• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.447-451
• /
• 1995

The purpose of this study was to investigate the effects of cleft on mesiodistal dimensions of permanent teeth in unilateral cleft lip and palate patients. Mesiodistal dimensions of permanent teeth were measured to the nearest 0.01mm on plaster models of 50 subjects with unilateral complete cleft lip and palate, 10 siblings and 50 Controls. The results were as follows : 1. Tooth size discrepancy in the cleft group was significant in all regions except maxillary cuspid, mandibular cuspid and mandibular first premolar. 2. Some of the mesiodistal dimensions of the teeth on the cleft side were significantly smaller than those of their antimeres on the non-cleft side in the cleft group. 3. A comparison of mesiodistal dimensions of the teeth for the right and left sides of the control group showed no statisically significant differences excepts maxillary lateral incisor. 4. Asymmetries of mesiodistal dimensions of the teeth in the sibling group was not found except maxillary first molar.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.4
• /
• pp.304-312
• /
• 2016

PURPOSE. The aim of this study was to investigate the stress distribution of 2-short implants (2SIs) installed in a severely atrophic maxillary molar site. MATERIALS AND METHODS. Three different diameters of internal connection implants were modeled: narrow platform (NP), regular platform (RP), and wide platform (WP). The maxillary first molars were restored with one implant or two short implants. Three 2SI models (NP-oblique, NP-vertical, and NP-horizontal) and four single implant models (RP and WP in a centered or cantilevered position) were used. Axial and oblique loadings were applied on the occlusal surface of the crown. The von Mises stress values were measured at the bone-implant, peri-implant bone, and implant/abutment complex. RESULTS. The highest stress distribution at the bone-implant interface and the peri-implant bone was noticed in the RP group, and the lowest stress distribution was observed in the 2SI groups. Cantilevered position showed unfavorable stress distribution with axial loading. 2SI types did not affect the stress distribution in oblique loading. The number and installation positions of the implant, rather than the bone level, influenced the stress distribution of 2SIs. The implant/abutment complex of WP presented the highest stress concentration while that of 2SIs showed the lowest stress concentration. CONCLUSION. 2SIs may be useful for achieving stable stress distribution on the surrounding bone and implant-abutment complex in the atrophic posterior maxilla.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.693-702
• /
• 2005

Accurate timing and sequence of eruption of permanent teeth are indicies of growth and essential for pediatric dentistry and pediatric clinical orthodontics. From the children brought to the Yonsei Dental Hospital during 2001 to 2003, 654 boys and 542 girls, ranging in age from five to fourteen years, were selected and analysed. The following was concluded. 1. Eruption time of maxillary teeth is 6.81 years in boys, 6.78 years in girls for central incisor, 8.30 years in boys, 7.98 years in girls for lateral incisor, 10.28 years in boys, 10.04 years in girls for canine, 9.74 years in boys, 9.90 years in girls for first premolar, 10.87 years in boys, 10.41 years in girls for second premolar, 6.25 years in boys, 6.54 years in girls for first permanent molar, 12.21 years in boys, 12.03 years in girls for second permanent molar 2. Eruption time of mandibular teeth is 6.00 years in boys, 6.06 years in girls for central incisor, 6.99 years in boys, 6.74 years in girls for lateral incisor, 9.83 years in boys, 9.17 years in girls for canine, 9.92 years in boys, 9.75 years in girls for first premolar, 10.66 years in boys, 10.39 years in girls for second premolar, 5.99 years in boys, 5.75 years in girls for first permanent molar, 11.92 years in boys, 12.17 years in girls or second permanent molar. 3. The following eruption sequence was observed the first permanent molar erupted first, followed by the central incisor, the lateral incisor, the first premolar, the canine, the second premolar and the second permanent molar in the maxilla. The first permanent molar erupted first, followed by the central incisor, the lateral incisor, the canine, the first premolar, the second premolar and the second permanent molar in the mandible.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.207-217
• /
• 1999

The purpose of this study was to compare the retentive forces of various types of clasps for removable orthodontic appliances for primary and mixed dentition. Seven metal models of a single tooth and two teeth were made, including maxillary left primary canine, first primary molar, second primary molar and first molar. Retentive forces of Adams clasp, circumferential clasp(C clasp), Jackson clasp, Duyzing clasp, arrowhead clasp, ball clasp, eyelet clasp, and triangular clasp were measured by Universal Testing Machine(Zwick Z020, Germany). The obtained results were as follows. 1. Jackson clasp and Adams clasp showed the highest retentive force among single tooth clasps. 2. C clasp showed the lowest retentive force, and there was no statistically significant difference in retentive force between mesial end C clasp and distal end C clasp. 3. Eyelet clasp showed the highest, and ball clasp showed the lowest retentive farce among clasps for interdental undercut. 4. Triangular clasp showed higher retentive force than ball clasp.

