• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.529-533
• /
• 2006

Supernumerary teeth are defined as an excess in the number of teeth when compared to the normal dental formula. They are more prevalent in the permanent dentition than the primary dentition. Supernumerary teeth can occur in the maxilla, mandible, or both. But the majority are found in the maxilla and most of it is found in the premaxilla region The present cases documents about the uncommon cases of supernumarary teeth on maxillarty premolar area and mandibular incisal area.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.19-27
• /
• 2001

This study was performed to determine the prevalence of hypodontia and hyperdontia of permanent teeth among Korean schoolchildren, and to compare differences in the prevalence between Korea, other country, and other ethnic groups. The sample consisted of 346 girls aged 6.9～0.3 yr and 375 boys aged 6.8～0.4 yr on whom a panoramic radiograph was taken at Yeonchun-Gun community in Korea. The prevalence of congenitally missing teeth (third molars excluded) was 6.7% in boys and somewhat higher, 9.5% in girls, and 8.0% for both sexes combined. On the average, number of missing teeth per affected child was 1.9 teeth. The most commonly congenitally missing teeth were the mandibular second premolar (32.7%), followed by the mandibular incisor (28.7%), the maxillary second premolar (16.7%), and the maxillary lateral incisors (10.2%). The prevalence of supernumerary teeth was 2.1 % in boys, 1.4% in girls, and 1.8% for both sexes combined. The most common supernumerary teeth were the mesiodens (76.9%), followed by the supernumerary premolar (23.1 %). The affected male-female ratio was 1.6: 1.0. The prevalence of congenital missing teeth in this study was similar to in studies of Japanese, Danish, American and German. The frequency of hyperdontia was lower in this study than in studies of Chinese children, Japanese and American.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.56-60
• /
• 2010

Purpose: The sinus lift procedure requires detailed knowledge of maxillary sinus anatomy and the possible anatomical variations. This study evaluated the location and prevalence of maxillary sinus septa using computed tomography (CT). Methods: This study was based on the analysis of CT images for posterior maxilla which were obtained from patients who visited Chonbuk National University Dental Hospital during the period of June 2007 to December 2008. With the exclusion of cases presenting any pathological changes, 236 maxillary sinuses in 204 patients were retrospectively analyzed. The average age of the patients was 50.9. The cases were divided into two groups, an atrophy/edentulous segment and a non-atrophy/dentate segment, and maxillary sinus septa of less than 2.5 mm were not taken in-to consideration. The location of septa was also divided for analysis into 3 regions: the anterior (1st and 2nd premolar), middle (1st and 2nd molar) and posterior (behind 2ndmolar) regions. Results: In 54 (20.9%) of the 204 patients there were pathologic findings, and those patients were excluded from the analysis. Sinus septa were present in 58 (24.6%) of the 236 maxillary sinuses and in 55 (27%) of the 204 total patients. In the atrophy/ edentulous ridge group (148 maxillary sinuses), 41 cases (27.7%) were found, and 17 cases (19.3%) were found in the non-atrophy/ dentulous ridge group (88 maxillary sinuses). In terms of location, septa were found in 18 cases (27.3%) in the anterior, in 33 cases (50%) in the middle and in 15 cases (22.7%) in the posterior regions. Conclusions: In the posterior maxilla, regardless of type of ridge (atrophy/edentulous or non-atrophy/dentate), the anatomical variation of sinus septa is diverse in its prevalence and location. Thus, accurate information on the maxillary sinus of thepatient is essential and should be clearly understood by the surgeon to prevent possible complications during sinus lifting.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.249-259
• /
• 1991

The purpose of this study was to evaluate the incidence and radiographic features of 677 cases of hypercementosis by means of the analysis of full mouth periapical radiograms in 4,236 persons visited the Department of Oral Radiology, School of Dentistry, Kyung Hee University during January 1984 to December 1989. The obtained results were as follows: 1. The incidence of hypercementosis was revealed to be 8.2% in total examined persons, and there was a higher incidence in females (9.4%) than in males (7.1%). 2. The hypercementosis was most frequently occurred in the 6th decades (29.2%), and the incidence was increased by advancing age until 6th decades. 3. There was a higher incidence in the maxilla (59.5%) than in the mandible (40.5%), and maxillary second premolar (18.5%) was the most frequently involved tooth. The maxillary first premolar (11.7%) was next in order to frequency followed by maxillary canine (10.0%) and mandibular first and second premolars (9.6%). 4. In the etiologic factors, 35.0% were inflammation, 31.2% were elongation, 6.2% were trauma from occlusion, 0.1 % were uneruption, and 27.5% were unknown. 5. In the degree of cementum apposition, 35.3% were Type Ⅰ, 29.5% were Type Ⅱ, and 35.2% were Type Ⅲ. 6. In the status of cementum apposition, 3.2% were mesial side, 8.9% were distal side, and 87.9% were mesial & distal side. 7. In the identification of radiographic density between normal cementum and excessive cementum, 12.7% could be identified, and 87.3% could be unidentified.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.533-541
• /
• 1993

