• 센서학회지
• /
• 제33권1호
• /
• pp.34-39
• /
• 2024

Energy harvesting technology that converts the wasted energy resources into electrical energy is emerging as a semipermanent power source for self-powered electronics and wireless low-power sensor systems. Among the various energy conversion techniques, flexible piezoelectric energy harvesters (f-PEHs), using materials with piezoelectric effects, have attracted significant interest because they can harvest a small mechanical energy into electrical signals without constraints of time and space in various environments. In this study, we used a flexible piezoelectric composite film fabricated by dispersing BaHf_xTi_(1-x)O₃ (x = 0, 0.01, 0.05, 0.1) piezoelectric powders inside a polymeric matrix to facilitate f-PEHs. The fabricated f-PEH with optimal Hf contents (x = 0.05) generated a maximum output voltage of 0.95 V and current signal of 130 nA with stable electrical/mechanical disabilities under periodically bending deformations. In addition, we demonstrated a cantilever-type f-PEH and investigated its potential as a sensor by characterizing the output performance under mechanical vibrations at various frequencies. This study provides the breakthrough for realizing self-powered energy harvesting and sensing systems by adopting the lead-free piezoelectric composites under vibrational environments.

• 한국지역지리학회지
• /
• 제4권2호
• /
• pp.49-64
• /
• 1998

연구지역에서 발달하는 테일러스들은 테일러스의 일반적인 특성을 잘 반영하고 있다. 우리나라에 분포하는 테일러스가 보통 rock fall talus이듯이 본 연구지역의 테일러스도 동일한 유형으로 판단된다. 또 테일러스의 사면형태, 형성시기 발달과정, 미지형적 특성 등은 지금까지 발표된 여러 연구결과들과 거의 일치하고 있다. 그러나 인접한 테일러스간의 경계 부분에서는 암설입경의 상대적 크기에 따라 약간의 지형적 차이점을 인식할 수 있었다. 특히 본 연구에서는 테일러스 암설 최적층의 내부구조를 국내 처음으로 확인하여 3가지의 뚜렷한 층위를 구분할 수 있었다. 즉, 암설로만 구성된 표층과 암실과 세립물질(실트질 모래)이 혼재된 중간층 그리고 과거의 토양층인 기저층 등으로 구분된다. 또 암설 퇴적층에 대한 내부구조 인식은 테일러스 형성 당시로 부터 현재까지의 기후환경과 암설의 퇴적양상을 밝히는데 매우 중요하며 앞으로 이 분야의 연구에 큰 도움을 줄 것으로 생각된다. 한편 국지적으로 특수기상이 나타나는 빙혈이 있는 빙계계곡의 경우 그것의 형성에는 단층작용의 역할이 중요한 것으로 판단된다. 그러나 이 곳을 흐르는 쌍계천이 유독 빙계계곡에서만 협곡(빙계계곡의 폭은 주변 곡쪽의 $1/8{\sim}1/10$정도임)을 형성하는 이유에 대해서 정곡의 가능성을 제시했지만 입증할 만한 자료가 없는 것이 유감이다.

