• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.92-101
• /
• 2008

The purpose of this study was to investigate the dental caries prevalence and occlusion pattern of children with deciduous dentition in Chonnam seashore area. Two thousand two hundred seventy two kindergarten children ranged 3 to 5 years of age were examined. The obtained results were as follows : 1. The rate of children with caries experience(dmf rate) in deciduous teeth was 66.8% at 3 years of age, 77.7% at 4 years of age, and 83.5% at 5 years of age and showed no significant gender differences(p>0.05). 2. The mean number of decayed, missing, filled deciduous teeth(dmft index) was 3.62 at 3 years of age, 4.73 at 4 years of age, and 5.96 at 5 years of age and showed no significant gender differences(p>0.05). 3. Most of the caries-prevailed tooth was mandibular 2nd primary molar and showed 39.48% at 3 years of age, 49.73% at 4 years of age, and 63.85% at 5 years of age. 4. The caries-experienced teeth in order were as follows : mandibular 2nd primary molar with 52.34%, mandibular 1st primary molar with 45.61%, maxillary 2nd primary molar with 38.81%, and maxillary primary central incisor with 38.86%, respectively. 5. In sagittal primary molar relationship, Class 1 occlusion pattern was 53.26%, Class 2 pattern was 1.41% and Class 3 pattern was 30.02%, respectively. Right Class 2 and Left Class 3 pattern was not observed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.1
• /
• pp.16-22
• /
• 2014

Purpose: The purpose of this study was to assess the marginal and mesial fitness of zirconia single copings and 3-unit fixed partial dentures (FPDs) manufactured with an identical model. Materials and Methods: An epoxy model in which the maxillary right 2nd premolar is lost and maxillary 1st premolar and 2nd molar are formed as abutments was manufactured and scanned by using a laser scanner. A ten units of zirconia single copings were manufactured for maxillary 1st premolar and 2nd molar, respectively and the same number of 3-unit FPDs were manufactured. For the measurements of fitness, the manufactured silicone replicas were divided into four parts and the fitness were measured by digital microscope at measurement points (P1, P2, P3, P4 and P5) of each plane. The measured gaps were classified into three categories: marginal gap (MG, P1), axial gap (AG, average of P2 and P3), occlusal gap (OG, average of P4 and P5). Results: The ranges of MG, AG and OG for single copings were 18.47 - 40.54 ${\mu}m$, 39.73 - 73.61 ${\mu}m$ and 116.90 - 134.69 ${\mu}m$, respectively. The ranges of MG, AG and OG for 3-unit FPDs were 45.95 - 87.44 ${\mu}m$, 23.78 - 57.00 ${\mu}m$ and 99.89 - 131.06 ${\mu}m$, respectively. Conclusion: The result of the study shows that the MGs for 3-unit FPDs were higher than those of single copings, though they are within the range of clinical acceptance, indicating that the use of more homogeneous zirconia block and modification of sintering processes are needed to ensure the prevention of increase of gap in 3-unit FPDs.

• The korean journal of orthodontics
• /
• v.40 no.6
• /
• pp.373-382
• /
• 2010

Objective: The purpose of this study was to assess the dentoalveolar compensation in facial asymmetry individuals using an integration of a CBCT image and a laser scanned dental cast image. Methods: The subjects consisted of 30 adults with asymmetric mandibles and 20 adults with symmetric mandibles. The CBCT and laser scanned dental cast images were integrated with a registration technique. Canine and first molar position and angulation were assessed from reference coordinates. The differences between deviated and non-deviated sides were analyzed with the paired t-test. The differences shown according to menton deviation were also statistically analyzed using Pearson correlation analysis. Results: The experimental group showed deviated and non-deviated side differences (dev.-ndev.) in the position and angle of the canine and first molars. Menton deviation showed positive correlation with the deviation side (dev.-ndev.) for the maxillary and mandibular 1st molar angles, negative correlation with the deviation side for the vertical position of the maxillary 1st molars, transverse position of the mandibular canine, transverse position and vertical position of the mesio-lingual cusp of the mandibular 1st molars. Conclusions: The upper and lower canine and first molars of facial asymmetry individuals were compensated, so the transverse position, vertical position, and angle showed differences between the deviated/non-deviated sides.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.488-495
• /
• 2001

Treatment of class II malocclusions require distalization of maxillary molars into class I relationship. Intraarch distal molar movement techniques have recently assumed an important role in young patients. In this study, the dental and skeletal effects of the pendulum appliance were evaluated by means of cephalometric radiographs. The samples were consisted of 19 patients: 11 females and 8 males, mean age $11.68{\pm}1.52$ years. Measurements were obtained from cephalometric prior to and the day of removal of the pendulum appliance. Treatment changes were analyzed. The following results were obtain. 1. The pendulum appliance produced $2.94{\pm}1.54mm$ distal molar movement with a mean intrusion of $1.17{\pm}0.97mm$, mean period $18.13{\pm}7.95$ weeks. 2. The anchor tooth was $1.34{\pm}1.40mm$ forward movement and $0.48{\pm}0.99mm$ extrusion, and labial tilting of incisors. 3. The angle between palatal plane and mandibular plane increased significantly. 4. There was no significant difference in according to 2nd molar position. 5. Total movement was consisted of 74% distal movement of 1st molar and 26% forward movement of the anchor tooth.

