• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2017

Purpose : This study was conducted among 195 adults in their 20s. To analyze the impact of the slope types of the scapulae on the plantar surface of the foot, the average pressure (AP), the maximum pressure (MP), the average of local distribution values, and the average movement of the center of pressure (COP) of the different slope types of the scapulae were compared. Method : The anterior-posterior slopes of the scapulae were measured by comparing the slopes of the left and right sides of the scapulae based on the differences in the height and the slope of the coracoid process and the angulus inferior scapulae. Those whose left side of the scapulae had an anterior slope were categorized as type 1, and those whose right side of the scapulae had an anterior slope, as type 2. The average plantar pressure, the center of plantar pressure, the maximum plantar pressure, and local distribution values were analyzed using a plantar pressure analyzer of the FSA. Result : In terms of the AP of the left and right feet, there was no statistically significant difference both in types 1 and 2 on the left and right feet. The comparison results of the MP and the average of local distribution values of the two slope types of the scapulae showed that there was no statistically significant difference on the X-axis both in types 1 and 2 on the left and right feet, but that there was a large statistically significant difference on the Y-axis both in types 1 and 2. That is, the MP of the right foot of the left anterior slope type was located more on the hindfoot than that of the right anterior slope type, and the MP of the left foot of the left anterior slope type was located more on the hindfoot than that of right anterior slope type. Conclusion : This study can be used as fundamental data to predict differences in the location and size of the COP and changes in plantar pressure distribution depending on the slope types of the scapulae, and control the distribution for therapeutic purposes.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2022

Purpose : Kinesio taping applied to the ankle varies, and if the overall ankle is taped as much as possible, several effects, including balance, can be expected, but clinically the cost reduction for intervention is very important. Therefore, this study attempted to find out the optimal way to the effect and cost of kinesio taping on ankle dynamic balance. Methods : The subject of this study was 24 university students in their 20s (male: 13, female: 11), who received sufficient explanation of the purpose and method of the study. The Cumberland ankle instability tool (CAIT) questionnaire was used for the degree of ankle instability of the study subjects. If the subject's CAIT score was 28 points or more, it was classified as a stable ankle, and if the score was 24 points or less, it was classified as functional ankle instability (FAI). In this study, Biodex Balance System^® measurement equipment was used to calculate the dynamic balance of study participants. The application of kinesio taping was performed by one physical therapist to attach in the same way, and a method of wrapping the ankle joint was applied in the eight-shaped bandage. Results : The results are as follows in before and after taping of the stable ankle and FAI group. There was no significant difference in the overall, anterior-posterior, and medial-lateral stability index. The comparison is as follows between groups for the differences (post-pre value) in before and after the application of kinesio taping. There were no significant differences between groups in all the overall, anterior-posterior, and medial-lateral stability index. Conclusion : In this study, no significant difference in kinesio taping was found in the dynamic balance of stable ankle and FAI (overall, anterior-posterior, and medial-lateral). It is necessary to continue to study ways to find the maximum effect while minimally attaching them to the application method of ankle kinesio taping.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.5
• /
• pp.428-433
• /
• 2004

Sinus floor augmentation has been proven an effective treatment procedure to increase bone volume in the posterior edentulous maxilla. Autogenous bone considered to be the best material for reconstructive bone surgery and has been successfully used as a graft material to augment posterior maxilla. However, the collection of autogenous bone required extra risks for morbidity and complaints. So, various bone graft materials included ${\beta}$-tricalcium phosphate(${\beta}$-TCP) has been introduced for replacing the autogenous bone. The objective of this clinical study was to determine the predictability of endosseous implant placed in a maxillary sinus with ${\beta}$-TCP grafting. We performed sinus elevation with ${\beta}$-TCP to install the implant in the 10 maxillary cases. The prosthetic procedure was performed 6-9 months after. The implant-prosthetics was checked about 1 year. We checked the implant and measured the maximum bite force to evaluate the function of the implant. There was not observed the specific problem and complication in dental implant and maxillary sinus in the grafted materials. The maximum bite force was 558N in case of natural tooth, 365N in implant without grafting, 318N in implant with ${\beta}$-TCP grafting. There was no significant difference between with and without sinus grafting on maximum bite force(p>0.05). As though the long term check-up is needed, the grafting of ${\beta}$-TCP as a osteoconductive materials can expand the volume and induce dense new bone formation in maxillary sinus. So, this short-term results support that ${\beta}$-TCP can be a suitable material for sinus augmentation.

