{\times}$5cm구가 가장 좋았다.

  • PDF

Growth and Yield of Forage Rice Cultivar 'Yeongwoo' according to Nitrogen Application Amount in Reclaimed Paddy Field

  • Eun-Ji Song;Sun-Woong Yun;Ji-Hyeon Mun;In-Ha Lee;Su-Hwan Lee;Nam-Jin Chung
    • 한국작물학회지
    • /
    • 제67권4호
    • /
    • pp.326-334
    • /
    • 2022
  • This study was carried out to investigate the optimal nitrogen concentration level suitable for forage rice growth by hydroponic cultivation in the salinity concentration of 0.1~0.3% which is similar to that of Muan reclaimed paddy field, and based on this results, to estimate optimal nitrogen fertilization level by field experiment in Muan reclaimed paddy for maximum forage production by cultivation of Yeongwoo rice. As a result of the growth response to the salt and nitrogen concentrations in the hydroponic cultivation experiment, the growth amount increased as the nitrogen concentration increased in the range of 0~24 me/L in the absence of salt stress. However, at a salt concentration of 0.1~0.3%, the growth amount was the highest at a nitrogen concentration of 12 me/L, and at higher nitrogen concentrations of that, the rice growth decreased as the nitrogen concentration increased. Therefore, nitrogen concentration of 12 me/L was judged to be an appropriate concentration for forage rice growth at salt concentration of 0.1~0.3%, and a nitrogen fertilization amount level corresponding to a nitrogen concentration of 12 me/L was actually applied to the Muan reclaimed paddy field for forage rice cultivation during two years. The amount of nitrogen fertilizer was tested with three treatments, which are 18 kg/10a considered appropriate, and 1.5 times and 2 times of the appropriate amount, and the planting density was tested with 2 treatments of 15 hills/m2 and 26 hills/m2. As a result of the reclaimed paddy field experiment, the yield was the highest when nitrogen fertilizer was applied at 18 kg/10a in the planting density of both treatments. Looking at the yield according to planting density, the high planting density plot yielded higher than the low planting density plot. In other words, when the planting density was 26 hills/m2 and the nitrogen fertilization amount was 18 kg/10, the highest dry matter yield of 1,763 kg/10a was obtained. From the results of hydroponics and reclaimed field experiments, we could conclude that the productivity of forage rice decreased more as the nitrogen concentration increased when the nitrogen concentration was higher than the optimal level under salt stress.

잣나무 묘목(苗木)의 생육환경(生育環境) 요인(要因)에 따른 생장해석적(生長解析的) 연구(硏究) (A Study on the Growth Analysis of Pinus koraiensis Seedings under Various Relative Light Intensities and Planting Densities)

  • 김영채
    • 한국산림과학회지
    • /
    • 제78권3호
    • /
    • pp.314-322
    • /
    • 1989
  • 물질생산적(物質生産的) 측면(側面)에서 잣나무에 대한 광환경(光環境) 및 식재밀도(植栽密度)를 달리한 생육조건(生育條件)과 그에 따른 묘목(苗木)의 생장관계(生長關係)를 추적(追跡)하고 생육환경(生育環境)의 개선방안(改善方案)을 위(爲)한 양묘생산(養苗生産)의 기초확립(基礎確立)을 목적(目的)으로 광도(光度) 및 식재밀도(植栽密度)를 각각 4개(個) 수준(水準)으로 구분(區分) 생육(生育)시킨 잣나무 묘목(苗木)(2-2)를 대상으로 영국계(英國系)의 생장해석법(生長解析法)을 도입(導入), 이들에 대한 묘목(苗木)의 상대생장율(相對生長率)(Relative growth rate)과 순동화율(純同化率)(Net assimilation rate) 등을 산출(算出)하였다. 또한 상대생장율(相對生長率)과 순생장율(純生長率) 간(間)의 상관관계(相關關係)를 통계적(統計的)으로 비교(比較) 분석(分析)하였던 바 잣나무 묘목(苗木)의 생육(生育) 환경개선방안(環境改善方案)의 모색이 요구(要求)되었기에 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 묘목(苗木)의 건중량생장(乾重量生長)의 변화(變化) 양상(樣狀)은 각(各) 처리구간(處理區間) 공(供)히 생육초기(生育初期)에는 큰 차이(差異)가 없었으나 생육후기(生育後期)에는 차이(差異)를 나타냈고 광도(光度)가 높을수록, 그리고 식재밀도(植栽密度)가 소(疎)할 수록 증가(增加)하여 광조건(光條件)의 변화(變化)가 물질생산(物質生産)에 미치는 영향(影響)에 주요(主要)한 변수(變數)로 작용(作用)되었다. 2. 엽면적생장(葉面積生長)은 상대광도(相對光度) 63%구(區)가 가장 컸고, 그보다 광도(光度)가 높거나 낮아질 수록 점차(漸次) 감소(減少)하였다, 상대광도(相對光度) 19%구(區)가 가장 적게 나타났다. 3. 상대생장율(相對生長率)(RGR)은 상대광도(相對光度) 63%구(區)에서 $6{\times}6/m^2$ (36본(本))구(區)의 6월(月) 생장(生長)이 최대(最大)였고, 상대광도(相對光度) 19% 구(區)에서 $12{\times}12/m^2$(224본(本))구(區)의 9월(月) 생장(生長)이 최소치(最少値)를 나타냈다. 4. 순동화율(純同化率)(NAR)은 생육초기(生育初期)에는 감소(減少)하다가 8월(月)과 9월(月)을 기점(起點)으로 증가(增加) 하였으며 상대광도(相對光度) 100%의 $6{\times}6$=36본(本)$/m^2$구(區)에서 6월(月)의 생장(生長)이 최대치(最大値)를, 그리고 상대광도(相對光度) 19%구(區)에서 $12{\times}12$=144본(本)$/m^2$구(區)의 9월(月) 생장(生長)이 최소치(最少値)를 나타냈다. 5. 상대생장율(相對生長率)과 순동화율(純同化率) 간(間)에는 모두 고도(高度)의 유의성(有意性)이 인정(認定) 되었으며 이들은 정(正)의 상관관계(相關關係)에 있었다.

