• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.337-344
• /
• 2014

While implicit integration methods such as Newton's method have excellent stability for the analysis of stiff and constrained mechanical systems, they have the drawback that the evaluation and LU-factorization of the system Jacobian matrix required at every time step are time-consuming. This paper proposes a Jacobian update-free Newton's method in order to overcome these defects. Because the motions of all bodies in a vehicle model are limited with respect to the chassis body, the equations are formulated with respect to the moving chassis-body reference frame instead of the fixed inertial reference frame. This makes the system Jacobian remain nearly constant, and thus allows the Newton's method to be free from the Jacobian update. Consequently, the proposed method significantly decreases the computational cost of the vehicle dynamic simulation. This paper provides detailed generalized formulation procedures for the equations of motion, constraint equations, and generalized forces of the proposed method.

• 한국소음진동공학회논문집
• /
• 제18권6호
• /
• pp.598-605
• /
• 2008

An improved beamforming method is proposed to measure the surface impedance of absorbing materials in a free field. It is possible to estimate the surface impedance by decomposing measured signals into incident and reflected signals by using the spatial filter matrix of the beamforming method. Wavelet do-noising techniques which reduce the white Gaussian noise are applied to improve the results. Phase calibration method is also used to improve the results of the measured surface impedance in a low frequency range. The results of the normal incidence experiments that are performed in a semi-anechoic chamber are verified by comparing with those of the standard test method that is presented in ASTM E1050. The proposed method is found to be reliable to measure the surface impedance for frequencies higher than 400 Hz.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.577-593
• /
• 2014

An exact dynamic stiffness method is introduced for investigating the free vibration characteristics of the steel-concrete composite beams consisting of a reinforced concrete slab and a steel beam which are connected by using the stud connectors. The elementary beam theory is used to define the dynamic behaviors of the two beams and the relative transverse deformation of the connectors is included in the formulation. The dynamic stiffness matrix is formulated from the exact analytical solutions of the governing differential equations of the composite beams in undamped free vibration. The application of the derived dynamic stiffness matrix is illustrated to predict the natural frequencies and mode shapes of the steel-concrete composite beams with seven boundary conditions. The present results are compared to the available solutions in the literature whenever possible.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.33-54
• /
• 2020

The aim of this study is to calculate natural frequencies and harmonic responses of cracked frames with general boundary conditions by using transfer matrix method (TMM). The TMM is a straightforward technique to obtain harmonic responses and natural frequencies of frame structures as the method is based on constructing a relationship between state vectors of two ends of structure by a chain multiplication procedure. A single variable shear deformation theory (SVSDT) is applied, as well as, Timoshenko beam theory (TBT) and Euler-Bernoulli beam theory (EBT) for comparison purposes. Firstly, free vibration analysis of intact and cracked frames are performed for different crack ratios using TMM. The crack is modelled by means of a linear rotational spring that divides frame members into segments. The results are verified by experimental data and finite element method (FEM) solutions. The harmonic response curves that represent resonant and anti-resonant frequencies directly are plotted for various crack lengths. It is seen that the TMM can be used effectively for harmonic response analysis of cracked frames as well as natural frequencies calculation. The results imply that the SVSDT is an efficient alternative for investigation of cracked frame vibrations especially with thick frame members. Moreover, EBT results can easily be obtained by ignoring shear deformation related terms from governing equation of motion of SVSDT.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.956-966
• /
• 1997

단일 스테이지 스위칭 구조를 갖는 홀로그래픽 크로스바에 의한 동적인 자유공간 광연결을 실험하였다. 동적인 동작을 위해 전기적인 주소지정방식의 액정 공간광변조기와 회절격자가 매트릭스-매트릭스 크로스바에서의 고정적인 홀로그램을 대신하여 사용되었다. 회절격자는 규칙적인 셀들로 이루어졌으며 각 셀마다 서로 다른 위상지연 정도를 갖는다. 이러한 화소형 위상격자 배열을 공간광변조기에 띄어 입력빔의 방향으로 편향시키거나 여러 빔으로 분리한 후 원하는 위치로 빔의 방향을 조종한다. 이러한 실험결과 컴퓨터와 공간광변조기, 위상형 회절격자를 이용하여 자유공간 광연결이 동적으로 수행됨을 보였다.

