• Journal of Preventive Medicine and Public Health
• /
• v.41 no.6
• /
• pp.365-372
• /
• 2008

Objectives : There are very few researches on North Korea's academic activities. Furthermore, it is doubtful that the available data are reliable. This study investigated research activities and knowledge structure in the field of Preventive Medicine in North Korea with a network analysis using co-authors and keywords. Methods : The data was composed of the North Korean Journal of preventive medicine ranged from Vol. 1 of 1997 to Vol. 4 of 2006. It was the matrix of 1,172 articles by 1,567 co-authors. We applied R procedure for keywords abstraction, and then sought for the outcome of network forms by spring-KK and shrinking network. Results : To comprehend the whole networks explicitly demonstrated that the academic activities in North Korea s preventive medicine were predisposed to centralization as similar as South Korea's, but on the other aspect they were prone to one-off intermittent segmentation. The principal co-author networks were formulated around some outstanding medical universities seemingly in addition to possible intervention by major researchers. The knowledge structure of network was based on experimentation judging from keywords such as drug, immunity, virus detection, infection, bacteria, anti-inflammation, etc. Conclusions : Though North Korea is a socialist regime, there were network of academic activities, which were deemed the existence of inducive mechanism affordable for free research. Article keywords has laid greater emphasis on experiment-based bacterial defection, sustainable immune system and prevention of infection. The kind of trend was a consistent characteristic in preventive medicine of North Korea haying close correlation with Koryo medical science.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.233-236
• /
• 2009

Purpose: Spindle cell lipoma(SCL) is an uncommon subcutaneous soft tissue neoplasm that arises in the shoulder and posterior neck of older male patients. The imaging appearance of SCL is not pathognomonic and can display some features overlapping with liposarcoma. We report a case of SCL on the posterior neck. Method: The patient is a 50 - year - old man with a slowly enlarging subcutaneous mass on the right side of posterior neck. Computed tomographic imaging revealed a 7.0 cm sized, well - circumscribed, heterogenous and fatty mass with enhanced solid components. Whole body Fluorine - 18 Fluorodeoxyglucose Positron emission tomogram(FDG PET-CT) showed little increase of FDG uptake on the right posterior neck and there was no distant metastasis. Results: The mass was surgically removed. The resection margin was free of tumor on frozen biopsy. Histopathologic examination indicated spindle cell lipoma consisting of a mixture of mature adipocytes and uniform spindle cells within a matrix of mucinous material. Conclusion: Although CT image of solidtary mass in posterior neck is similar with the one of liposarcoma, we should consider that it may be a spindle cell lipoma if PET-CT and other systemic studies reveal no distant metastasis. And we should perform fine needle aspiration to differentiate SCL from malignant lesions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.100-100
• /
• 2011

Nanomaterial architecture with highly ordered, vertically oriented $TiO_2$ nanotube arrays shows a good promise for diverse technological applications. As inspired from the literature reports that Nickel modification can improve the photocatalytic activity of $TiO_2$, it was planned to coat Ni into the $TiO_2$ matrix. In this study, first $TiO_2$ nanotubes(TiNTs) were prepared by anodization (60V,3min) in HF-free aqueous electrolyte on ultrasonically cleaned polished titanium sheet substrates ($1{\times}7cm^2$). The typical thickness of the sintered TiNT ($500^{\circ}C$for10min) was ~1 micronas confirmed from the FESEM study. In the next part, as-anodized and sintered TiNT/Ti photoanodes were used to coat Ni by AC electrodeposition from aqueous 0.1M nickel sulphate solution. During AC electrodeposition, conditions such as 1V DC offset voltage, 9V amplitude (peak-to-peak) and 750 Hz frequency were fixed constant and the deposition time was varied as 0.5 min, 1 min, 2 min and 10 min. The photoelectrochemical performance of pristine and Ni modified TiNT/Ti photoanodes was measured in 1N NaOH electrolyte under 1 SUN illumination in the potential range of -1V and 1.2V versus Ag/AgCl reference electrode. The photocurrent performance of TiNT/Ti photoanode decreased upon Ni modification and the results were confirmed after repeated experiments. This suggests us that Ni modification inhibits the photoelectrochemical performance of $TiO_2$ nanotubes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1334-1337
• /
• 2006