  • PDF

골재 입도분포가 도로포장용 롤러전압 콘크리트에 미치는 영향 연구 (A Study on the Gradation Effect of the Property of Roller Compacted Concrete Pavement)

  • 송시훈;이승우
    • 한국도로학회논문집
    • /
    • 제17권3호
    • /
    • pp.49-58
    • /
    • 2015
  • PURPOSES : The use of environmentally friendly construction methods has been recently encouraged to reduce fuel consumption and the effects of global warming. For this purpose, the roller compacted concrete pavement (RCCP) construction method has been developed. RCCP is more environmentally friendly and economically efficient than general concrete by reducing the amount of CO2 generated through the application of a smaller amount of cement. RCCP has a number of advantages such as an easy construction method, low cost, high structural hydration performance, and aggregate interlocking. However, mix design standards and construction guidelines of RCCP are required for domestic application. In addition, a study on aggregate selection, which has an effect on the characteristics of RCCP, is necessary owing to a limited number of researches. Thus, the aggregate effect on the performance of RCCP in securing the required strength and workability was evaluated in consideration of domestic construction. METHODS : Sand and coarse aggregates of both 19mm and 13mm in maximum size were used in this study. Four types of aggregate gradations (s/a = 30%, 58%, and 70% for the sand and coarse aggregate of 19mm in maximum size, and s/a = 50% for a combination of the three types of aggregates) were set up to investigate the effects of the PCA band on the RCC characteristics. The conditions of s/a = 30% and 70% were evaluated to check the gradation effect outside of the recommended band. The conditions of s/a = 58% and 50% were used because they are the optimum combination of the two and three types of aggregates, respectively. RCCP gradation band was suggested gradation with a proper construction method of RCCP by synthetically comparing and analyzing the correlation of optimum water content, maximum dry density, and strength of requirements through its consistency and compaction test. RESULTS : The lower and upper limit lines are insufficient to secure a relatively strong development and workability compared to an aggregate gradation in the RCCP gradation band region. On the other hand, the line in the RCCP gradation band and the 0.45 power curve in the RCCP gradation band region were satisfactory, ensuring the required strength and workability. CONCLUSIONS : The suitable aggregate gradation on RCCP process should meet the RCCP gradation band area; however, fine particles passing through a #60 sieve do not need to be within the recommended gradation band because the influence of this region on such fine particles is small.