This study was designed to help to be given esthetics in construction of denture and prosthodontic rehabilitation of anterior tooth region. The author took the facial straight photograph of 100 old aged people(male 50, female 50) above 55 years of age, who have natural teeth in anterior tooth region, in a resting and a smiling position. And the author measured and analyzed the lip shape, the relation between the lip and the teeth and the change of lip length and height when they were smiling. The results of this study were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 53%, straight was 28% and curved upward was 9%. 2. In the relation between the upper lip and the teeth, average smile was 53% , high smile was 26% and low smile was 21%. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of straight was 54%, the group of parallel was 40% and the group of reverse was 6%. 4. In the relationship between maxillary anterior incisor and lower lip, the group of not-touching was 92%, the group of touching was 5% and the group of the maxillary anterior incisor were slightly covered by the lower lip was 3%. 5. In the teeth displayed in a smile, displayed to second premolar was 50%, displayed to first molar was 34%, displayed to first premolar was 12%, and displayed to canine and second molar were 2%. 6. At smiling, the width of the mouth was 0.94 times of the interpupillary distance and 0.45 times of the full face width. 7. At smiling, the length of the upper lip was 0.73 times and lower lip was 0.98 times of the length in a resting postion and the width of the mouth corner was 1.19 times of the resting position.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2020

PURPOSE. To investigate the influence of crown material (lithium-disilicate, 3Y-TZP zirconia) and abutment type (rigid implant, resin tooth with artificial periodontium) on wear performance of their antagonist teeth and adjacent teeth. MATERIALS AND METHODS. A mandibular left first molar (#36) with adjacent human teeth (mandibular left second premolar: #35, mandibular left second molar: #37) and antagonistic human teeth (maxillary left second premolar: #25, maxillary left first molar: #26, maxillary left second molar: #27) was prepared simulating a section of the jaw. Samples were made with extracted human molars (Reference), crowned implants (Implant), or crowned resin tooth analogues (Tooth). Crowns (tooth #36; n = 16/material) were milled from lithium-disilicate (Li, IPS e.max CAD) or 3Y-TZP zirconia (Zr, IPS e.max ZirCAD, both Ivoclar Vivadent). Thermal cycling and mechanical loading (TCML) in the chewing simulator were applied simulating 15 years of clinical service. Wear traces were analyzed (frequency [n], depth [㎛]) and evaluated using scanning electron pictures. Wear results were compared by one-way-ANOVA and post-hoc-Bonferroni (α = 0.05). RESULTS. After TCML, no visible wear traces were found on Zr. Li showed more wear traces (n = 30-31) than the reference (n = 21). Antagonistic teeth #26 showed more wear traces in contact to both ceramics (n = 27-29) than to the reference (n = 21). Strong wear traces (> 350 ㎛) on antagonists and their adjacent teeth were found only in crowned groups. Abutment type influenced number and depth of wear facets on the antagonistic and adjacent teeth. CONCLUSION. The clinically relevant model with human antagonistic and adjacent teeth allowed for a limited comparison of the wear situation. The total number of wear traces and strong wear on crowns, antagonistic and adjacent teeth were influenced by crown material.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.219-237
• /
• 2003

he purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown, and 0.5mm width chamfer finish lines on the maxillary first premolar. 30 sound maxillary first premolars were selected and then storaged in 5% NaOCl and saline. 15 teeth were performed preparation for each group(1.0mm rounded shoulder, 0.5mm chamfer). After 30 stone dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the natural teeth. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co., Germany)was used to measure the fracture strength, with stress loading on the occlusal surface between buccal and lingual cusp. And also, three-dimensional finite element model was used to measure the stress distribution with two types of the finish lines(1.0mm rounded shoulder, 0.5mm chamfer) and two loading conditions(both buccal and lingual cusp inclination, lingual cusp inclination only). The result of the this study were as follows. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(842N) showed higher value than that of the chamfer(590N) (p<0.05). In the three dimensional finite element analysis of all ceramic crown, metal die and natural teeth model did not show any differences in stress distribution between finish lines. Generally, when force was loaded on the occlusal inclination of buccal and lingual cusp, the stress was concentrated on the loading point and the central groove of occlusal surface. When force was loaded only on the occlusal inclination of lingual cusp, the stress was concentrated on the lingual finish line and loading point.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.3
• /
• pp.187-192
• /
• 2019