• The Korean Journal of Health Service Management
• /
• v.4 no.2
• /
• pp.63-72
• /
• 2010

The present study purposed to prevent oral diseases and to improve oral health in children. For this purpose, we selected 70 cases who are 5~7 years old preschoolers at the kindergarten affiliated to G College in Gyeongsangbukdo, and analyzed the general patterns of oral care and the relation of the patterns with dental plaque and deciduous dental caries in the children. Specifically, we conducted oral examination and applied pit and fissure sealant according to the eruption of deciduous molar and first molar. In addition, we executed the 1st and 2nd tooth brushing instruction (TBI), and surveyed S-OHI and PHP twice. Excluding 14 preschoolers who did not appear in the 2nd survey, we performed the study with 56 preschoolers and drew conclusions as follows. 1. The number of decayed or missed or filled teeth among deciduous teeth was 3 or more in 42.9% of female children, and 46.4% of male children, so male children showed a slightly higher rate. 2. The degree of dental plaque formation was $1.64{\pm}1.22$ among the surveyed children. 3. The oral health index was lower after TBI than before in all the children (P<.001). 4. Change in the oral health index was particularly larger in 7 year old female children (p<.005). 5. The patient hygiene performance index was lower after TBI than before in both the buccal surface and lingual surface of the children (p<.005). 6. The patient hygiene performance index was lower after TBI than before in all of male children's teeth except the right maxillary first deciduous molar (p<.001).

• Journal of Korean Dental Science
• /
• v.7 no.2
• /
• pp.66-79
• /
• 2014

Purpose: To analyze the amount and pattern of tooth movement and the changes in arch dimension of mandibular dentition after orthodontic treatment using a new three-dimensional (3D)-indirect superimposition method. Materials and Methods: The samples consisted of fifteen adult patients with class I bialveolar protrusion and minimal anterior crowding, treated by extraction of four first premolars with conventional sliding mechanics. After superimposition of 3D-virtual maxillary models before and after treatment using best-fit method, 3D-virtual mandibular model at each stage was placed into a common coordinate of superimposition using 3D-bite information, which resulted in 3D-indirect superimposition for mandibular dentition. The changes in mandibular dental and arch dimensional variables were measured with Rapidform 2006 (INUS Technology). Paired t-test was used for statistical analysis. Result: The anterior teeth moved backward, displaced laterally, and inclined lingually. The posterior teeth showed statistically significant contraction toward midsagittal plane. The amounts of backward movement of anterior teeth and forward movement of posterior teeth showed a ratio of 6 : 1. Although the inter-canine width increased slightly (0.8 mm, P<0.05), the inter-second premolar, inter-first molar, and inter-second molar widths decreased significantly with similar amounts (2.2 mm, P<0.05; 2.3 mm, P<0.01; 2.3 mm, P<0.001). The molar depth decreased (6.7 mm, P<0.001) but canine depth did not change. Conclusion: A new 3D-indirect superimposition of the mandibular dentitions using best-fit method and 3D-bite information can present a guideline for virtual treatment planning in terms of tooth position and arch dimension.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.259-269
• /
• 1987

The purpose of this study was to evaluate the specialized Orthopantomograms and standard films compared with Waters' views in the diagnosis of maxillary sinusitis. The author analysed the types of mucosal thickening, the types of bony wall change, the relation between the types of chief complaints and mucosal thickening on the Waters' views of 156 patients with 206 maxillary sinuses demonstrating radiographic changes. And the pathologic change of antral floor was observed on 187 standard films and total amount of agreement in the diagnosis of maxillary sinusitis was evaluated at 156 specialized Orthopantomograms and 187 standard films. The results were obtained as followings. 1. Among 206 mucosal thickenings classified by 6 types, generalized increased radiopacity was 69 cases (33.5%) and the entire thickening of mucosa except an ostium area was 66 cases (32.0%), 2. The bony wall change was seen in 128 cases (62.1%) and the incidence of indistinct antral wall was the highest as 55 cases (43.0%) among 5 types. 3. Among 148 chief complaints, pain was 71 cases (48.0%), swelling was 19 cases (12.8%) and discomfort was 18 cases (12.2%). 4. The most frequent change of antral floor was indistinct antral floor as 25 cases (13.4%) and elevation of antral floor was 23 cases (12.3%). And the first molar presented the most frequent involvement of antral floor as 47 cases (57.3%). 5. In 156 specialized Orthopantomograms, 101 cases (49.0%) presented apparent increased radiopacity and 72 cases (35.0%) showed suspicious increased radiopacity in comparison with Waters' view. In 187 standard films, 47 cases (25.1%) presented apparent increased radiopacity and 53 cases (28.4%) showed suspicious increased radiopacity in comparison with Waters' views.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.6
• /
• pp.387-395
• /
• 2020

