• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1089-1095
• /
• 2010

Four biological candidate genes, natural resistance associated macrophage protein 1 (SLC11A1 or NRAMP), prosaposin (PSAP), interferon Gamma (IFNG), and toll-like receptor 4 (TLR4), were examined to identify single nucleotide polymorphisms (SNP) and associations of the SNP with antibody response kinetics in hens. An $F_2$ population was produced by mating $G_0$ highly inbred (<99%) males of two MHC-congenic Fayoumi lines with highly inbred Leghorn hens. The $F_2$ hens (n = 158) were injected twice with SRBC and whole, fixed Brucella abortus (BA). Blood samples were obtained before each immunization, at 7 d after primary immunization, and at several time points after secondary immunization. Minimum titers (Ymin) and the time needed to reach them (Tmin), and maximum (Ymax) titers and the time needed to reach them (Tmax), were estimated from the seven post-secondary immunization titers using a nonlinear regression model. The $F_2$ hens were genotyped for the four candidate genes by using PCR-RFLP for one SNP per gene, which identified the parental allele. General linear models were used to test associations of SNP genotypes with antibody response parameters and BW measured at 4 ages. The IFNG SNP was highly significantly (p<0.0125) associated with primary response to SRBC, Tmin to BA, Ymin to BA, and 12-week BW. The current study demonstrated that the novel IFNG promoter SNP was associated with antibody kinetics for BA and SRBC in laying hens, and also with BW, suggesting that this cytokine may play a pivotal role in the relationship between immune function and growth.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.2
• /
• pp.81-86
• /
• 2006

Of all factors that govern productivity in sericulture, the role of silkworm egg is of prime importance. The production of silkworm seed involves a long chain of interdependent and highly specialized conditions. Female moths of Bombyx mori L. commence egg deposition immediately when the moths were decoupled. More than 60% of eggs are deposited within 4 hrs after decoupling i.e. 62.33% in CSR-3, 61.67% in CSR-6, 62.50% in CSR-16 and 63.28% in CSR-17. Almost 90% of eggs were laid in the first 12 hrs (93.13% in CSR-3, 90.81% in CSR-6, 89.71% in CSR-16 and 93.17% eggs in CSR-17) after decoupling. Almost 8 to 10% of more eggs were laid when oviposition period was prolonged upto 48 hrs instead of 24 hrs. The present investigation showed that a significant increase of 45 (8.34%), 50 (9.98%), 41 (8.26%) and 45 (8.30%) (P < 0.01) numbers of more eggs were found between 24 to 48 hrs (T6 to T9) in CSR-3, CSR-6, CSR-16 and CSR-17 races respectively. The findings of present investigation is very important for sericulture industry while producing layings to keep for different hibernation schedule especially for autumn/late autumn crop, female may be allowed for prolonged oviposition to get 8 -10% more eggs and farmer may fetch 8 -10 kg. more cocoon yield/l00 dfls with more income.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.95-98
• /
• 2013

The LMS(Least Mean Square) algorithm, one of the most famous, is generally used because of tenacity and high mating spots and simplicity of realization, But it has trade-off between nonuniform collection and EMSE(Excess mean square error). To overcome this weakness, a variable step size is used widely, but it needs a lot of calculation loads. In this paper, we suggest changed algorithm in case of environment changes of cars and reduce amount of calculation as it uses original signal and noise signal of IGC(Instantaneous Gain Control) algorithm. In this paper, logarithmic function is removed because of real-time processing IGC. The performance of proposed algorithm is tested to adaptive noise canceller in automobile.

• Journal of Mushroom
• /
• v.2 no.4
• /
• pp.222-224
• /
• 2004

Sodam oyster mushroom(Pleurotus ostreatus were bred in Mushroom Research Institute, Gyonggi Province A.R.E.S in 2002. Sodam oyster mushroom were bred and cultivated one after mating single spores collected from Aenutari 1-ho and Suhan 1-ho. The major characteristics of the mushroom are showing a lot of pinheadings, the gray-colored and shallow cornhead-shaped pileus. Around 20 days at $20^{\circ}C$ were required for incubation of Sodam and the yield was shown high by 148.2g/bottle. As the activity of hypha is so strong, the proper time of pinheading is demanded.