• 대한화장품학회지
• /
• 제28권1호
• /
• pp.71-79
• /
• 2002

In the aged skin especially in the face and eyelid, deep and slight wrinkles are one of the remarkable phenomena of aging and the cause of wrinkle is various. Among the cause of wrinkles an oxidative stress plays an important roles in wrinkle formation process. It caused the lipid peroxidation of cell membrane, the increase of the MMPs(MatrixMetalloProteinase) gene expression and cellular DNA damage. These ROS induced materials may cause the degradation of collagen matrix system in the dermis and cause the formation of skin wrinkle. So, it is very important for protecting skin wrinkle formation to regulate ROS activity. In this study, we developed one active ingredient having multi functional activities such as activation of collagen synthesis, inhibition of MMPs activity, lipid peroxidation and free radical scavenging activity and inhibition of free radical induced DNA damage in vitro. Pericarpium castaneae extracts showed collagen synthesis increase in Normal Human Fibroblast and the inhibition of elastase activity (IC$\_$50/ of Elastase: 43.9$\mu\textrm{g}$/㎖). It showed also anti-oxidative activity (IC$\_$50/ : 48$\mu\textrm{g}$/㎖) and free radical scavenging activity(IC$\_$50/: 7.6$\mu\textrm{g}$/㎖). Conclusively, Pericarpium castaneae extracts may be used as an ingredient for new anti-wrinkle cosmetics.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.343-353
• /
• 2020

Based on the Precise Transfer Matrix Method (PTMM), the dynamic model is constructed to observe the vibration behaviour of cylindrical shells with variable thickness by solving a set of first-order differential equations. The free vibration of stiffened cylindrical shells with variable thickness can be obtained to compare with the exact solution and FEM results. The reliability of the present method of free vibration is well proved. Furthermore, the effect of thickness on the vibration responses of the cylindrical shell is also discussed. The acoustic response of immersed cylindrical shells is analyzed by a Pluralized Wave Superposition Method (PWSM). The sound pressure coefficient can be gained by collocating points along the meridian line to satisfy the Neumann boundary condition. The mode convergence analysis of the cylindrical shell is carried out to guarantee calculation precision. Also, the reliability of the present method on sound radiation is verified by comparing with experimental results and numerical results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.49-56
• /
• 2004

Model updating is a very active research field, in which significant efforts has been invested in recent years. Model updating methodologies are invariably successful when used on noise-free simulated data, but tend to be unpredictable when presented with real experimental data that are-unavoidably-corrupted with uncorrected noise content. In this paper, Reanalysis using frequency response functions for correlating and updating dynamic systems is presented. A transformation matrix is obtained from the relationship between the complex and the normal frequency response functions of a structure. The transformation matrix is employed to calculate the modified damping matrix of the system. The modified mass and stiffness matrices are identified from the normal frequency response functions by using the least squares method. One simulated system is employed to illustrate the applicability of the proposed method. The result indicate that the damping matrix of correlated finite element model can be identified accurately by the proposed method. In addition, the robustness of the new approach uniformly distributed measurement noise Is also addressed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.355-360
• /
• 1996

When the operational strains of a structure can not be directly measured in order to predict the life of the structure due to the problem of the attachment, those must be obtained indirectly. Since the displacement and the strain are interrelated, the strain can be predicted from the measured displacement and displacement-strain transformation matrix. The transformation matrix is dependent on the boundary condition, unfortunately, and it is also difficult to know exactly that of the operational system. In this study, for the structure with arbitrary boundary condition under the operation, the approximate method is proposed in order to predict the operational strains using the transformation matrix obtained by using free boundary conditions. And the method is applied to predict the strains of leads of surface mount component under the vibration of the printed circuit board.

• 한국경영과학회지
• /
• 제36권4호
• /
• pp.29-41
• /
• 2011

As industires are evolving into a more advanced type industrial system, service economy has been more emphasized. But with the expansion of the service economy, the failure of the service has also increased. Customers flee caused by the service failure leads to from simple problems like financial loss to serious problems like damaging corporate image. Therefore, if possible, the system providing defect-free service should be established. If this is not possible, preventive measures should be taken in order to minimize the failure. The study as a tool to prevent service failure presents the concepts "service error matrix." And to confirm whether this idea is practical or not, this study investigated the hotel, one of the leading service industries, about actually occurring service failure and applied to service error matrix suggested in this study. Finally service blueprint and Poka-yoke are completed in order to reduce service failure of Y hotel which was the object of the interview for this study.