• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권5호
• /
• pp.224-229
• /
• 2014

The maxillary posterior area is the most challenging site for the dental implant. Although the sinus graft is a predictable and successful technique for rehabilitation of atrophic and pneumatized posterior maxilla, when there is severe destruction of alveolar bone, a very long crown length remains challenging after successful dental implants installation with sinus graft. We performed vertical augmentation of the maxillary posterior alveolar ridge using the allogenic block bone graft with a simultaneous sinus graft using allogenic and heterogenic bone chips. After about six months, we installed the dental implant. After this procedure, we achieved a more favorable crown-implant fixture ratio and better results clinically and biomechanically. This is a preliminary report of vertical augmentation of maxillary posterior alveolar ridge using allogenic block bone graft and simultaneous maxillary sinus graft. Further research requires longer observation and more patients.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.276-281
• /
• 2010

The maxillary posterior area is the most challenging site for the dental implant. After missing of teeth on maxillary posterior area due to periodontal problems, the remaining alveolar ridge is usually very thin because of not only pneumatization of maxillary sinus but also destruction of alveolar bone. The maxillary sinus bone graft procedure is one of the most predictable and successful treatments for the rehabilitation of atrophic and pneumatized endentulous posterior maxilla. But, in case of severe destruction of alveolar bone due to periodontal problems, very long crown length is still remaining problem after successful sinus graft procedures. We performed vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft. After this procedures, we could get more favorable crown-implant ratio of final prosthodontic appliance and more satisfactory results on biomechanics. This is a preliminary report of the vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft, so requires more long-term follow up and further studies.

• 대한치과의사협회지
• /
• 제57권3호
• /
• pp.149-160
• /
• 2019

Atrophic alveolar ridge of maxillary anterior area is commonly observed after the extraction of teeth in patients with severely compromised periodontal disease, causing difficulties with implant placement. Successful esthetics and functional implant rehabilitation rely on sufficient bone volume, adequate bone contours, and ideal implant positioning and angulation. The present case report categorized the ridge augmentation techniques using guided bone regeneration (GBR) on the maxillary anterior site by Seibert classification. Case I patient presented for implant placement in the position of tooth #11. The alveolar ridge was considered a Seibert classification I ridge defect. Simultaneous implant placement and GBR were performed. Eight months after implantation, clinical and radiological examinations were performed. Case III patient presented with discomfort due to mobility of the upper maxillary anterior site. Due to severe destruction of alveolar bone, teeth #11 and #12 were extracted. After three months, the alveolar ridge was considered a Seibert classification III ridge defect. A GBR procedure was performed; implantation was performed 6 months later. Approximately 1-year after implantation, clinical and radiological examinations were performed. During the whole treatment period, healing was uneventful without membrane exposure, severe swelling, or infection in all cases. Radiographic and clinical examinations revealed that atrophic hard tissues and buccal bone contour were restored to the acceptable levels for implant placement and esthetic restoration. In conclusion, severely resorbed alveolar ridge of the maxillary anterior area can be reconstructed with ridge augmentation using the GBR procedure so that dental implants could be successfully placed.

• 구강회복응용과학지
• /
• 제23권2호
• /
• pp.145-155
• /
• 2007

The advent of osseointegration and advances in biomaterials and techniques have contributed to increased application of dental implants in the restoration of maxillary partial edentulous patients. Often, in these patients, soft and hard tissue defects result from a variety of causes, such as infection, trauma, and tooth loss. These create an anatomically less favorable foundation for ideal implant placement. Reconstruction of the atrophic maxillary alveolar bone through a variety of regenerative surgical procedures has become predictable; it may be necessary prior to implant placement or simultaneously at the time of implant surgery to provide a restoration with a good long-term prognosis. Regenerative procedures are used for horizontal and vertical ridge augmentation. Many different techniques exist for effective bone augmentation. The approach is largely dependent on the extent of the defect and specific procedures to be performed for the implant reconstruction. It is most appropriate to use an evidenced-based approach when a treatment plan is being developed for bone augmentation cases. The cases presented in this article clinically demonstrate the efficacy of using a autogenous block graft, guided bone regeneration, ridge split, immediated implant placement technique on the atrophic maxillary area.

• Journal of Periodontal and Implant Science
• /
• 제38권2호
• /
• pp.207-214
• /
• 2008

Purpose: The aim of augmentation of the alveolar ridge is to restore absorbed alveolar ridges for future implant site or esthetic prosthodontic restoration. The present clinical report describes the anterior maxillary augmentation cases using a soft tissue rotated palatal flap, and considers various problems of before and after surgery. Method: First & second patients were treated by vascularized interpositional periosteal-connective tissue(VIP-CT) flap for horizontal soft tissue augmentation. Especially second patient was progressed with bone grafting at the same time. Third patient was treated by the same flap with bone graft and implant placement in single tooth missing premaxillary area. Result: The obtained horizontal augmentation width measured $0.5{\sim}2.7\;mm$. Conclusion: This technique constitutes a viable approach for augmentation the anterior sector of alveolar ridge with the placement of dental implants. But it needs correct diagnosis preparation and careful surgery skill.