Background: The anterior-middle superior alveolar (AMSA) anesthetic technique has been reported to be a less traumatic alternative to several conventional nerve blocks and local infiltration for anesthesia of the maxillary teeth, their periodontium, and the palate. However, its anatomic basis remains controversial. The present study aimed to determine if the pattern of cortical and cancellous bone density in the maxillary premolar region can provide a rationale for the success of the AMSA anesthetic technique. Method: Cone-beam computed tomography scans of 66 maxillary quadrants from 34 patients (16 men and 18 women) were evaluated using a volumetric imaging software for cortical and cancellous bone densities in three interdental regions between the canine and first molar. Bone density was measured in Hounsfield units (HU) separately for the buccal cortical, palatal cortical, buccal cancellous, and palatal cancellous bones. Mean HU values were compared using the Mann-Whitney U test and one-way ANOVA with post-hoc analysis. Results: Cancellous bone density was significantly lower (P ≤ 0.001) in the palatal half than in the buccal half across all three interdental regions. However, there was no significant difference (P = 0.106) between the buccal and palatal cortical bone densities at the site of AMSA injection. No significant difference was observed between the two genders for any of the evaluated parameters. Conclusions: The palatal half of the cancellous bone had a significantly lower density than the buccal half, which could be a reason for the effective diffusion of the anesthetic solution following a palatal injection during the AMSA anesthetic technique.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.5
• /
• pp.375-379
• /
• 2010

Introduction: In the management of dentofacial deformities, variable movement of the maxilla can be made possible by a Le Fort I osteotomy. Posterior impaction of the maxilla necessary for rotation of the maxillomandibular complex enhances the functions and esthetic results. In cases of posterior impaction of the maxilla, an increase in the figure of the occlusal plane angle and incisor inclination can occur. This study reports the relationship between the amount of posterior impaction and the change in the occlusal plane angle and incisor inclination in a Le Fort I osteotomy by preoperative and postoperative lateral cephalograms. Materials and Methods: Twenty patients who had undergone orthognathic surgery in Dong-A University Medical Center participated in this study. Lateral cephalometrics, within 3 weeks prior to surgery and 3 days after surgery, were used for analysis. Pre and postoperative measurements of the occlusal plane angle and incisal inclination based on the Frankfort horizontal (FH) plane were performed. X and Y were defined as the amount of vertical change in the upper incisor tip and the amount of vertical change in the upper first molar mesial cup tip through the operation. The amount of final posterior maxillary impaction was determined by subtracting Y from X, which is the difference in vertical height. According to the amount of posterior maxillary impaction, the change in the occlusal plane angle and incisal inclination was measured. Results: The average posterior maxillary impaction was 2.91 mm and the average change in the occlusal plane angle and incisal inclination was $6.54^{\circ}$after surgery. As a result, each mm of posterior maxillary impaction changed the occlusal plane angle and incisal inclination by $2.25^{\circ}$. Statistically, there was high significance. Two cases were observed: one with the same amount of posterior maxillary impaction performed on both the right and left showing $2.20^{\circ}$, and the other with a different amount of posterior maxillary impaction performed showing $2.35^{\circ}$. In this case, there was no significance difference between the two cases. Conclusion: Each mm of posterior maxillary impaction changes the occlusal plane angle and incisal inclination by an average of $2.25^{\circ}$. In posterior maxillary impaction, there was no significant difference in the amount of change in the occlusal plane angle and incisal inclination regardless of whether there was an equal amount of posterior maxillary impaction on both sides. This study is expected to help in the presurgical orthodontic preparation and presurgical treatment planning.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.136-142
• /
• 2010

Ectopic eruption is defined as the eruption of the tooth in an abnormal position or orientation. In the molar region, ectopic eruption may cause distal root resorption and premature exfoliation of the neighbor teeth and uncontrolled space loss is followed. Prolonged partial impaction of the permanent molar may also cause undetected caries or abscess formation of the neighbor teeth. While 66% of ectopically erupting permanent molars are corrected spontaneously without treatment, the treatment is necessary for the irreversible ectopic eruption cases. The optimal treatment approach depends on a number of factors including the clinical eruption status of the molar, amount of enamel ledge and the mobility of the neighbor tooth, and the presence of pain or infection. This case report presents the results of treatment of the ectopically erupting maxillary first permanent molars and mandibular second molars using elastic separators or modified Halterman appliance with or without surgical approach.