• 한국지능시스템학회논문지
• /
• 제14권6호
• /
• pp.776-782
• /
• 2004

Generally, Max-Min CRI (Compositional Rule of Inference ) method by Zadeh and Mamdani is used in the conventional fuzzy inference. However, owing to the problems of Max-Min CRI method, the inference often results in significant error regions specifying the difference between the desired outputs and the inferred outputs. In this paper, I propose a New Max-Min CRI method which can solve some problems of the conventional Max-Min CRI method. And then this method is simulated in a D.C.series motor, which is a bench marking system in control systems, and showed that the new method performs better than the other fuzzy inference methods.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.130-136
• /
• 2005

This paper presents an optimal design and the performance evaluation of two-axis nano positioning stage with round notched flexure hinges. A flexure hinge mechanism with round notched flexure hinges is to guide the linear motions of a moving plate in the nano positioning stage. A Min-Max algorithm is applied to the design of the flexure hinge mechanism for nano positioning stage. In the design process, the structure of the flexure hinge mechanism is fixed, then the radius of a round hole and the width of two round holes are chosen as design variables, and finally the do sign variables are calculated by the Min-Max algorithm. The machined flexure hinge mechanism, stack type PZTs for actuation and capacitance type displacement sensors for position measurement are assembled into the nano positioning stage. The experimental results of the manufactured nano positioning stage show the first modal resonance frequency of 197 Hz, the operating range of 40 um, and the resolution of 3 nm.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.1-10
• /
• 1998

Testing high reliability devices under nomal operating condition is difficult, because the devices are not likely to fail in the relatively short time available for tests. For most applications it is necessary to accelerate the causes of failure by increasing a stress above its nomal value. Previous accelerated life test(ALT) plans have shown how to find optimum allocation, lowest stress and sample size subject to minimizing the variance of mean life estimator. In these ALT plans, the highest acceptable test-stress was assumed to be specified in advance by the experimenter but there is no guidance for selecting it. This assumption is, however, inappropriate for many applications. Testing devices at too-high stress levels can invalidate the extrapolation model, or introduce failure mechanisms that are not anticipated under nomal operating conditions. In this paper, we propose new 4:2:1 compromise plans using Min-Max method to minimize this risk and present minimized test-stress levels(max, middle, min), and find sample allocation based on Min-Max 4:2:1 compromise plans. In result, we compare previous 4:2:1 compromise plans specified maximum test-stress with Min-Max 4:2:1 compromise plans minimized maximum test-stress.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.968-979
• /
• 2019

Recently, there has been increased interest in the study of multiphase machines due to their higher fault-tolerant capability when compared to their conventional three-phase counterparts. For six-phase machines, stator windings configured with a single isolated neutral (1N) provide significantly more post-fault torque/power than two isolated neutrals (2N). Hence, this configuration is preferred in applications where post-fault performance is critical. It is well known that min-max injection has been commonly used for three-phase and multiphase machines in healthy condition to maximize the modulation limit. However, there is a lack of discussion on min-max injection for post-fault condition. Furthermore, the effects in terms of the common-mode voltage (CMV) in modulating signals has not been discussed. This paper investigates the effect of min-max injection in post fault-tolerant control on the voltage and speed limit of a symmetrical six-phase induction machine with single isolated neutral. It is shown that the min-max injection can minimize the amplitude of reference voltage, which maximizes the modulation index and post-fault speed of the machine. This in turn results in a higher post-fault power.

