• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.6
• /
• pp.609-616
• /
• 2007

Purpose: The aim of the present study was to evaluate the effect of Bio-Oss on bone formation in terms of healing period and type of membrane so that determine the most suitable condition for implant fixation in grafted maxilla. Material & Method: Forty-five biopsy specimens from graft site were evaluated. Sinus lift was performed in the patients with reduced alveolar bone height(less than 5mm). The specimen was taken at the time of implant fixation, which was performed at least 5 months after the sinus lift procedure. All specimens were stained with H&E and Trichrome staining and evaluated histomorphometrically. Result: The results showed that Bio-Oss particle was in direct contact with newly formed bone in all cases. In the present study, the amount of newly formed bone and the residual bone substitute material were not statistically different according to various membrane and different healing period. There was no difference between the histological feature of the specimen of 5 and 31 months. No statistical significance was detected between male and female. Conclusion: The result implies that Bio-Oss does not seem to be resorbed over time regardless of the type of the membranes. The further investigation is needed to clarify this issue with the extended period of follow-up.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.376-381
• /
• 2008

In mixed dentition there exists many empty spaces in the arch due to eruption of permanent teeth and exfoliation of primary teeth. The empty spaces makes it difficult to apply fixed orthodontic appliances. Horseshoe Appliance can be used effectively at this stage, holding the whole dentition in one piece. It covers every surface of erupted teeth and prevents extrusion and rotation of single tooth. By using intermaxillary elastic force, remodeling of the alveolar bone is opposite in each arch. In patients who were treated with horseshoe appliance, forward growth of maxilla, labioversion of maxillary incisors and linguoversion of mandibular incisors were obtained. Minimum downward and clockwise rotation of mandible was shown, so increasing anterior facial height was minimized.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.229-239
• /
• 1992

This study was performed to define the adaptation patterns of each skeletal components to the flexures of cranial bases, using 91 males from the ages of 17 to 36 and 64 females from the ages of 16 to 34, without orthodontic or prosthetic treatment experiences and with pleasant profiles as subjects. The conclusions are as follow: 1. When considering the changes of flexure of cranial base (Ba-SE-FMN) in both sexes, changes in the anterior cranial base angle to the PM Vertical line (SE-FMN/PMV) were greater than the changes in the posterior cranial base angle to the PM Vertical line (Ba-SE/PMV). Subsequently the nasomaxillary complex showed antero-superior rotating effect as the cranial base angles were increased and postero-inferior rotating effect as they were decreased. 2. Horizontal mandibular angle (Ba-SE-Me) was increased in both sexes as cranial base angle increases (Ba-SE-FMN) and it decreased as the latter was decreases. There by indicating compensatory effects. 3. Maxillary angle (SE-FMN-A) was decreased in both sexes as cranial base angle (Ba-SE-FMN) increases and it increased as the latter was decreased. There by indicating compensatory effects. 4. Mandibular ramus angle to posterior cranial base was decreased in both sexes as cranial base angle increases. There by indicating compensatory effect to anteriorly displaced maxilla and the mandibular ramus angle was increased as the cranial base angle decreases. There by indicating compensatory effect to posteriorly displace maxilla. 5. The length of posterior upper facial height was decreased in both sexes as the cranial base angle increases and it increased as the latter was decreased.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.221-224
• /
• 2009

Purpose: The treatment of children mandibular condyle fracture that is severely displaced is controversial. The conservative treatment of it may lead to complications - mandibular deficiency, asymmetry, malocclusion and temporomandibular joint dysfunction. Moreover, open reduction carries risks for growth retardation, facial nerve injury, scarring and joint stiffness. The aim of this article is to present an alternative technique of the treatment by using a threaded Kirschner wire and external rubber traction. Materials: From November 2005 to May 2008, three patients underwent the management by using a threaded Kirschner wire and external rubber traction. A threaded Kirschner wire was inserted in the condylar segment by using a C-arm. We applied the external rubber traction, and we reducted the segment progressively until complete reduction. The mandibular - maxillary fixations were removed after 3 weeks, and patients went into training for mouth opening. Results: The technique didn't result in complications - joint dysfunction, facial nerve injury, sore, infection and nonunion during follow - up period. Radiologic follow - up examinations revealed correct reduction in all patients. In all cases, we found restoration of preinjury occlusion and temporomandibular joint function. Conclusions: Closed reduction of children mandibular condyle fracture by using a threaded Kirschner wire and external rubber traction did achieve anatomic reduction and restore mandibular height. This alternative technique is simple, effective, inexpensive, easy to apply and minimally invasive.