• Journal of Veterinary Clinics
• /
• v.27 no.2
• /
• pp.205-208
• /
• 2010

A female Saanen goat was pregnated by a Markhor (Capra falconeri) and three Himalayan tahrs (Hemitragus jemlahicus) were mismated by a conspecific male at Seoul zoo. Cross-breeding whether intentional or unintentional is considered opposite to the primary rule of species conservation. The Markhor, imported in October, 2002, having the number of chromosomes (2n = 60) same as domestic goats accidently mated with a Saanen goat. The mating time was back-calculated on the basis of zookeepers' record. The Saanen and three Himalayan tahrs (2n = 48) were successfully aborted by intramuscularly injecting 15mg $PFG_2{\alpha}$ (dinoprost tromethamine).

• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.7-11
• /
• 2011

The installation phase for a topside module suggested can be divided into 9 stages, which include start, pre-lifting, lifting, lifted, rotating, positioning, lowering, mating, and end of installation. The transfer of the topside module from a transport barge to a crane vessel takes place in the first three stages, from start to lifting, while the transfer of the module onto a floating spar hull occurs in the last three stages, from lowering to the end. The coupled multi-body motions are calculated in both calm water and in irregular waves with significant wave height (1.52m), with suggested force equilibrium diagrams. The effects of the hydrodynamic interactions between the crane vessel and barge during the lifting stage have been considered. The internal forces caused by the load transfer and ballasting are derived for the lifting phases. The results of these internal forces for the calm water condition are compared with those in the irregular sea condition. Although the effect of pitch motion on the relative vertical motion between the deck of the floating structure and the topside module is significant in the lifting phases, the internal force induced pitch motion is too small to show its influence. However, the effect of the internal force on the wave-induced heave responses in the lifting phases is noticeable in the irregular sea condition because the transfer mass-induced draught changes in the floating structure are observed to have higher amplitudes than the external force induced responses.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.95-104
• /
• 2004

This paper proposes an efficient remote video evaluation system that is matched well with personalized characteristics of students using information filtering based on user profile. For making a question in forms of video, a key frame extraction method based on coordinate, size and color information is proposed. And Question-mating intervals are extracted using gray-level histogram difference and time window. Also, question-making method that combined category-based system with keyword-based system is used for efficient evaluation. Therefore, students can enhance their study achievement through both supplementing their inferior area and preserving their interest area.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.152-155
• /
• 2002

An industrial robot noise has various noise sources such as gears, motors, bearings, and controller fans. Among these, gears are the most dominant source for noise. The gear noise, caused by tooth profile, elastic deformation, machining error and wear, is directly correlated with the transmission error of mating gear. Due to the fact that has several axis and many gears, it is difficult to understand the characteristics of the vibration and noise of robots. In this study, some advanced analysis techniques based on digital signal processing such as power spectrum, time spectral map, RPM map, and etc., were applied for locating the dominant frequency components of the robot noises and identifying their sources. In addition, sound quality analysis was performed in order to evaluate the operator's annoyance. The noise and vibration measurements were carried out at several points during the operation of each axis considering the effect of load and posture of the robot. Eased on the results, proper countermeasures to reduce excessive noise level have been suggested considering the characteristics of sources.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.489-496
• /
• 1988

This paper is studied to know wear mechanism in variation of austempering temperature and holding time of austempered ductile cast iron against mating material SM45C hardened by heat treatment. The wear tests were carried out by rubbing the annular surface of two test pieces in dry sliding friction. The wear mechanism was investigated by scanning electron microscopy and the retained austenite volume fraction was investigated by X-ray diffractometer. The experimental results show that the wear characteristics depend largely on the oxidation of the testing materials which is influenced by the sliding velocity and distance. The retained austenite has a negative effect during frictional contact because it has increased severe wear by softened surface layer. It is shown experimentally that hard metals have lower frictional resistance and hence the resistance to adhesion is increased due to stronger interatomic linking bonds and increase in the surface energy.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.3
• /
• pp.861-871
• /
• 2016

The coastal water of Korean Peninsula is the major habitat for finless porpoises. However, hundreds of finless porpoises are currently caught incidentally by stow-net fishery every year. To prevent the mass mortality of finless porpoises and conserve marine animals, Busan Aquarium has been designated as a "Marine Life Ex-Situ Conservation Institution and Marine Animal Conservation Center," and Cetacean Research Institute, under the National Institute of Fisheries Science have started RRR (rescue, rehabilitation and release) project together since 2011. From 2012 to 2013, four individuals of finless porpoises had been rescued and two of them finally released to their original habitat after fully recovered in July 2013. As a result, according to growth curve of finless porpoise of Korea more than 140 cm of body length, 38 kg of total weight referred to adult, results of observation of the change in the hormone revealed that mating time of finless porpoises is January, Jun and July. To become the initial institution which rescues, treatment, husbandry and releases finless porpoise in Korea.