• 수산해양기술연구
• /
• 제21권2호
• /
• pp.131-136
• /
• 1985

코너에서의 특이점이 weak 표면 특이점이라면, 반잠수 반원에 대한 Neumann-Kelvin 문제는 코너에서 속도가 유계인 한 개의 최소특이해를 가진다. 그러나 왜 유계인 조건이 코너에서 부과되어야 하는가 하는 명백한 물리적 이유는 없다. 코너는 정체점이 되고 여기서 섭동속도는 전진속도와 같다. 그리고 코너에서의 선형화는 타당하지 않다. 그러나 우리는 이러한 것을 무시하고 코너에서 이 점을 가져야만 한다고 제안한다. 따라서 이것이 코너에서 약하거나 강한 특이점을 가지는 섭동방정식의 해를 찾기 위한 적당한 이유이다. 그러나 어떤 특이점이 적당한가를 결정하는 명확한 방법은 없다. Ursell은 그의 연구에서 (19)식의 p와 q를 0으로 두어 유일해를 결정하기도 하였다. Suzuki는 자유표면에 대하여 에너지 보존을 취하여 유일해를 확정시키는 부가적인 조건을 제시하기도 하였다. G (ξ,η;x, y)는 y>0일 때 (x, y)에서 소스를 나타내며, 실제로 G (ξ,η;a, 0)는 weak 표면특이점이다. 최소특이해에 대한 표현은 (11)로부터 추론할 수 있고 각각의 코너에서 불연속 weak 표면특이점과 함께 소스의 연속적인 분포로 구성된다. Maruo는 세장체 이론의 적응으로부터 유도된 근사방법을 소개하였는데 이것은 Neumann-Kelvin 문제의 Kernel 함수에 대한 근사와 기본적으로 같다. 비록 왜 최소특이해가 2차원에서 택해져야 하는가에 대한 명확한 물리적인 이유는 없더라 해도, 어떻게 상응하는 유계조건을 3차원에도 적용할 수 있는가 하는 것이 최근 연구과제 중의 하나다. Ursell의 연구에 의한 경험은 앞으로 완전한 비점성 3차원 문제의 취급에 사용될 것이고, Maruo의 세장선 근사와는 다른 방법으로 3차원 Neumann-Kelvin 문제를 해석할 수 있을 것이다.의 수는 오히려 약간 증가하는 것으로 보이며, 고농도처리시 이들 값이 다시 감소하는 것은 Chain들의 운동이 급격해지면서 일부 비정 chain들이 절단되어서 결과적으로 T.M. 및 T.T.M.의 수는 오히려 약간 증가하는 것으로 보이며, 고농도처리시 이들 값이 다시 감소하는 것은 Chain들의 운동이 급격해지면서 일부 비정 Chain들이 절단되어서 결과적으로 T.M. 및 T.T.M.의 수가 감소하기 때문이라 생각되었다.각되었다.n 4 cases by ultrasonography. And ultrasonography could not reveal collaterals, arteriovenous shunt and thread and streaks sign.순에 최대 밀도를 나타내였고, 10월 중순 부터는 채집할 수 없음을 알았다.위분지 이상에서 3％로 자엽절 2분지의 비중이 특히 컸다.스 접종 8일 후의 중장원동세포내에서 A형 및 B형 봉입체가 형성되었음을 확인하였다. 10. FV감염 중장조직세포의 전자현미경 관찰에서는 바이러스 접종 5일 후에 배상세포의 'cytoplasmic wall'이 비대해지고 그 내부에 virus-specific vesicle이 형성되었으며, 바이러스 접종 8일 후에는 virus-specific vesicle, 바이러스 입자, linear structure, tubular structure 및 전자밀도가 높은 matrix 등의 바이러스 감염에 대한 특이적인 구조물이 배상세포의 세포질에서 관찰되었으며, microvilli내에서 바이러스 입자의 존재도 확정되었다. 특히 virus-specific vesicle 주위에서는 전자밀도가 높은 구형의 바이러스 입자 유사체가 관찰되었는데, 이것은 virus-specific vesicle 주위에서 바이러스 조립이 일어나는 것을 추정된다

• 한국식물학회:학술대회논문집
• /
• 한국식물학회 1996년도 제10회 식물생명공학심포지움 고등식물 발생생물학의 최근 진보
• /
• pp.61-74
• /
• 1996