• 대한심미치과학회지
• /
• 제30권1호
• /
• pp.33-39
• /
• 2021

상악 전치부 치아가 치조골 소실로 인해 상실되었을 때 심미적인 수복을 위해 소실된 치조골을 골재생 술식을 통해 회복 시키는 것은 매우 중요합니다. 발치와 동시에 치조골의 소실이 진행되기 때문에 발치 직후 치조제 보존술을 시행하는 것은 심미적인 수복을 위해 중요한 의미가 있습니다. 하지만 이 과정에서 primary closure를 하지 못하는 것이 골재생에 부정적인 영향을 줄 수 있습니다. 이를 극복하기 위해 발치와 내의 granulation tissue를 이용해 primary closure를 시도할 수 있습니다. 이렇게 할 경우 open wound에 비해 골재생에 유리한 환경을 제공함으로써 치조제가 잘 보존됨을 넘어 잘 증강되는 것을 증례를 통해 확인할 수 있었습니다.

• The Journal of Advanced Prosthodontics
• /
• 제8권1호
• /
• pp.70-74
• /
• 2016

In the maxillary anterior region, reconstruction of the localized alveolar ridge defect is very important in enhancing the esthetics of fixed partial denture. A 40-year-old female patient presented with a chief complaint of the inconvenience and unesthetic problem of 3-unit maxillary anterior prosthesis due to alveolar ridge resorption. After removal of old prosthesis, intraoral examination revealed moderate (buccolingually 4 mm) ridge deficiency in missing tooth region, leading to the diagnosis of Class I alveolar ridge defect. One of the reconstruction techniques to overcome this problem might be a technique that combines two types of soft tissue augmentation techniques. The purpose of this paper was to demonstrate the new combined technique of roll flap and combination onlay-interpositional graft utilized to acquire sufficient dimension of recipient area by one time of operation and to present the esthetic improvement of fixed partial denture by using this procedure in case of maxillary anterior localized ridge defect.

• 구강회복응용과학지
• /
• 제33권1호
• /
• pp.47-54
• /
• 2017

상악 구치부는 치조제 골 흡수와 상악동 함기화로 인해 가용골의 양은 제한되고 골질도 좋지 않은 경우가 대부분으로 상악동저의 거상 후 가용골의 증대와 취약한 골에서 임플란트의 견고한 초기 고정을 획득하는 것이 중요하다. 심하게 위축된 치조제의 경우 임플란트의 적절한 초기 고정 획득을 위해 측방접근법을 통한 상악동 골이식술이나 지연 임플란트 식립법이 추천되나 본 연구에서는 수직적 잔존골 높이가 3 mm 이하인 상악 구치부 세 증례를 통해 수직 골 소실이 심한 상악 구치부에서 전통적인 개념과는 달리 최소침습적 수술법으로 치조정 접근을 통한 상악동 골이식과 동시에 임플란트 식립을 시행하여 합병증 없이 충분한 길이의 임플란트 식립이 가능함을 제안한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권1호
• /
• pp.46-52
• /
• 2009

The maxillary posterior edentulous region presents unique and challenging conditions in implant dentistry. The height of the posterior maxilla is reduced greatly as a result of dual resorption from the crest of the ridge and pneumatization of the maxillary sinus after the loss of teeth. Materials previously used for sinus floor grafting include autogenous bone, allogeneic bone, xenogenic bone and alloplastic materials. Autogenous bone is the material of choice, but its use is limited by donor-site morbidity, complications, sparse availability, uncontrolled resorption and marked volume loss. One way to overcome this problem would be to use bone substitutes alone as a osteoconductive scaffold for bone regeneration from the residual bone or in combination with allogeneic bone, which also has osteoinductive properties. The purpose of this article is to describe a double layers technique of demineralized and mineralized bone graft materials instead of autogenous bone in sinus floor augmentation of deficient posterior maxillary alveolar process and to report our experience with this technique. Our results show that maxillary sinus augmentation using mineralized and demineralized bone materials, when installed simultaneously with the implant or not, is good results for bone healing.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.575-579
• /
• 2006

Purpose : The purpose of this study was to evaluate peri-implant bone loss and implant success on anterior maxillary alveolar ridges and Compare Class III and Class IV ridges in the aspect of peri-implant bone loss. Material and Methods : 14 patients (aged 21 to 68, 6males and 8females), who lacked maxillary anterior teeth and were installed from January 2000 to April 2003 at Samsung Medical Center, were selected. The type of implant used included 30 $Br\ddot{a}nemark$ implant. They were taken with digital tomographic and conventional intraoral radiographic examinmation, and were treated with implant installaion without bone augmentation. The peri-implant bone resorption was measured at the mesial and distal aspect of implant on the conventional intraoral radiographs. Results : The study classified the anterior maxillary alveolar ridge and measured peri-implant bone resorption from the period of implant installation to the 2nd year after functional loading radiographically. The study revealed no statistically significant difference between two groups, which was classified by its morphology. The average bone resorption on healing period before loading was 0.18mm and 0.18mm, the 1st year of loading period, 0.77 mm and 0.84mm, and on the 2nd year of loading period, 0.07mm and 0.06mm, respectively on both Class III and class IV. Conclusion : In the knife edge form of anterior maxillary residual ridges(Class IV), implant placement without ridge augmentation does not have significant difference with that of Class III alveolar ridge in the concern of Implant success after 2 year functional loading period in the aspect of peri-implant bone resorption radiographically.