• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.90-94
• /
• 2016

In this work, [$Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_x(Zr_{0.5}Ti_{0.5})_{0.97-x}O_3-BiFeO_3$] (x=0.02 to 0.12) composition ceramics were fabricated by the conventional soild state reaction method and their microstructure and piezoelectric properties were investigated according to PNN substitution. The addition of small amount of $BiFeO_3$, $Li_2CO_3$, and $CaCO_3$ were used in order to decrease the sintering temperature of the ceramics. The XRD (x-ray diffraction patterns) of all ceramics exhibited a perovskite structure. The sinterability of PMW-PNN-PZT-BF ceramics was remarkably improved using liquid phase sintering of $CaCO_3$, $Li_2CO_3$. However, it was identified from of the X-ray diffraction patterns that the secondary phase formed in grain boundaries decreased the piezoelectric properties. According to the substitution of PNN, the crystal structure of ceramics is transformed gradually from a tetragonal to rhombohedral phase. The x=0.10 mol PNN-substituted PMW-PNN-PZT-BF ceramics sintered at $920^{\circ}C$ showed the optimum values of piezoelectric constant($d_{33}$), piezoelectric figure of merit($d_{33{\cdot}}g_{33}$), planar piezoelectric coupling coefficient($k_p$) and density : $d_{33}=566$ [pC/N], $g_{33}=29.28[10^{-3}mV/N]$, $d_{33{\cdot}}g_{33}=16.57[pm^2/N]$, $k_p=0.61$, density=7.82 [$g/cm^3$], suitable for duplex ultrasonic sensor application.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.417-421
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric ceramics for LTCC (Low-Temperature Cofired Ceramic) multilayer piezoelectric actuator, PMW-PMN-PZT ceramics using $0.2wt%\; Li_2CO_3$ and $0.25wt%\;CaCO_3$ as sintering aids were investigated according to the varation of PMW substution. Composition ceramics could be sintered at $900^{\circ}C$ by adding sintering aids. As the amount of PMW substitution increased, the crystal structure of PMW-PMN-PZT ceramics moved from tetragonal phase to rhombohedral phase gradually, and MPB(Morphotrophic Phase Boundary) region appeared at 2 mol% PMW substitution. At the sintering temperature of $900^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}r$), piezoelectric constant(d33) and Curie temperature(Tc) of 2 mol% PMW substituted PMW-PMN-PZT ceramics showed the optimal values of $7.88g/cm^3$, 0.58, 1002, 1264, 352 pC/N and $336^{\circ}C$, respectively, for LTCC multilayer piezoelectric actuator application.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권4호
• /
• pp.44-50
• /
• 2016

본 연구에서는 상변화물질(PCM)을 반강성 포장체를 구성하는 초속경시멘트 페이스트 주입재에 적용하기 위한 연구를 수행하였다. 반강성포장용 주입재의 아크릴레이트를 PCM으로 치환에 따른 총 6종류의 주입재 배합에 대하여 경화 전 후 특성을 실험을 통해 평가하였다. 아크릴레이트를 PCM으로 치환하여 유동성을 평가한 결과 본 연구에서 목표로한 유하시간 10~13초를 모두 만족시킬 수 있는 것으로 나타났다. 응결시간의 경우 PCM으로 치환하더라도 초속경 시멘트의 성능을 확보할 수 있는 것으로 나타났고, PCM 치환 60%이상의 경우 초결시간이 다른 배합에 비해 1~2분 빨리 발생되었다. 압축강도 및 부착강도의 경우 Plain 배합과 유사한 강도특성을 나타내었고, 본 연구에서 목표로 하는 압축강도 36MPa, 부착강도 2MPa를 모두 만족시켰다. PCM으로 치환한 배합은 아크릴레이트만을 사용한 배합에 비해 우수한 염소이온침투저항성을 나타내었으나, OPC수준에는 미흡하였다. 반강성포장용 주입재에 대한 물리 역학적 성능평가 결과, 이 연구의 범위내에서는 PCM 대체율 20% 수준이 효과적인 것으로 판단된다.

• 보존과학연구
• /
• 통권25호
• /
• pp.75-92
• /
• 2004

The conservation treatments of 10-storied pagoda in the temple of Kyoungchunsa is progressed favorably to come to the finish since 1995. Most of all, the important conservation treatments are stone crack, exfoliation and partial form modification. This pagoda has been made up a complicated structure constructed using 142 stones. Therefore, the stone crack and exfoliation have been occurred as very varied forms. Especially, the stylobate of the pagoda has 19 substitution stones of 48 stones, which is40% of modern stone substitution. It is supposed that there is serious weathering on the stones. The other stones, which are no substitution stones, have some kinds of weathering and so we carried out inside replenishment and partial outside reconstruction of crack stones using high molecular resin and substitution stone. The stone of each storey has also partial difference, but the condition of serious weathering on the whole. We can detect general degree through treatment of high molecule resin or distribution research of contaminated material on 10-storied pagoda in the temple of Kyoungchunsa. Especially, we are able to analyze general weathering degree and know details weathering of each storey or direction for the difference of replenishment quantity and different pattern of stone crack degree. Also, the distribution research will accomplish very important parts of examining environment effects and use as research data of cultural heritage conservation field.