• Tuberculosis and Respiratory Diseases
• /
• 제42권6호
• /
• pp.900-912
• /
• 1995

연구배경: 최대운동부하 검사는 심폐기능의 종합적인 평가를 위하여 널리 이용되고 있으나 아직 우리나라에는 최대운동시의 호흡성 가스교환이나 폐기능의 정상치가 제대로 확립되어 있지 않은 설정이다. 본 연구의 목적은 한국성인에서 최대운동시의 이들 지표의 연령과 성별에 따른 정상치 내지 참고치를 마련하는 동시에 이들 중 일부지표의 추정정상치를 산출하는 회귀방정식을 구하는데 있다. 방법: 건강한 성인 남성 603명, 여성 397명, 합계 1,000명(20~66세)을 대상으로 Bruce법으로 증상제한성 최대운동부하 검사를 실시하였으며, 이중 885명에서는 VC, $FEV_1$ 및 MVV도 측정하였다 대상자들은 모두 전문체육인이 아닌 스포츠센터의 회원이었으며, 운동부하검사 중에는 안전상의 문제 때문에 부득이 트레드밀의 손잡이를 잡는 것을 허용하였다. 곁과: $VO_2\;max/m^2$, $VCO_2\;max/m^2$ 및 VE max/$m^2$는 모두 남성에서 뚜렷이 컸으며, 남녀에서 모두 연령의 증가에 따라 감소하였다. 한편 RR max는 성별에 따른 차이는 없었으나, 연령의 증가에 따라 약간씩 감소하였으며, $V_T$ max는 남성에서 월등히 많았으나 남녀에서 다같이 연령에 따른 일정한 경향의 변화는 없었다. 그리고 $V_T$ max/VC, $V_E$ max/MVV 및 BR의 평균은 최대운동시에 나이가 많은 여성에서도 상당한 환기예비가 있음을 보여주었다. 저자들은 성적을 토대로 운동시간(분), 나이(세), 시장(cm), 체중(kg), 성별(남=0, 여=1), VC(L), $FEV_1$(L) 및 VE max(L) 등을 변수로 해서 구한 주요 지표들의 회귀방정식은 다음과 같다. $VO_2\;max/m^2(L/min)=1.449+0.073{\times}$운동시간-$0.007{\times}$연령+$0.010{\times}$체중-$0.006{\times}$신장-$0.209{\times}$성별, $VCO_2\;max/m^2(L/min)=1.672+0.063{\times}$운동시간-$0.008{\times}$연령+$0.010{\times}$체중-$0.005{\times}$신장-$0.319{\times}$성별, $V_E\;max/m^2(L/min)=58.161+1.503{\times}$운동시간-$0.315{\times}$연령-$9.871{\times}$성별 또는 $V_E\;max/m^2(L/min)=47.873+6.458{\times}FEV_1-5.715{\times}$성별 및 $V_T\;max(L)=1.497+0.223{\times}VC-0.493{\times}$성별. 결론: 본 연구에서 얻은 최대운동시의 호흡성 가스 교환 및 환기기능에 관한 성적은 건강과 체력에 대해서 일반인보다 관심이 높을 것으로 생각되는 스포츠센터 회원들을 대상으로 한 것이기 때문에, 안전상의 문제로 트레드밀의 손잡이를 잡고 검사를 해야하는 환자나 건강인을 위한 이상적인 목표치 내지 정상치를 제공한 것으로 생각된다. Background: Although graded exercise stress tests are widely used for the evaluation of cardiorespiratory performance, normal standards on respiratory gas exchange and ventilatory functions at maximal exercise in Koreans have not been well established. The purpose of this study is to provide reference values on these by sex and age, along with derivation of some of their prediction equations. Method: Symptom-limited maximal exercise test was carried out by Bruce protocol in 1,000 healthy adults consisting of 603 males and 397 females, aged 20~66 years. Among them VC, $FEV_1$ and MVV were also determined in 885 cases. All the subjects were members of a health center, excluding athletes. During the exercise, subjects were allowed to hold on to front hand rail of the treadmill for safety purpose. Results: The $VO_2\;max/m^2$, $VCO_2\;max/m^2$ and $V_E\;max/m^2$ were greater in males than in females and decreased with age. The RR max in men and women was similar but decreased slightly with age. The $V_T$ max was markedly greater in men but showed no significant changes with age in either gender. The mean of $V_T$ max/VC, $V_E$ max/MVV and BR revealed that there were considerable ventilatory reserves at maximal exercise even in older females. The regression equations of the cardinal parameters obtained using exercise time(ET, min), age(A, yr), height(Ht, cm), weight(W, kg), sex(S, 0=male; 1=female), VC(L), $FEV_1$(L) and $V_E$ max(L) as variables are as follows: $VO_2\;max/m^2$(L/min)=1.449+0.073 ET-0.007A+0.010W-0.006Ht-0.209S, $VCO_2\;max/m^2$(L/min)=1.672+0.063ET-0.008A+0.010W-0.005Ht-0.319S, VE max/$m^2$(L/min)=58.161+1.503ET-0.315A-9.871S or VE max/$m^2$(L/min)=47.873+6.548 $FEV_1$-5.715 S, and VT max(L)=1.497+0.223VC-0.493S. Conclusion: Respiratory gas exchange and ventilatory variables at maximal exercise were studied in 1,000 non-athletes by Bruce protocol. During exercise, the subjects were allowed to hold on to hand rail of the treadmill for safety purpose. We feel that our results would provide ideal target values for patients and healthy individuals to be achieved, since our study subjects were members of a health center whose physical fitness levels were presumably higher than ordinary population.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제12권4호
• /
• pp.253-274
• /
• 2005