• The korean journal of orthodontics
• /
• v.20 no.3 s.32
• /
• pp.519-539
• /
• 1990

It is the aim of this study to observe the distribution of various facial types in class III malocclusion and to characterize the craniofacial features of the very facial types. Cephalometric headptates of a hundred and ten persons showing bilateral class III malocclusion whose mean age was 12.51 years and sixty nine persons of normal occlusion whose mean age was 12.23 years were measured and statistically analyzed. The following summary and conclusions were drawn. 1. Affording the bases for SNA and SNB, $35.45\%$ of sample showed normally positioned maxilla and protruded mandible, $30.00\%$ for retruded maxilla and normally positioned mandible, $15.45\%$ for retruded maxilla and protruded mandible, $10.90\%$ for both maxilla and mandible within normal range and $8.20\%$ for miscellaneous types were arranged in class III malocclusion. 2. $52.72\%$ of sample showed neutrodiveigent, $35.45\%$ for hyperdivergent and $11.81\%$ manifested hypodivergent mandible in class III malocclusion. 3. Providing the bases for facial and mandibular planes, $33.63\%$ of sample showed prognathic and neutrodivergent, $20.90\%$ for mesognathic and hyperdivergent, $17.27\%$ for prognathic and hyperdivergent and $15.45\%$ for mesognathic and neutrodivergent were arranged in class III malocclusion. 4. The class III malocclusion brought out shorter cranial base, smaller saddle angle, and larger articular and genial angle. It showed retropositioned maxilla and forward positioned mandible in spite of no significant differences in linear measurements of mandible. Anterior lower facial height was significantly larger in class III malocclusion, while posterior total facial and anterior total facial heights exhibited no significant differences. 5. It is suggested class III malocclusion was attributed to shorter cranial base, smaller saddle angle, maxillary deficiency and/or retrusion, mandibular excess and/or protrusion, excessive vertical growth of the anterior lower face, and their complex as well.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.69-78
• /
• 2001

Alveolar cleft exists in 75% of cleft patients, In alveolar cleft patients, alar base is widening, palatal fistular formation, maxillary growth disturbance & tooth loss of adjacent area is raised, Alveolar bone grafting, especially iliac bone grafting, is a general treatment method. As operation timing, bone grafting is classified with primary, early secondary, secondary, & late secondary, Here we report cleft width, marginal bone height, bone resorption rate, grafted shape & bone densities after secondary iliac bone grafting was done in the Dept. of oral and maxillofacial surgery of chonbuk national university hospital. We compared cleft width to bone resorption rate and grafted shape. Also, alveolar bone densities of grafted and contralateral site was compared with Emago 3 package? (Oral Diagonostic System, The Netherlands), The data obtained were analyzed using Spearman's rho coefficients and sign test with SPSS for window, The results were obtained as follows. 1. As alveolar cleft width is increase, bone resorption rate is, too. This relation showed significant difference(P<.01). 2, In proximal & distal area, alvolar cleft width and bone graft contour after bone grafting had a reverse proportional difference. It was not significant difference(P>.05). 3. After 3 month, in bone density results by using Emago 3 package? with periapical standard view, occlusal view & panoramic view, differences between grafted bone and alveolar bone of contralateral site didn't show a significant difference(P>.05). Thus, differences of bone densities in the alveolar bones didn't exist.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.643-648
• /
• 2001