Human and monogastric animals can not synthesize 10 out of the 20 amino asids and therefor need to obtain these from their diet. The plant seed is a major source of dietary protein. It is particular important in their study to increase nutritional quality of the seed storage proteins. The low contents of lysine, asparagine and threonenein various cereal seeds and of cystein and methionine. In legume seeds is due to the low proportions of these amino acids in the major storage proteins, we have tried to apply the three strategies; (1) mutagenesis and selection of specific amino acid analogue resistance, (2) cloning and expression study of lysine biosynthesis related gene, (3) transfomation of lysine rich soybean glycinin gene. The 5-methyltryptophan (5MT) resistant cell lines, SAR1, SAR2 and SAR3 were selected from anther derived callus of rice (Oryza sativa L. "Sasanishiki"). Among these selected cell lines, two (SAR1 and SAR3) were able to grow stably at 200 mg/L of 5MT. Analysis of the freed amino acids in callus shows that 5MT resistant cells (SAR3) accumulated free tryptophan at least up to 50 times higher than those that of the higher than of SAS. These results indicated that the 5MT resistant cell lines are useful in studies of amino acid biosynthesis. Tr75, a rice (Oryza sativa L., var. Sasanishiki) mutant resistant to 5MT was segregated from the progenies of its initial mutant line, TR1. The 5MT resistant of TR75 was inherited in the M8 generations as a single dominant nuclear gene. The content of free amino acids in the TR75 homozygous seeds increased approximately 1.5 to 2.0 fold compared to wild-type seeds. Especially, the contents of tryptophan, phenylalanine and aspartic acid were 5.0, 5.3 and 2.7 times higher than those of wild-type seeds, respectively. The content of lysine is significantly low in rice. The lysine is synthesized by a complex pathway that is predominantly regulated by feedback inhibition of several enzymes including asparginase, aspatate kinase, dihydrodipicolinat synthase, etc. For understanding the regulation mechanism of lysine synthesis in rice, we try to clone the lysine biosynthetic metabolism related gene, DHPS and asparaginase, from rice. We have isolated a rice DHPS genomic clone which contains an ORF of 1044 nucleotides (347 amino acids, Mr. 38, 381 daltons), an intron of 587 nucleotides and 5'and 3'-flanking regions by screening of rice genomic DNA library. Deduced amino acid sequence of mature peptide domain of GDHPS clone is highly conserved in monocot and dicot plants whereas that of transit peptide domain is extremely different depending on plant specie. Southern blot analysis indicated that GDHPS is located two copy gene in rice genome. The transcripts of a rice GDHPS were expressed in leaves and roots but not detected in callus tissues. The transcription level of GDHPS is much higher in leaves indicating enormous chloroplast development than roots. Genomic DNA clones for asparaginase genes were screened from the rice genomic library by using plaque hybridization technique. Twelve different genomic clones were isolated from first and second screening, and 8 of 12 clones were analyzed by restriction patterns and identified by Southern Blotting, Restriction enzyme digestion patterns and Southern blot analysis of 8 clones show the different pattern for asparaginase gene. Genomic Southern blot analysis from rice were done. It is estimated that rice has at least 2-3 copy of asparaginase gene. One of 8 positive clones was subcloned into the pBluescript SK(+) vector, and was constructed the physical map. For transformation of lysine rich storage protein into tobacco, soybean glycinin genes are transformed into tobacco. To examine whether glycinin could be stably accumulated in endosperm tissue, the glycinin cDNA was transcriptionally fused to an endosperm-specific promotor of the rice storage protein glutelin gene and then introduced into tobacco genomic via Agrobacterium-mediated transformation. Consequently the glycinin gene was expressed in a seed-and developmentally-specific manner in transgenic tobacco seeds. Glycinin were targeted to vacuole-derived protein bodies in the endosperm tissue and highly accumulated in the matrix region of many transgenic plant (1-4% of total seed proteins). Synthesized glycinin was processed into mature form, and assembled into a hexamer in a similar manner as the glycinin in soybean seed. Modified glycinin, in which 4 contiguous methionine residues were inserted at the variable regions corresponding to the C - teminal regions of the acidic and basic polypeptides, were also found to be accumulated similarly as in the normal glycinin. There was no apparent difference in the expression level, processing and targeting to protein bodies, or accumulation level between normal and modified glycinin. glycinin.

• 대한화장품학회지
• /
• 제30권2호
• /
• pp.227-233
• /
• 2004

자외선이 피부에 지속적으로 조사되면 썬번, 염증, 광노화와 같은 다양한 부작용이 생기게 된다. 따라서 광손상에 대한 보호작용은 점점 중요성이 인식되고 있으며, 천연 식물추출물에서 자외선에 대한 광보호효과가 있는 안전하고 효과적인 물질개발에 대한 연구가 진행되고 있다. 본 연구는 자외선에 의해 유도된 피부손상에 대한 보호효과가 우수한 천연식물추출물에 대한 것이다. 향나무, 능소화, 비자추출물에서 자외선에 의해 생성되는 라디칼에 대한 항산화효과, MMP 발현 및 활성 저해, 염증관련 사이토카인인 인터루킨 1알파, 6, 프로스타글란딘 E$_2$ 생성저해효과 등으로 피부세포보호 효과를 연구하였다. 실험결과 천연추출물 중 향나무추출물과 능소화추출물이 프리라디칼 및 슈퍼옥사이드 라디칼 소거효과가 우수하게 나타났으며 피부 콜라겐과 같은 메트릭스를 분해하는 효소인 MMP-1의 활성 및 발현 저해효과는 섬유아세포에서 UVA 조사에 의한 실험에서 우수하게 나타났으며, 피부세포 배양액에 대해 zymography를 실시하여 활성이 감소됨을 확인하였다. 피부 각질형성세포에서 자외선에 의해 유도된 염증관련 사이토카인인 인터루킨 6의 발현량 실험에서도 무처리군에 비해 향나무추출물이 인터루킨 6을 30% 정도 저해효과가 나타났으며, 염증반응 중 cyclooxygenase(COX)에 의한 경로에서 생성되는 프로스타글란딘 E$_2$의 생성량도 감소시켰다. 사람피부에서 SLS (0.5%) 첩포로 유발된 자극성 피부염의 항염증 효과 평가 시 SLS에 의해 유발되는 자극정도가 피검자의 피부상태에 따라 다양하게 나타났으며, 향나무 추출물 함유 에멀젼 제품 도포 실험에서는 피부 홍반 완화 효과와 피부장벽 회복효과가 우수하게 나타났다. 이상의 결과로 향나무추출물은 자외선 조사 및 SLS에 의한 피부손상에 대한 피부세포보호작용이 우수하여 광노화에 대응하는 자극완화 소재로서의 화장품 응용 가능성을 확인하였다.