• Journal of Sport and Applied Science
• /
• v.7 no.2
• /
• pp.1-12
• /
• 2023

Purpose: The purpose of this study was to investigate the possibility of modified swing to prevent shoulder injury by analyzing differences in the muscle activation patterns of upper limb by the swing method in wheelchair badminton players. Research design, data, and methodology: 10 wheelchair badminton players participated in the experiment as subjects and performed 10 high clears and 10 smashes in both traditional and modified swing methods toward a shuttlecock hung at the height of racket impact point. For each trial, activation patterns of biceps brachii, triceps brachii, anterior deltoid, and posterior deltoid were measured from the upper limb participating in the swing from which the duration, peak, and root mean square (RMS) of electromyography (EMG) activities from swing initiation to shuttle impact were calculated. The maximum swing velocity of the smash and the distance of the high clear were also measured with both methods to compare differences in the swing velocity and shuttle hit distance. Results: Differences in the EMG peak and RMS of the anterior deltoid by swing methods were shown to differ by the skill type, being higher in the traditional swing method than the modified during only the high clear. The EMG peak and RMS, and the duration of the posterior deltoid were higher and longer with the traditional swing method than the modified during both the smash and high clear. The intensities of the biceps brachii and triceps brachii activities measured during the smash and high clear were higher in the traditional swing method than the modified, and the biceps brachii and triceps activity durations during the high clear were shorter in the modified swing method than the traditional. The maximum swing velocity of the smash was faster with the traditional swing method than the modified, while the distance of the high clear did not differ significantly. Conclusions: These results suggest that the modified swing can be an effective performance method for preventing shoulder injuries without undue loss of impact power in wheelchair badminton players by reducing excessive loads imposed on the shoulder and allowing the optimal use of the elbow extension.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.2
• /
• pp.53-62
• /
• 2024

Objective: The purpose of this study was to analyze the differences in kinematic factors according to stretching treatment, myofascial release treatment, and static stretching treatment conditions during squat. Method: Twelve males with resistance training experience participated in this study. Participants performed squats without treatment (Pre-Test), and performed squats after treatment with the myofascial release technique (MRT) and static stretching (SS) on different days (post-test). Squat movements were captured using eight motion capture cameras (sampling rate: 250 Hz), and the peak joint angles of the ankle, knee, hip, and pelvis were calculated for each direction. One-way repeated ANOVA and Bonferroni post hoc analyses using SPSS 27 (IBM Corp. Armonk NY, USA) were used to compare the peak joint angle of the lower extremity joints and pelvis among the normal condition (squat without treatment), MRT condition (squat after MRT treatment) and SS condition (squat after static stretching). The statistical significance level was set at .05. Results: It was observed that the maximum ankle joint flexion angle during squats was statistically reduced under conditions of myofascial release and static stretching (p<.05), in comparison to the scenario where no stretching was performed. Furthermore, static stretching was found to enhance the maximum hip flexion angle during squat (p<.05), whereas the myofascial release stretching technique resulted in the minimal posterior pelvic tilt angle (p<.05). Conclusion: Employing myofascial release stretching as a preparatory exercise proved to be more efficacious in maintaining body stability throughout the execution of high-intensity squat movements by effectively managing the posterior tilt of the pelvis, as opposed to foregoing stretching or engaging in static stretching.

• Imaging Science in Dentistry
• /
• v.40 no.4
• /
• pp.179-185
• /
• 2010

Purpose : Cortical bone thickness is one of the important factor in mini-implant stability. This study was performed to investigate the buccal cortical bone thickness at every interdental area as an aid in planning mini-implant placement. Materials and Methods : Two-dimensional slices at every interdental area were selected from the cone-beam computed tomography scans of 20 patients in third decade. Buccal cortical bone thickness was measured at 2, 4, and 6 mm levels from the alveolar crest in the interdental bones of posterior regions of both jaws using the plot profile function of $Ez3D2009^{TM}$ (Vatech, Yongin, Korea). The results were analyzed using by Mann-Whitney test. Results : Buccal cortical bone was thicker in the mandible than in the maxilla. The thickness increased with further distance from the alveolar crest in the maxilla and with coming from the posterior to anterior region in the mandible (p<0.01). The maximum CT value showed an increasing tendency with further distance from the alveolar crest and with coming from posterior to anterior region in both jaws. Conclusion : Interdental buccal cortical bone thickness varied in both jaws, however our study showed a distinct tendency. We expect that these results could be helpful for the selection and preparation of mini-implant sites.

• The korean journal of orthodontics
• /
• v.33 no.6 s.101
• /
• pp.437-451
• /
• 2003

The purpose of this study was to measure maximum bite force and to investigate its relationship with anteroposterior, vertical, and transverse facial skeletal measurements. From among the dental students at the College of Dentistry, forty subjects (26 male and 14 female) were selected. With two sets of strain gauge, maximum bite force at the right and left first molars and anterior teeth was measured in the morning and afternoon. After taking lateral and posteroanterior cephalograms, fifty and nineteen variables were evaluated, respectively Paired t-tests and an independent t-test were done and correlation coefficients were obtained. 1. The maximum bite force at the first molars was $68.0\pm13.9kg$. in males and $55.6\pm10.5kg$ in females (p<0.05) while the force at the anterior teeth was $8.4\pm4.9kg\;and\;1.1\pm3.4kg$ respectively (p<0.05). 2. Some tendency for a greater value of maximum bite force at the preferred side was observed but not statistically significant (p>0.05). 3. Significant difference was observed between the strong bite force group and the weak bite force group in some cephalometric and other measurements (p<0.05). N-S-Ar, S-Ar-Go, FH-Hl, IMPA and MMO showed a significant difference in posterior maximum bite force (P). N-S-Ar and FH-H1 also showed a significant difference in anterior maximum bite force (A). 4. Several cephalometric variables showed some correlation with maximum bite force (p<0.05). N-S-Ar, S-Ar-Go, UGA, FH-H6, FH-H1, body weight and MMO were significantly correlated with posterior maximum bite force (P). Go-Me, P-1 and IMPA were significantly correlated with anterior maximum bite force (A).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.1_2
• /
• pp.146-153
• /
• 1992

