• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.321-323
• /
• 2008

This study suggests a modeling of grid-connected wind turbine generation systems and performs simulation according to increase/decrease of real wind speed. MATLAB/Simulink implemented modeling of grid-connected wind turbine generation system. Terminal voltage, grid voltage, and active/reactive power shall be observed following the performance of simulation.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.439-442
• /
• 1999

In this paper presents a modeling method for simulation of Tration Motor using Matlab/Simulink This model is well adopted in the traction motor and speed, torque estimation. This model consist o IM(induction motor) block, Load block and controller blocks. This paper use the indirect vecto control Because improve accuracy speed characters. The result show the better speed and torque characters. And effectiveness of Matlab/Simulink in simulations.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.145-147
• /
• 2008

In this paper, the implementation of the Permanent Magnet Synchronous Machine (PMSM) model based on the Matlab/Simulink is described. Due to the analysis of the mathematical dq-modeling, a vector controlled PMSM drive simulation is approached. With the simulated system, unlike in black block models, all machine parameters are accessible for control and verification. Based on the Matlab/Simulink, the model of the PMSM with load torque is established, the simulation is studied and some conclusions are given.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.184.3-184.3
• /
• 2010

This study suggests a modeling of grid-connected wind turbine generation systems and performs simulation according to increase/decrease of real wind speed. MATLAB & SIMULINK implemented modeling of grid-connected wind turbine generation system. Terminal voltage, grid voltage, and active/reactive power shall be observed following the performance of simulation.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.219-227
• /
• 2008

The DEVS (Discrete Event Systems Specification) formalism supports specification of discrete event models in a hierarchical modular manner. MATLAB/Simulink is widely used for modeling, simulating and analyzing continuous and discrete time systems. This paper proposes a realization of the DEVS formalism in MATLAB/ Simulink. The proposed design enables to use a great amount of mathematical packages and functions included in MATLAB /Simulink. The design is also employed as real time simulation and hybrid system simulation which is a mixture of continuous systems and discrete event systems. The paper introduces Simulink-DEVS model, in which a simulation algorithm is embedded. The model consists of a Simulink-atomic model and a Simulink-coupled model. In addition, the time advance algorithm to simulate the model is suggested. The algorithm handles the time synchronization and the accommodation of different concepts specific to continuous and discrete event models. Two experimental results are presented for a pure discrete event model and a hybrid model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.70-79
• /
• 2015

In this paper, enhanced stand-alone operation and development of Matlab/Simulink model of emergency diesel based hybrid energy system is presented. Simulations based on the remote community or islands were performed for PV-diesel-battery hybrid system. Modeling of PV-diesel-battery integrated system is done to perform under the solar radiation and load conditions on Matlab/Simulink platform. The models of diesel generator unit, battery energy storage system, PV and frequency-power control are developed and simulation studies have been carried out under various conditions using Matlab/Simulink and SimPowerSystem. It is demonstrated that the proposed system can provide reliable and good quality power to the customers in diesel synchronous generator-based hybrid energy systems.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.457-458
• /
• 2013

본 논문은 Simulink 모델을 기반으로 하여 FPGA 알고리즘을 설계하는 과정을 구현하였다. Simulink 모델은 SRF-PLL 제어기법을 적용하였으며, Simulink 모델은 기본적으로 부동소수점으로 구성된다. 그러나 FPGA 구현에 필요한 VHDL 코드는 고정 소수점 변환이 필요하므로, 부동 소수점 모델을 고정 소수점으로 변환하고 두 연산 기법의 시뮬레이션 결과를 비교분석하였다.

• Journal of Wind Energy
• /
• v.15 no.1
• /
• pp.60-68
• /
• 2024

In this study, a hardware-in-the-loop simulation (HILS) environment was established using MATLAB/Simulink to simulate and verify the power performance of a wind turbine. The target wind turbine was selected as the NREL 5 MW model, and modeling was performed based on the disclosed specifications. The HILS environment consists of a PC equipped with a MATLAB/Simulink program, a programmable logic controller (PLC) for uploading and linking control algorithms, and data acquisition (DAQ) equipment to manage wind turbine data input and output. The operation of the HILS environment was carried out as a procedure of operation (PC) of the target wind turbine modeled based on MATLAB/Simulink, data acquisition (PLC) of control algorithms, control command calculation (PLC), and control command input (PC). The simulation was performed using the HILS environment under turbulent wind conditions and compared with the simulation results performed under the same conditions in the HILS environment using the commercial program Bladed for performance verification. From the comparison, it was found that the dynamic simulation results of the Bladed HILS and the MATLAB HILS were close in power performances and the errors in the average values of rotor rotation speed and power generation between the two simulations were about 0.44 % and 3.3 %, respectively.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1168-1169
• /
• 2008

This study suggests a modeling of grid-connected wind turbine generation systems and performs simulation according to increase/decrease of real wind speed. Matlab & Simulink implemented modeling of grid-connected wind turbine generation system. Terminal voltage, grid voltage, and active/reactive power shall be observed following the performance of simulation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1954-1955
• /
• 2007

This paper presents a modeling method of speed controller for DC motor drive system by using the Embedded Target for TI C2000 DSP in MATLAB/SIMULINK. Speed controller is easily designed and implemented by using the MATLAB/SIMULINK program, and speed control response and stability of the DC motor can be improved. Feedback of motor speed is processed through C28x QEP(Quadrature Encoder Pulse) from encoder pulse. The controller is designed as PI speed controller. Simulation program is drawn using SIMULINK. Then a real-time program for speed control of the DC motor is downloaded into the eZdsp F2811 control board. Speed control response is verified through simulations and experiments.