• Tuberculosis and Respiratory Diseases
• /
• 제56권1호
• /
• pp.51-66
• /
• 2004

연구배경 : 폐 섬유화증의 진행에는 세포외 간질의 대사에 관여하는 gelatinase가 중요한 역할을 하는 것으로 알려져 있으며, gelatinase의 작용은 사이토카인을 비롯한 여러 가지 요소에 의해 조절되는 것으로 알려져 있다. 지금까지 $interferon-{\gamma}$($IFN-{\gamma}$)는 폐섬유화를 억제하는 것으로 알려져 있지만 gelatinase의 작용에 $IFN-{\gamma}$가 미치는 영향은 잘 밝혀져 있지 않다. 이에 저자들은 bleomycin 유도 백서 폐 섬유화 모델에서 $IFN-{\gamma}$가 폐 섬유화에 미치는 영향과MMP-2, -9과 이의 길항제인 TIMP-1, -2 그리고 Th-2 사이토카인의 변화에 미치는 영향을 조사함으로써, $IFN-{\gamma}$가 폐 섬유화증에 미치는 영향과 기전을 연구하고자 하였다. 재료 및 방법 : Sprague-Dawley계의 수컷 흰쥐를 정상 대조군, bleomycin 군, bleomycin+$IFN-{\gamma}$ 군의 세 군으로 나누어, bleomycin 군 과 bleomycin+$IFN-{\gamma}$ 군은 bleomycin sulfate를 생리식염수에 섞어 기관 내로 주입하였고(6 U/kg), bleomycin+$IFN-{\gamma}$ 군은 $IFN-{\gamma}$를 14일간 근육주사 하였다($2{\times}105U/kg$). 실험동물은 3, 7, 14, 28일에 폐를 얻어 hematoxylineosin 염색과 Masson's trichrome 염색을 하여 폐의 염증 반응과 섬유화 정도를 관찰하였고, 폐 조직 내의 hydroxyproline 함량, MMP-2, -9, TIMP-1, -2에 대한 Western blot, zymography와 reverse zymography, IL-4와 IL-13에 대한 ELISA검사를 시행하였다. 결 과 : 1. 폐 염증은 bleomycin 투여 7일째에는 $IFN-{\gamma}$를 투여한 경우 더 심하게 일어났으나(bleomycin 군 : bleomycin+$IFN-{\gamma}$ 군=$2.08{\pm}0.15:2.74{\pm}0.29$, P<0.05), 폐 섬유화는 bleomycin 투여 후 28일째 $IFN-{\gamma}$ 투여에 의해 유의하게 감소되었다(bleomycin 군 : bleomycin+$IFN-{\gamma}$ 군=$3.94{\pm}0.43:2.46{\pm}0.13$, P<0.05). 2. 폐 내 hydroxyproline 함량은 bleomycin 투여 28일 후 $IFN-{\gamma}$ 투여에 의해 유의하게 감소되었다(bleomycin 군 : bleomycin+$IFN-{\gamma}$ 군=$294.04{\pm}31.73{\mu}g/g:194.92{\pm}15.51{\mu}g/g$, P<0.05). 3. Bleomycin 투여에 의해 MMP-2 단백질의 양이 증가되는 소견이 Western blot에서 관찰되었는데 MMP-2의 증가는 bleomycin 투여 14일에 최고에 이르렀으며, $IFN-{\gamma}$의 투여에 의해 bleomycin에 의한 MMP-2의 증가는 억제되었으나 대조군 수준으로 감소하지는 않았다. 4. Zymography 검사에서 bleomycin 투여 3일째에는 활성화된 형태의 MMP-2가 $IFN-{\gamma}$에 의해 유의하게 증가되었으나(bleomycin 군 : bleomycin+$IFN-{\gamma}$ 군=$209.63{\pm}7.60%:407.66{\pm}85.34%$, P<0.05), 투여 14일 후에서는 $IFN-{\gamma}$에 의해 활성화된 상태의 MMP-2가 유의하게 감소되었다(bleomycin 군 : bleomycin+$IFN-{\gamma}$ 군=$159.36{\pm}20.93%:97.23{\pm}12.50%$, P<0.05). 5. Bleomycin을 투여한 후 bleomycin 군과 bleomycin+$IFN-{\gamma}$ 군 모두에서 IL-4의 양이 감소되었으나, 두 군간 차이는 통계적으로 유의하지는 않았고, IL-13은 별 다른 차이가 없었다. 결 론 : Bleomycin에 의한 백서 폐 섬유화 모델에서 $IFN-{\gamma}$는 초기 폐 염증을 증가시키지만 후기 폐 섬유화는 억제시킨다는 것을 알 수 있었다. $IFN-{\gamma}$가 폐 섬유화를 억제하는 것은 MMP-2의 활성화를 억제하기 때문인 것으로 생각한다. 또한 $IFN-{\gamma}$에 의한 MMP-2의 기능 억제는 Th-2 사이토카인을 억제하여 이루어지는 것 같지는 않았다. 본 논문을 기초로 향후 $IFN-{\gamma}$가 MMP-2의 활성화를 조절하는 기전과 MMP-2의 활성화가 폐섬유화에 미치는 영향에 대한 연구가 필요할 것으로 생각한다.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.762-767
• /
• 2009