System identification is the field of modeling dynamic systems from experimental data. As a modeling technique, we can mention finite element method (FEM). In addition, we are able to measure modal data as the experimental data. The system can be generally categorized into a gray box and black box. In the gray box, we know mathematical model of a system, but we don't know structural parameters exactly, so we need to estimate structural parameters. In the black box, we don't know a system completely, so we need to identify system from nothing. To date, various system identification methods have been developed. Among them, we introduce system realization theory which uses Hankel matrix and Eigensystem Realization Algorithm (ERA) that enable us to identify modal parameters from noisy measurement data. Although we obtain noise-free data, however, we are likely to face difficulties in identifying a structure with hidden modes. Hidden modes can be occurred when the input or output position comes to a nodal point. If we change a system using a mode decoupling controller, the hidden modes can be revealed. Because we know the perturbation quantities in a closed loop system with the controller, we can realize an original system by subtracting perturbation quantities from the closed loop system. In this paper, we propose a novel method to identify a structure with hidden modes using the mode decoupling controller and the associated example is given for illustration.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.237-246
• /
• 1999

A finite element model is studied to simulate unsteady free surface flow based on dynamic wave equation and collocation method. The collocation method is used in conjunction with Hermite polynomials, and resulting matrix equations are solved by skyline method. The model is verified by applying to hydraulic jump, nonlinear disturbance propagation and dam-break flow in a horizontal frictionless channel. The computed results are compared with those by Bubnov-Galerkin and Petrov-Galerkin methods. It is also applied to the North Han River to simulate the floodwave propagation. The computed results have good agreements with those of DWOPER model in terms of discharge hydrographs. The suggested model has proven to be one of the promising scheme for simulating the gradually and rapidly varied unsteady flow in open channels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.71-71
• /
• 2012

As the critical dimensions of integrated circuits are scaled down, the line width and spacing between the metal interconnects are made smaller. The dielectric film used as insulation between the metal lines contributes to the resistance-capacitance (RC) time constant that governs the device speed. If the RC time delay, cross talk and lowering the power dissipation are to be reduced, the intermetal dielectric (IMD) films should have a low dielectric constant. The introduction of Cu and low-k dielectrics has incrementally improved the situation as compared to the conventional $Al/SiO_2$ technology by reducing both the resistivity and the capacitance between interconnects. Some of the potential candidate materials to be used as an ILD are organic and inorganic precursors such as hydrogensilsequioxane (HSQ), silsesquioxane (SSQ), methylsilsisequioxane (MSQ) and carbon doped silicon oxide (SiOCH), It has been shown that organic functional groups can dramatically decrease dielectric constant by increasing the free volume of films. Recently, various inorganic precursors have been used to prepare the SiOCH films. The k value of the material depends on the number of $CH_3$ groups built into the structure since they lower both polarity and density of the material by steric hindrance, which the replacement of Si-O bonds with Si-$CH_3$ (methyl group) bonds causes bulk porosity due to the formation of nano-sized voids within the silicon oxide matrix. In this talk, we will be introduce some properties of SiOC(-H) thin films deposited with the dimethyldimethoxysilane (DMDMS: $C_4H_{12}O_2Si$) and oxygen as precursors by using plasma-enhanced chemical vapor deposition with and without ultraviolet (UV) irradiation.

• KSBB Journal
• /
• v.29 no.1
• /
• pp.50-57
• /
• 2014

NF-${\kappa}B$ is a transcriptional factor which is involved in many biological processes including immunity, inflammation, and cell survival. Many investigators studied on the mechanism involved in activation of NF-${\kappa}B$ signalling pathway via ubiquitination and degradation of $I{\kappa}B$ regarding skin disease. Some specific molecules including Akt, MEK, p38 MAP Kinase, Stat3, et al. represent convergence points and key regulatory proteins in signaling pathways controlling cellular events such as growth and differentiation, energy homeostasis, and the response to stress and inflammation. Ultraviolet (UV) irradiation has many adverse effects on skin, including inflammation, alteration in the extracellular matrix, cellular senescence, apoptosis and skin cancer. Prunus mume, a naturally derived plant extract, has beneficial biological activities as blood fluidity improvement, anti-fatigue action, antioxidative and free radical scavenging activities, inhibiting the motility of Helicobacter pyolri. Previous reports on various beneficial function prompted us to investigate UVB-induced or other immunostimulated biological marker regarding P. mume extract. P. mume extract suppresses UVB-induced cyclooxygenase-2 (COX-2) expression in mouse skin epidermal JB6 P+ cells. The activation of activator protein-1 and nuclear factor-${\kappa}B$ induced by UVB was dose-dependently inhibited by P. mume extract treatment. This results suggest that P. mume extracts might be used as a potential agents for protection of inflammation or UVB induced skin damage.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.60.2-60.2
• /
• 2012