Plasmid Stability in Long-Term hG-CSF Production Using $_{L}-Arbinose$ Promoter System of Escherichia coli

  • Choi, Seung-Jin;Park, Doo-Hong;Chung, Soo-Il;Jung, Kyung-Hwan
    • Journal of Microbiology and Biotechnology
    • /
    • 제10권3호
    • /
    • pp.321-326
    • /
    • 2000
  • To examine the feasibility of the long-term production of the human granulocyte colony stimulating factor (hG-CSF) using the $_{L}-arabinose$ promoter system of Escherichia coli, flask relay culture and cyclic fed-batch culture were performed. In the flask relay culture, it was found that the pismid was maintained stably up to about 170 generations in an uninduced condition, whereby the cells could also maintain the capability of expressing hG-CSF expression were maintained stably up to at least 100 generations. In contrast, in the cyclid fed-batch culture, segregational plasmid instability was observed within about 4 generations after induction, even though the cell growth and hG-CSF production reached their maximum balues, 78.0 g/l of dry cell weight and 7.0 g/l of hG-CSF, respectively. It would appear that, when compared to the flask relay culture, the high-cell density and high-level expression of hG-CSF in the cyclic fed-batch cultrure led to the segregational plasmid instability; in other words, a severe metabolic burden existe on the cells due to the high-level expression of hG-CSF. Accordingly, based on these long-term cultures, the segregational and structural plasmid instability was observed and a strategy to overcome such problems could be designed.

  • PDF

Effects of Nanocalcium Supplemented Milk on Bone Calcium Metabolism in Ovariectomized Rats

  • Park, H.S.;Jeon, B.J.;Ahn, J.;Kwak, H.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권8호
    • /
    • pp.1266-1271
    • /
    • 2007
  • This study examined effects of calcium supplemented milk on bone loss in ovariectomized rats. Twenty four Sprague-Dawley female rats, 7 weeks-old, were divided into 4 groups, ovariectomized and fed diets containing: 1) control, no Ca supplemented milk, 2) ovx 1, Ca carbonate supplemented milk, 3) ovx 2, ionized Ca supplemented milk, and 4) ovx 3, nano Ca supplemented milk. All rats were fed 1 ml of milk containing 20 mg supplemented Ca. After 18 wk feeding, body weight gain and food efficiency ratio were significantly different between ovx 1 and ovx 3. Serum concentration of calcium and phosphorus were not different among groups. However, there was a significant difference in calcium content of dry femoral weight in ovx 3 compared with the control and ovx 2. In addition, femoral bone mineral density ($g/cm^2$) was significantly greater in ovx 3 than in other groups (p<0.05). The ovx 3 group showed the highest stiffness (N/mm), maximum energy (N) in femur and trabecular bone area (%). The present study indicated that nano Ca supplementation in milk may be an effective way to enhance bone calcium metabolism for ovariectomized rats.

YBaCuO계 초전도체 합성 및 특성에 미치는 분쇄효과 (Effect of Grinding on Preparation of YBaCuO-System and its Superconductivity)

  • 류호진
    • 공업화학
    • /
    • 제8권5호
    • /
    • pp.811-815
    • /
    • 1997
  • 본 연구에서는 고상반응에 의한 $YBa_2Cu_3O_{7-y}$계 고온 초전도체의 결정구조 및 초전도 특성에 미치는 원료분말의 분쇄효과를 명백히 할 목적으로 $Y_2O_3$, $BaCO_3$, CuO의 혼합물을 유성볼밀을 사용하여 건식혼합분쇄를 행하였다. 얻어진 분쇄산물의 비표면적은 60분 분쇄할 때까지 증가하며. 그 후 분쇄시간이 증가함에 따라 감소하는 경향을 보였다. 소결체의 임계온도는 분쇄시간에 의존하지 않고, 약 90K로 일정한 값을 나타내었다. 한편, 소결체의 임계전류밀도는 분쇄시간에 크게 의존하였으며, 60분 분쇄한 소결체에서 최대치 $150A/cm^2$를 나타내었다.

  • PDF

갯버들 근계의 토양 입자 해리 억제효과에 관한 연구 (A Study on the Reduction of Soil Particle Dissociation Rate by the Root of 'Salix Gracilistyla')

  • 이춘석;박명안;강호철
    • 한국환경복원기술학회지
    • /
    • 제6권3호
    • /
    • pp.69-78
    • /
    • 2003
  • The main purpose of this study was to verify the shore margin protection effect of the root system of Salix gracilistyla Miq. developed from direct sticking cuttings on wetland, focusing on the effect of the root system reducing soil particle dissociation rate in water. The soil dissociation rate was examined through slaking tests with cylindric pure soil column at maximum particle density and the same size column of root reinforced soil. The dry weight of remained soil was measured after 5, 10, 15, 30minutes and 1, 6, 12, 24, 48hours inundation. As results, the soil particles began to dissociate severely at 10 minutes and only 10% of soil particles were left after 25minutes inundation. The stable slope angle of pure soil was $36^{\circ}$after 24 hours. On the other hand, the columns of root reinforced soil were stable even after 24hours, being dissociated only 7.2% of soil particles. So, it was revealed that the root system was very effective materials protecting more than 80% of soil particle from dissociation in inundation.