해외 열대작물 씨앗에서 추출한 식물성 오일을 이용하여 바이오디젤을 생산하고 물성분석을 통해 차량연료로서의 사용가능성을 검토하는 연구를 수행하였다. 유리지방산 함량이 높은 열대작물 오일의 효율적인 바이오디젤 생산을 위해서는 유리지방산을 산촉매로 에스테르화한 후 전이에스테르화 반응하는 2단계 반응공정의 적용이 필요하였다. 전처리(에스테르화) 반응에 적합한 촉매를 선정하기 위해 3가지 산 촉매의 비교실험 수행 결과 황산이 최적 촉매임을 확인하였고, 반응표면분석법(response surface method, RSM)에 의해 도출한 최적 반응조건은 황산 촉매 0.982%와 메탄올 26.7%로 나타났다. 전이에스테르화 반응에 대한 최적화 실험을 반응표면분석법에 근거하여 수행하고, 결과로 KOH 촉매 1.24%, 메탄올 22.76%로 확인되었지만 본 연구팀의 선행 실험의 반응조건(KOH 0.8%)보다 과량의 촉매가 투입된 것으로 나타났다. 이에 대한 확인실험으로 메탄올과 촉매 투입량에 대한 추가 실험을 수행하였으며, 그 결과로서 최적 반응조건으로 KOH 촉매 0.8%와 메탄올:오일 몰비 6.2:1로 도출하였으며 반응생성물의 분석결과 지방산 메틸에스테르(fatty acid methyl ester, FAME) 100.8%, 산가 0.45 mgKOH/g, 수분 0.00%, 산화안정성 0.70 h, 총 글리세롤 함량 0.04%, Mono-glyceride 함량 0.04%, Di-glyceride 함량 0.01%, Tri-glyceride 함량 0.00%, 동점도($40^{\circ}C$에서) $4.041mm^2/s$, 저온필터막힘점 $1.0^{\circ}C$로 주요 바이오디젤 품질규격을 만족하는 것으로 나타났다.