• Journal of Periodontal and Implant Science
• /
• v.27 no.3
• /
• pp.443-457
• /
• 1997

The purpose of this study was to evaluate the effects of ethanolic extracts of Scutellaria Radix on the alveolar bone formation in the extract socket of rat. Thirty-six Sprague-dawley rats were used in this study. Mean body weight of rat was $130{\pm}5g$. Experimental animal were administered 0.4% ,${\beta}-aminopropionitril$(Sigma, USA) with the solid commercial food for 5 days. All the maxillary 1st molar of the rats were extracted by using of the tissue forcep under the general anesthesia with Pentobarbital sodium(Tokyo Chemical Co, Japan) injection into intraperitoneal space. All the extracted rats were divided into two group, experimental group which were feeded the solid food mixed ethanolic extracts of Scutellaria Radix, and control group which were feeded same food without reagent. At 1, 3, 5, 7, 9 and 14th days after tooth extraction, rats in both groups were serially sacrificed respectively. All the specimen were treated as usual method and prepared Hematoxylin-eosin stain for the light microscopic observation. The results were as follows : 1. Bone formation of extracted socket starts from the area on remained periodontal ligament than other area. 2. In the case of administration of the extracted Scutellaria Radix showed rapid healing process of connective tissue than non-administrated group. 3. In the case of administration of the extracted Scutellaria Radixshowed rapid osteogenesis than non-administrated With above results, it was concluded that ethanolic extracts of Scutellaria Radix may play a favorable role on the healing process of exatraction socket after extraction in rats. It was suggested that further study to evaluate the different concentration and administration method of ethanolic extracts of the Scutellaria Radix into same experimental model.

• The korean journal of orthodontics
• /
• v.41 no.6
• /
• pp.423-430
• /
• 2011

Objective: To evaluate the extent and aspect of stress to the cortical bone after application of a lateral force to a two-component orthodontic mini-implant (OMI, mini-implant) by using three-dimensional finite element analysis (FEA). Methods: The 3D-finite element models consisted of the maxilla, maxillary first molars, second premolars, and OMIs. The screw part of the OMI had a diameter of 1.8 mm and length of 8.5 mm and was placed between the roots of the upper second premolar and the first molar. The cortical bone thickness was set to 1 mm. The head part of the OMI was available in 3 sizes: 1 mm, 2 mm, and 3 mm. After a 2 N lateral force was applied to the center of the head part, the stress distribution and magnitude were analyzed using FEA. Results: When the head part of the OMI was friction fitted (tapped into place) into the inserted screw part, the stress was uniformly distributed over the surface where the head part was inserted. The extent of the minimum principal stress suggested that the length of the head part was proportionate with the amount of stress to the cortical bone; the stress varied between 10.84 and 15.33 MPa. Conclusions: These results suggest that the stress level at the cortical bone around the OMI does not have a detrimental influence on physiologic bone remodeling.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.14 no.4
• /
• pp.275-282
• /
• 1992

Maxillofacial war injures is specific representative of severe hard and soft tissue defect. This type of injuries were different from the trauma because it may be fatal. The purpose of this study was to evaluate the injury type base on the retrograde medical record in the 104 patients from Feb. 1991 to Aug. 1992 in Korea Veterans Hospital. The obtained results were as follows. 1. Among 104 cases, 51 cases(49.0%) were classified as mandibular defects only, and 53 cases (51.0%) were classified as maxillary with mandibular defect (combined). 2. The etiologic factors of injury were gunshot, artillery and grenade or shell: 33 cases, 14cases, and 10 cases respectively in Korea War, 19 cases, 5 cases, and 8 cases respectively in Vietnam War. 3. In 57 cases of mandibular partial defect, the angle area showed the highest frequencies, 18 cases(31.6%). 4. In 42 cases of mandibular segmental defect, the area between the 1st molar and the ascending ramus showed the highest frequencies. 17 cases(40.4%), and almost all cases were unilateral defect (40 cases, 95.0%) 5. Reconstruction method performed for segmental mandibular defect were wire or plate(15 cases, 35.7%) and soft tissue closure only(12 cases, 28.7%), respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.437-448
• /
• 2021