기술의 발전이 비약적으로 성장하면서, 소비자의 요구는 빠르게 변하고 있다. 전자 소자를 응용한 제품 시장은 매해를 거듭할 수록 빠른 속도로 성능을 향상시키고 있다. 이에 따라 디스플레이 시장에서 가장 큰 관심은 작은 화면에서도 높은 해상도를 요구하고, 수광형의 구동방식이 아닌 능동형 구동방식을 갖는 AMOLED (Active Matrix Organic Light Emitted Diode)를 선호하고 있으며, 빠른 응답속도 기반을 갖는 표시소자를 요구하고 있다. 제품 생산자들의 고민은 기존의 비정질 실리콘 기반의 LCD (Liquid crystal display) 구동소자와 공정을 이용하여 소비자의 욕구에 접근하기가 점점 어려워지고 있다. 최근 이러한 문제점을 해결하고자 하는 노력들중에서 산화물 반도체 재료와 이를 이용한 박막 트랜지스터 개발이 큰 관심을 갖고 있다. 최근 InGaZnO 산화물 반도체 재료는 기존의 비정질 실리콘 반도체 재료 보다 높은 전계 이동도(> $10cm^2/V.s$)를 보이고 있으며, 비정질 실리콘 박막 트랜지스터의 구조에서 산화물 반도체 재료의 대체만으로 효과가 보일 수 있어서 큰 연구가 진행되어져 왔다. 하지만, InGaZnO 산화물 박막 트랜지스터에 대한 소자를 AMOLED에 적용할 때, 기존의 LTPS (low temperature poly-slicon)에서는 발견되지 않았던 소자의 전계신뢰성과 이동도 한계가 문제로 제기되었다. 또한, Indium이라는 희소원소의 사용은 향후 공정 단가와 희소 물질에 대한 위협등에 의하여 새로운 산화물 반도체 재료에 대한 요구와 관심이 발생하고 있다. 본 발표에서는 기존의 산화물 반도체 재료에 대한 차세대 디스플레이인 AMOLED와 유연 디스플레이에 대한 응용 가능성을 발표할 예정이다. 또한 산화물 반도체 재료의 신뢰성 문제에 대한 해결방법으로 신규 산화물 반도체 재료에 대한 연구 방향과 indium-free 계열을 이용한 저원가 산화물 반도체 연구에 대하여 소개할 예정이다. 앞으로 산화물 반도체 재료에 대한 연구와 응용은 기존의 실리콘 반도체 틀을 벗어난 새로운 응용분야를 열어줄 수 있을 것으로 기대하고 있으며, 그 기대에 대한 몇가지 예를 통하여 재료와 소자의 응용 가능성을 논의할 예정이다.

• Journal of KIISE
• /
• v.43 no.9
• /
• pp.1026-1033
• /
• 2016

Path-finding on a grid map is a problem generally addressed in the fields of robotics, intelligent agents, and computer games. As technology advances, virtual game worlds tend to be represented more accurately and more realistically, resulting in an excessive increase in the number of grid tiles and in path-search time. In this study, we propose a path-finding algorithm that allows a prompt response to real-time queries by constructing a reduced state space and by precomputing all possible paths in an offline preprocessing stage. In the preprocessing stage, we vertically decompose free space on the grid map, construct a connectivity graph where nodes are the decomposed regions, and store paths between all pairs of nodes in matrix form. In the real-time query stage, we first find the nodes containing the query points and then retrieve the corresponding stored path. The proposed method is simulated for a set of maps that has been used as a benchmark for grid-based path finding. The simulation results show that the state space and the search time decrease significantly.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.4
• /
• pp.511-517
• /
• 2013

In this work, a fibrous bed bioreactor with high specific surface area and good adsorption efficacy for S. cerevisiae cells was used as the immobilization matrix in the production of ethanol. In batch fermentation, an optimal ethanol concentration of 91.36 g/l and productivity of 4.57 g $l^{-1}\;h^{-1}$ were obtained at an initial sugar concentration of 200 g/l. The ethanol productivity achieved by the immobilized cells was 41.93% higher than that obtained from free cells. Ethanol production in a 22-cycle repeated batch fermentation demonstrated the enhanced stability of the immobilized yeast cells. Under continuous fermentation in packed-bed reactors, a maximum ethanol concentration of 108.14 g/l and a productivity of 14.71 g $l^{-1}\;h^{-1}$ were attained at $35^{\circ}C$, and a dilution rate of 0.136 $h^{-1}$ with 250 g/l glucose.