• 한국방사선학회논문지
• /
• 제14권6호
• /
• pp.773-780
• /
• 2020

4차 산업의 발전으로 의학·보건·바이오 등 여러 과학기술 분야에서는 질병을 예방하고 질병에 대한 피해를 줄이기 위한 연구가 이루어지고 있으며, 최근에는 ICT 기술의 발전과 더불어 인공지능 기술이 급부상하고 그 효용성이 입증되면서 영상의학 검사의 영상 분석에 인공지능 기술이 도입되어 연구되고 있다. 본 논문에서는 흉부 X선 영상을 이용하여 폐렴의 분류와 검출에 대한 딥러닝 모델을 직접 적용해보고 실제로 Inception 계열의 딥러닝 모델이 폐렴 검출에 있어 유용한 모델인지 평가하고자 한다. 실험재료는 캐글(Kaggle)에서 무료로 제공 및 공유하는 흉부 X선 영상 데이터 세트를 사용하였으며 전체 3,470개의 흉부 X선 영상 데이터 중 학습 데이터 세트 1,870개, 검증 데이터 세트 1,100개, 테스트 데이터 세트 500개로 분류하였다. 실험결과 Inception V3 딥러닝 모델의 Metric 평가에 대한 결과값은 정확도는 94.80%, 정밀도는 97.24%, 재현율은 94.00%, F1 스코어는 95.59의 결과값을 나타내었다. 그리고 흉부 X선 영상의 페렴 검출 및 분류에 대하여 Inception V3 딥러닝 모델링에 대한 최종 에포크의 정확도는 학습 모델링의 경우 94.91%, 검증 모델링은 89.68%의 정확도를 나타내었다. 손실함수 값의 평가는 학습 모델링은 1.127%, 검증 모델링은 4.603%의 손실함수 값을 나타내었다. 이러한 결과로 Inception V3 딥러닝 모델은 흉부영상 데이터의 특징 추출 및 분류에 있어 매우 우수한 딥러닝 모델이며 학습상태 또한 매우 우수하다고 평가하였다. 테스트 모델링에 대한 매트릭스 정확도 평가 결과 정상 흉부 X선 영상 데이터의 경우 96%, 폐렴 흉부 X선 영상데이터의 경우 97%의 정확도가 입증되었다. Inception 계열의 딥러닝 모델의 경우 흉부 질환의 분류에 있어 유용한 딥러닝 모델이 될 것이라고 판단되며 인력의 보조적인 역할 또한 수행할 수 있을 것이라고 기대되어 부족한 의료인력 문제에도 해결점이 될 것이라고 사료된다. 향후 딥러닝을 이용한 폐렴의 진단에 대한 유사 연구 시 본 연구는 유사 연구의 기초자료로 제시될 것이라고 기대된다.

• 한국토양비료학회지
• /
• 제41권4호
• /
• pp.260-266
• /
• 2008

질산과 인산의 수직이동성에 대한 토양특성의 영향을 구명하고자 비가림 하우스에서 소형라이시메터(지름 300 mm, 토양깊이 450 mm) 시험을 수행하였다. 대상토양은 농경지 세 지점으로부터 표토 0~20cm를 채취한 후 이 토양의 풍건세토분획을 이용하여 수행하였다: mesic family of Typic Dystrudepts (토양 A, 사양토, 유기물함량 1.4%); mixed, mesic family of Typic Udifluvents (토양 B, 양토, 유기물함량 2.6%); 시설재배토양(토양 C, 사양토, 유기물함량 5.6%). 2주 동안 안정화시킨 토양의 표면에 질소와 인을 $150kg\;urea-N\;ha^{-1}$ 과 $100kg\;KH_2PO_4-P_2O_5\;ha^{-1}$ 만큼 처리하고, 65일 동안 7번 관수(총관수량 213 mm, 약 1 pore volume)하며 주기적으로 깊이 10, 20, 30 cm의 토양용액과 용탈액을 채취하여 질산과 인산농도를 분석하였다. 총 용탈액량은 토양 C > 토양 A > 토양 B 순으로 질산 용탈량, 토양 B > 토양 A > 토양 C 과 역의 관계를 가졌다. 토양 A와 B에서는 요소처리 후 깊이 10 cm에서 토양용액 중 질산 농도 증가가 뚜렷이 나타난 반면, 토양 C에서는 나타나지 않았다. 토양 B의 높은 질산이동성은 상대적으로 높은 점토함량으로 음전하를 띤 교질의 음이온배척과 느린 수분흐름으로 물의 머무름시간이 길어 토양매트릭스 질산의 추출을 촉진하기 때문으로 볼 수 있었다. 반면 토양 C는 질산의 이동성이 낮게 나타났다. 이는 유기물 함량이 높아 생기는 발수성으로 선택류와 질산의 미생물 부동화 때문으로 추정할 수 있었다. 인산용탈은 질산과 달리 인포화도가 가장 높은 토양 C에서만 검출되었다. 토양용액 중 인산농도는 인포화도의 순서와 동일하게 토양 C > 토양 B의 순서였고 토양 A에서는 검출되지 않았다. 따라서 인산의 이동성은 인포화도에 의해 크게 영향을 받으며, 일정 수준으로 축적될 때 까지는 용탈손실은 나타나지 않는다고 판단할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.