The purpose of this study is to analyze morphological characteristics of maxillary primary molar's root and root canal. 268 children aged 3 - 7 years (175 boys, 93 girls) who had CBCT (152 children) and 3D CT (116 children) taken in Seoul National University Dental Hospital from January 2006 to April 2020 were included. The number of roots and root canals were analyzed in 1002 teeth without any root resorption or periapical pathologies. Curvature, angulation, length of root and root canal, as well as cross-sectional shapes of the root canal were analyzed in 218 teeth. By using Mimics and 3-Matics software, volume, surface area, and volume ratio of root canal was analyzed in 48 teeth. More than half of maxillary primary molars have 3 roots and 3 root canals. The degree of symmetry of root canal type was about 0.63 (Cohen's kappa coefficient). The most frequent shape of roots and canals was linear in 1^st primary molars and curved in 2^nd primary molars. Angulation, length of root and root canals was the largest on palatal roots. Most teeth showed ovoid or round shapes at apex. The largest root canal volume, surface area, volume ratio was found in the palatal roots.

• The korean journal of orthodontics
• /
• v.47 no.6
• /
• pp.375-383
• /
• 2017

Objective: The purpose of this study was to evaluate the dental and skeletal effects of the modified C-palatal plate (MCPP) for total arch distalization in adult patients with Class II malocclusion and compare the findings with those of cervical pull headgear. Methods: The study sample consisted of the lateral cephalograms of 44 adult patients with Class II Division 1 malocclusion, including 22 who received treatment with MCPP (age, $24.7{\pm}7.7years$) and 22 who received treatment with cervical pull headgear (age, $23.0{\pm}7.7years$). Pre- (T1) and post-treatment (T2) cephalograms were analyzed for 24 linear and angular measurements. Multivariate analysis of variance was performed to evaluate the changes after treatment in each group and differences in treatment effects between the two groups. Results: The mean amount of distalization at the crown and root levels of the maxillary first molar and the amount of distal tipping was 4.2 mm, 3.5 mm, and $3.9^{\circ}$ in the MCPP group, and 2.3 mm, 0.6 mm, and $8.6^{\circ}$ in the headgear group, respectively. In addition, intrusion by 2.5 mm was observed in the MCPP group. In both groups, the distal movement of the upper lip and the increase in the nasolabial angle were statistically significant (p < 0.001). However, none of the skeletal and soft tissue variables exhibited significant differences between the two groups. Conclusions: The results of this study suggest that MCPP is an effective treatment modality for total arch distalization in adults.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.585-597
• /
• 1997

The purpose of this study was to evaluate the effect of estrogen on the periodontium and alveolar bone tissue response during experimental tooth movement in ovariectomized rats. Eighty female rats, 250gm in body weight, were classified into four groups ; sham operated group(NN), ovariectomized group(ON), ovariectomized & estrogen injected group(OE), sham operated & estrogen injected group(NE). flats were ovariectomized before 3 weeks to begin the experiment, which resulted in estrogen-deficient osteoporosis. In OE group & NE group, estrogen was injected $50{\mu}g/kg\;B.W.$ every other days. The left maxillary 1st molar was moved mesially with 60g force. Each foot rats were sacrificed after 1, 3, 7, 15 days from application of orthodontic appliance and alter additional 7 days from removal of orthodontic appliance. Histological findings on mesial roots of upper 1st molar in pressure and tension side are observed. The results were summarized as follows ; 1. In pressure side of alveolar bone, the number of osteoclasts and Howship's lacuna of ON group was significantly more than that of NN group from 1 day to 15 days(P<0.05). Especially the number of Howship's lacuna of ON group was significantly more than that of OE group during all experimental period(P<0.05). 2. In tension side of alveolar tune, the number of osteoclasts of ON group was significantly increased from 1 day to 3 days and decreased after 7 days. But the number of osteoclast of ON group was significantly mote than that of NN group during all experimental period(P<0.05). Also the number of Howship's lacuna of all groups was abruptly increased at 1 day, but slowly decreased till experimental 15 days. And the number of Howship's lacuna of of group was significantly more than that of NN group from 0 hr to 7 days(P<0.05). 3. The speed of tooth movement of OE group & NE group was similar to that of NN group(P>0.05). The amount of tooth movement of ON group between 7 days and 15 days was significantly greater than those of other groups(P<0.05). 4. The degree of relapse of ON group after 7 days from removal of orthodontic appliance was similar to those of other groups(P>0.05).