An additive regular Semiring S is left inversive if the Set E+ (S) of all additive idempotents is left regular. The set LC(S) of all left inversive semiring congruences on an additive regular semiring S is a lattice. The relations $\theta$ and k (resp.), induced by tr. and ker (resp.), are congruences on LC(S) and each $\theta$-class p$\theta$ (resp. each k-class pk) is a complete modular sublattice with $p_{min}$ and $p_{max}$ (resp. With $p^{min}$ and $p^{max}$), as the least and greatest elements. $p_{min},\;p_{max},\;p^{min}$ and $p^{max}$, in particular ${\epsilon}_{max}$, the maximum additive idempotent separating congruence has been characterized explicitly. A semiring is quasi-inversive if and only if it is a subdirect product of a left inversive and a right inversive semiring.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.269-276
• /
• 2009

The local preconditioning method has both robust convergence and accurate solutions by using local flow properties for parameters in the preconditioning matrix. Preconditioning methods have been very effective to low speed inviscid flows. In the viscous and turbulent flows, deterioration of convergence should be overcame on the high aspect ratio grids to get better convergence and accuracy. In the present study, the local time stepping and min-CFL/max-VNN definitions are applied to compare the results and we propose the method that switches between two methods. The min-CFL definition is applied for inviscid flow problems and the min-CFL/max-VNN definition is implemented to viscous and turbulent flow problems.

• 한국컴퓨터정보학회논문지
• /
• 제19권9호
• /
• pp.33-38
• /
• 2014

FCM 기반하이브리드 RBF 네트워크는 서로 다른 학습 구조가 결합된 혼합형 모델로서, 입력층과 중간층의 학습 구조는 FCM 알고리즘을 적용하고, 중간층과 출력층 사이의 학습 구조는 Max_Min 알고리즘을 적용한다. 입력층과 중간층의 학습시 입력 벡터와 중간층의 노드 중에서 중심과 입력 벡터간의 가장 가까운 노드를 승자 노드로 선택하여 출력층으로 전달한다. 그리고 중간층과 출력층 사이의 학습구조인 Max_Min 신경망은 중간층의 승자 뉴런이 입력벡터로 적용된다. 그러나 많은 패턴이 입력벡터로 제시될 경우에는 학습성능이 저하되는 단점이 있다. 따라서 본 논문에서는 중간층과 출력층의 학습 구조인 Max_Min 알고리즘의 학습 성능을 향상시키기 위해 퍼지 논리 시스템을 이용한 학습률 자동 조정 방법을 제안한다. 제안된 방법은 목표값과 출력값의 차이에 대한 절대값이 0.1보다 적거나 같으면 정확성으로 분류하고 크면 부정확성으로 분류한다. 정확성의 총 개수를 퍼지 제어 시스템에 적용하여 학습률을 동적으로 조정한다. 제안된 방법의 학습 및 인식 성능을 평가하기 위해 컨테이너에서 추출한 숫자, 영문 식별자를 인식 및 성능평가 실험에 적용한 결과, 제안된 방법이 문자 패턴 인식에 효과적임을 확인할 수 있었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.26-31
• /
• 2009

This study was analysed influence of urban higher temperature in Busan about time series analysis of AWS data. The results are as follows. (1) The temperature of Busan show min $13.2^{\circ}C$ ~max $15.8^{\circ}C$ by 50 years, it is on the rise. (2) The seasonal adjustment series, summer appeared min $17.5^{\circ}C$ ~max $28.9^{\circ}C$ with primitive series similarly. The winter was min $-11.4^{\circ}C$ ~max $17.9^{\circ}C$, the minimum temperature was more lowly than primitive series and maximum temperature was more higher than primitive series. The results, seasonal adjustment series is guessed with influence difference urban structural element beside seasonal factor. (3) Regional analytical result, January appeared with range of min 28% ~max 196% of the seasonal factor and August appeared min 90% ~ max 106%. One of the case which is of 100% or more of the seasonal factor January 12nd~17th, August appears at the 15~17th.

• 오토저널
• /
• 제15권1호
• /
• pp.81-88
• /
• 1993

A direct treatment of the min-max type objective function of the dynamic response optimization problem is proposed. Previously, the min-max type objective function was transformed to an artificial design variable and an additional point-wise state variable constraint function was imposed, which increased the complexity of the optimization problem. Especially, the design sensitivity analysis for the augmented Lagrangian functional with the suggested treatment is established by using the adjoint variable method and a computer program to implement the proposed algorithm is developed. The optimization result of the proposed treatment are obtained for three typical problems and compared with those of the previous treatment. It is concluded that the suggested treatment in much more efficient in the computational effort than the previous treatment with giving the similar optimal solutions.