Class III malocclusion usually becomes manifested at a very early age, most typically evidenced clinically by the appearance of either an edge-to-edge incisor relationship or an anterior crossbite. Anterior crossbite, by it-self, retards growth of maxilla, and accelerates growth of mandible. So, treatment should be started as early as the patient cooperates, removing any factors or forces that inhibit growth and development in the same physiologic maxillary displacement direction. The facial mask is effective in most developing Class III patients, because the appliance system affects virtually all areas contributing to a Class III malocclusion. Thus, the facial mask can be applied to most developing Class If cases regardless of the specific etiology. In these cases, the results were followed. Anterior crossbite was corrected by anterior movement of maxilla and downward backward rotation of mandible and simultaneously, lower facial height was increased. So, it can be concluded that the facial mask is effective in treating growing patients with a deficient maxilla.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.473-476
• /
• 2010

Purpose: Torus palatinus is a bony prominence at the middle of the hard palate. The size varies from barely discernible to very large, from flat to lobular. This oral exostosis is not a disease or a sign of disease, but if large, may be a problem. So, we present the clinical and histopathologic features and applied therapy and provide a comprehensive review of the rare case of the symptomatic exostoses. Methods: A 37-year-old woman had slowly growing exophytic nodular mass of the bone that arises the midline suture of the hard palate. The patient was concerned about discomfort associated with movement of her tongue and about frequent irritation of the palatal mucosa during mastification of the hard food. The patient had a large, unilobulated torus palatinus. It extended from the area adjacent to the canine to a point beyond the junction with the soft palate. The mass was oblong in shape, measuring about 3 cm long, 2 cm wide, and 0.8 cm in height. Results: Before surgical intervention a CT was obtained for the sake of estimating the thickness of the bone between the exostoses and the maxillary antrum and floor of the nose. The surgical procedure was performed with the patient under general anesthesia. Removal of the exostosis was performed after midline mucoperiosteal incision with osteotome and diamond burr. Histologic finding revealed decalcified dense bony tissue, the presence of lacunae, and normal osteocytes. Conclusion: Surgical removal is recommended when one or more of the following condition exist: interference with the construction of prosthesis, interference with oral function, irritation or pathology of the overlying tissue, inability of the patient to maintain proper oral hygiene, and fear of malignancy or other psychologic trauma. We report a rare case of the torus arising in hard palate with symptoms.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.475-482
• /
• 2019

This report is a case of 76-year old male patient who had difficulty in swallowing, pronunciation and suffered regurgitation of food. The patient lacks uvula and both tonsils, had short palatoglossal arch and soft palate, as well as defective left palatopharyngeal arch. The height and width of the soft palate defect were measured by reconstructing the Computed Tomography (CT) image in three dimensions. Phonation and soft palate obstructing ability were examined by nasometry and nasal endoscopy. Evaluations on phonetics and swallowing were done and improvements were shown. The patient was satisfied with the results of treatment.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.338-343
• /
• 2020

PURPOSE. The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet. MATERIALS AND METHODS. Maxillary and mandibular casts of 169 healthy dentitions were subjected to 3D dental scanning, and analyzed using CAD software. The crown forms were divided into tapered, square, and ovoid based on the mesiodistal dimensions at 20% of the crown height to that at 40%. The degree of labial inclination of the upper central incisor was defined as the angle between the occlusal plane and the line connecting the incisal edge and tooth cervix. The incisal edges of the right upper and lower central incisor that in contact with lines parallel to the occlusal plane were used to determine the overbite and overjet. One-way ANOVA was performed to compare the labial inclination, overbite, and overjet among the crown forms. RESULTS. The crown forms were classified into three types; crown forms with a 20%/40% dimension ratio of 1.00±0.01 were defined as square, >1.01 as tapered, and <0.99 as ovoid. The labial inclination degree was the greatest in tapered and the least in square. Both overbite and overjet in tapered and ovoid were higher than those in square. CONCLUSION. Upper central incisor crown forms were related to their labial inclination, overbite, and overjet. It was suggested that the labial inclination, overbite, and overjet should be taken into consideration for the prosthetic treatment or restoring the front teeth crowns.