In the outpatient clinic, we have many patients who suffer from temporomandibular joint disorders. These vary from MPD syndrome to osteoarthrosis, and many cases have tender spots or areas on the temporomandibular joint region and/or masticatory muscles. Further, they frequently have masticatory muscle pain when opening the jaw. This paper presents the results of our research on the differential diagnosis for tendernesses and pain on opening the jaw in the temporomandibular joint region and the masticatory muscles by joint cavity pumping with local anesthestic. The areas of tenderness and jae-opening paw in 65 patient suffering from temporomandibular joint disorder were examined and recorded before and after anesthetizing the upper joint cavity with 2% lidocaine. Maximum interincisal distance was similarly recorded. The results were as follows : In the area surrounding the upper joint cavity including the lateral pterygoid muscle, the tenderness and jaw-opening pain vanished almost entirely after anesthesia. This was considered a direct infiltrative effect of the local anesthesia. After the anesthesia, 86% of the tendernesses on the sternocleidomastoid muscles, and 66% of those on the posterior belly of the diagstric muscles vanished, while the disappearance rates on the masseter, temporal, and medial pterygoid muscles were 50~60%. Apart from the temporomandibular region, pain on opening the jaw was found on the masseter, temporal, posterior belly of the digastric muscles, and medial pterygoid muscles before anesthesia. The disappearance rates after anesthesia were 90~100% except for the pain of the posterior belly of the digastric muscles, for which the rate was 66%. These results suggest that more than 88% of the tendernesses on the sternocleidomastoid muscle, more than 60% of the tendernesses and jaw-opening pains on the digastric muscle, and more than half of the tendernesses and almost all of the jaw-opening pains in the jaw-closing muscles are referred pains from the temporomandibular joint. The tendernesses that had no change after anesthesia were considered to be derived from spasms of the muscles proper. Generally, maximum interincisal distance increased after anesthesia. The average distance was 34mm before anesthesia, but increased to 41mm after anesthesia. In a few cases, however little or no change was found in those distances. In these cases, pathological changes were found in the joint cavities arthrographically or arthroscopically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.611-624
• /
• 1993

The purpose of this study was to analyze the stress distribution of the natural teeth, the implant, the prosthesis and the supporting tissue according to the types of implant and connection modality in the five-unit fixed partial denture with a implant pier abutment. A Two dimensional stress analysis model was constructed to represent a mandible missing the first and second premolars and first molar. The model contained a canine and second molar as abutment teeth and implant pier abutments with and without stress-absorbing element. Finite element models were created and analyzed using software ANSYS 4.4A for IBM 32bit personal computer. The results obtained were as follows. 1. Implant group, compared to the natural teeth group, showed a maximum principal stress at the superior portion of implants and a stress concentration at :he neck and end portion. 2. Maximum principal stress and maximum Von Mises stress were always lower in the case of rigid connection than nonrigid connection. 3. A cylinder type implant with stress absorbing element and screw type implant were generally similar in the stress distribution pattern. 4. A screw type implant, compared to the cylinder type implant, showed a relatively higher stress concentration at both neck and end portion of it. 5. Load B cases showed higher stress concentration on the posterior abutments in the case of nonrigid connector than rigid connector. 6. A maximum displacement was always lower in the case of rigid connection than nonrigid connection. These results suggest that osseointegrated implant can be used as an intermediate abutment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.75-84
• /
• 1995

This study was designed as a reference of vertical dimension in prosthetic treatment. The author analyzed six facial measurements, namely, (1) the height of lower face at maximum intercuspal position, (2) the height of lower face at resting position, (3) midface, (4) external ear and lateral wall of orbit, (5) interpupillary distance, (6) distance between pupil and mouth in the 100 Won-kwang Univ. Dental collage students(50 : male, 50 : female), who have normal occlusion, no posterior prosthesis, no experience of orthodontic treatment, and no deformity of facial soft tissue and no temporomandibular dysfunction. The results of this study were as follows : 1. The length of midface was shortest and the inter-pupillary distance was longest in both male and female. 2. The length difference with the length of midface and lower face at maximum intercuspal position was 5.64mm in male and 2.23mm in female, so the lower face was longer, 3. The facial measuring component, similar to lower face at maximum intercuspation, was the length of between medial wall of external ear and lateral wall of orbit. It's difference was 1.3mm in male, 1.77mm in female, and the lower face was shorter. 4. The difference of lower facial length in resting position and maximum intercuspation was 2.48mm in male, 2.24mm in female, the length of resting position was therefore longer. 5. The most clost correlation with the height of maximum intercuspal positioning lower face was resting lower face in both groups.