PURPOSE. The purpose of this in vitro study was to investigate the fracture loads and modes of failure for the full range of natural teeth under simulated occlusal loading. MATERIALS AND METHODS. One hundred and forty natural teeth were taken from mandibles and maxillas of patients. There were 14 groups of teeth with 10 teeth in each group (5 males and 5 females). Each specimen was embedded in resin and mounted on a positioning jig, with the long axis of the tooth at an inclined angle of 30 degrees. A universal testing machine was used to measure the compression load at which fracture of the tooth specimen occurred; loads were applied on the incisal edge and/or functional cusp. RESULTS. The mean fracture load for the mandibular first premolar was the highest (2002 N) of all the types of teeth, while the mean fracture load for the maxillary first premolar was the lowest (525 N). Mean fracture loads for the mandibular and maxillary incisors, and the first and second maxillary premolars, had significantly lower values compared to the other types of teeth. The mean fracture load for the teeth from males was significantly greater than that for the teeth from females. There was an inverse relationship between age and mean fracture load, in which older teeth had lower fracture loads compared to younger teeth. CONCLUSION. The mean fracture loads for natural teeth were significantly different, with dependence on tooth position and the sex and age of the individual.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.4
• /
• pp.213-220
• /
• 2023

Background: Third molar extraction is the most commonly performed minor oral surgical procedure in outpatient settings and requires regional anesthesia for pain control. Extraction of the maxillary molars commonly requires both posterior superior alveolar nerve block (PSANB) and greater palatine nerve block (GPNB), depending on the nerve innervations of the subject teeth. We aimed to study the effectiveness of PSANB alone in maxillary third molar (MTM) extraction. Methods: A sample size comprising 100 erupted and semi-erupted MTM was selected and subjected to study for extraction. Under strict aseptic conditions, the patients were subjected to the classical local anesthesia technique of PSANB alone with 2% lignocaine hydrochloride and adrenaline 1:80,000. After a latency period of 10 min, objective assessment of the buccal and palatal mucosa was performed. A numerical rating scale and visual analog scale were used. Results: In the post-latency period of 10 min, the depth of anesthesia obtained in our sample on the buccal side extended from the maxillary tuberosity posteriorly to the mesial of the first premolar (15%), second premolar (41%), and first molar (44%). This inferred that anesthesia was effectively high until the first molars and was less effective further anteriorly due to nerve innervation. The depth of anesthesia on the palatal aspect was up to the first molar (33%), second molar (67%), and lateromedially; 6% of the patients received anesthesia only to the alveolar region, whereas 66% received up to 1.5 cm to the mid-palatal raphe. In 5% of the cases, regional anesthesia was re-administered. An additional 1.8 ml PSANB was required in four patients, and another patient was administered a GPNB in addition to the PSANB during the time of extraction and elevation. Conclusion: The results of our study emphasize that PSANB alone is sufficient for the extraction of MTM in most cases, thereby obviating the need for poorly tolerated palatal injections.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.278-283
• /
• 2017

Purpose: The aim of this study was to evaluate the interdental distances of anterior, premolar, and molar teeth at the cementoenamel junction (CEJ) and 2 mm below the CEJ in healthy natural dentition with cone-beam computerized tomography (cone-beam CT) in order to provide valuable data for ideal implant positioning relative to mesiodistal bone dimensions. Materials and Methods: Two hundred patients who visited Dental Hospital, Wonkwang University, who had natural dentition with healthy interdental papillae, and who underwent cone-beam CT were selected. The cone-beam CT images were converted to digital imaging and communication in medicine (DICOM) files and reconstructed in three-dimensional images. To standardize the cone-beam CT images, head reorientation was performed. All of the measurements were determined on the reconstructed panoramic images by three professionally trained dentists. Results: At the CEJ, the mean maxillary interdental distances were 1.84 mm (anterior teeth), 2.07 mm (premolar), and 2.08 mm (molar), and the mean mandibular interproximal distances were 1.55 mm (anterior teeth), 2.20 mm (premolar), and 2.36 mm (molar). At 2mm below the CEJ, the mean maxillary interdental distances were 2.19 mm (anterior teeth), 2.51 mm (premolar), and 2.60 mm (molar), and the mean mandibular interproximal distances were 1.86 mm (anterior teeth), 2.53 mm (premolar), and 3.01 mm (molar). Conclusion: The interdental distances in the natural dentition were larger at the posterior teeth than at the anterior teeth and also at 2 mm below the CEJ level compared with at the CEJ level. The distances between mandibular incisors were the narrowest and the distances between mandibular molars were the widest in the entire dentition.