• KIEAE Journal
• /
• 제15권1호
• /
• pp.139-146
• /
• 2015

This is an experimental study on the engineering characteristics of perforated reinforced concrete beams with shells. In the material matter of this study, the water cement ratio put 60%, the ratio of substitution of oyster shells to fine aggregate 30%. And in the structural matter, the form of opening put circle and square, the size of opening as the radius and the length of it changed from one to three times of the beam depth with a change presence and absence of reinforced steel around opening. All thirteen reinforced concrete beam tests composed one standard beam and twelve six beams with the circle and square opening were tested in shear strength under two points loading and compared and analyzed the characteristics of test beams under the same conditions one another. The results of the study showed as followed. 1) The initial crack load value of the opening test beams is similar the standard beam but the maximum load value decreased with increase in proportion of the opening size, in the square opening than the circle opening and in the absence than the presence of reinforced steel. 2) As the difference between the circle opening and the square opening beams is represented 2.17~9.8% in the maximum load value and the load capacity of the square opening suddenly decrease than it of the circle opening, it is judged because of the shortage of concrete section, the concentration of the stress in the corner of the square opening and material influence of shell substitution. 3) The failure figure such as the pattern of the crack and so on is represented brittle failure as the opening size is the bigger and the ratio of substitution is higher because of the lack material properties.

• Journal of Electrochemical Science and Technology
• /
• 제5권3호
• /
• pp.87-93
• /
• 2014

The fluorine-substituted $0.3Li_2MnO_3{\cdot}0.7Li[Mn_{0.60}Ni_{0.25}Co_{0.15}]O_{2-x}F_x$ cathode materials were synthesized by using the transition metal precursor, $LiOH{\cdot}H_2O$ and LiF. This was to facilitate the movement of lithium ions by forming more compact SEI layer and to reduce the dissolution of transition metals. The $0.3Li_2MnO_3{\cdot}0.7Li[Mn_{0.60}Ni_{0.25}Co_{0.15}]O_{2-x}F_x$ cathode material was sphere-shaped and each secondary particle had $10{\sim}15{\mu}m$ in size. The fluorine-substituted cathodes initially delivered low discharge capacity, but it gradually increased until 50th charge-discharge cycles. These results indicated that fluorine substitution gave positive effects on the structural stabilization and resistance reduction in materials.

• 대한금속재료학회지
• /
• 제56권11호
• /
• pp.822-828
• /
• 2018

P-type Ce/Yb-filled skutterudites were synthesized, and their charge transport and thermoelectric properties were investigated with partial double filling and charge compensation. In the case of $(Ce_{1-z}Yb_z)_{0.8}Fe_4Sb_{12}$ without Co substitution, the marcasite ($FeSb_2$) phase formed alongside the skutterudite phase, but the generation of the marcasite phase was inhibited by increasing Co concentration. The electrical conductivity decreased with increasing temperature, exhibiting degenerate semiconductor behavior. The Hall and Seebeck coefficients were positive, which confirmed that the specimens were p-type semiconductors with holes as the major carriers. The carrier concentration decreased as the concentration of Ce and Co increased, which led to decreased electrical conductivity and increased Seebeck coefficient. The thermal conductivity decreased due to a reduction in electronic thermal conductivity via Co substitution, and due to decreased lattice thermal conductivity via double filling of Ce and Yb. $(Ce_{0.25}Yb_{0.75})_{0.8}Fe_{3.5}Co_{0.5}Sb_{12}$ exhibited the greatest dimensionless figure of merit (ZT = 0.66 at 823 K).

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.434-439
• /
• 1997

It this paper, the piezoelectric and electro-induced strain properties of (P $b_{1-}$2x/3/B $i_{x}$ )[N $i_{1}$3/N $b_{2}$3/)$_{0.4}$( $Ti_{0.6}$Z $r_{0.4}$)$_{0.6}$] $O_3$ceramics (x=0, 0.005, 0.02) were investigated with the substitution of B $i^{3+}$, and the feasibility of the application for bimorph actuator was evaluated by measuring the dynamic properties of the piezoelectric bimorph fabricated with above ceramics. Dielectric constant was enhanced with the increase of B $i^{3+}$ substitution, and appeared the maximum value of 5032 at x=0.01 composition. Increasing the substitution of B $i^{3+}$, the electromechanical coefficient( $k_{p}$ , $k_{31}$ ) was increased up to the substitution of 0.5 mol% B $i^{3+}$, showed the value of 0.656, 0.439, respectively. The piezoelectric constant( $d_{33}$ $d_{31}$ ) had the highest value of 344, 825 with the substitution of 0.5 mol% B $i^{3+}$. The strain, generated by 60 Hz AC electric field, had the largest value of 1200($\times$10$^{-6}$ $\Delta$1/1) in the composition with the substitution of 0.5 mol% B $i^{3+}$. The dynamic properties of the bimorph actuator, fabricated with the composition substitution of 0.5 mol% B $i^{3+}$, showed the largest value of 325 $\mu$m at $\pm$150 V square pulse. square pulse.are pulse..

• 한국식품조리과학회지
• /
• 제23권1호통권97호
• /
• pp.41-49
• /
• 2007

The substitution effects of whey protein isolate(WPI) for egg in the preparation of sponge cake were determined by objective and subjective tests. Milk whey is drained from milk curd as a by-product of cheese manufacture. Whey protein is known as a good nutritional source and a functional material for many processed foods, especially baked goods. WPI contains above 90% whey protein. The specific gravity and viscosity of sponge cakes tend to be affected by WPI substitution. The cooking loss of sponge cakes with WPI substituted for egg(abbreviated as WPI cake) during oven baking was smaller than that made with egg(abbreviated as egg cake) and the specific loaf volume of WPI cake was larger than that of egg cake. The number of pores was highly increased and the size of pores was more uniformly and finely distributed in the cross section of WPI cake than those of egg cake, as observed by scanning electron microscopy(SEM). The hardness, gumminess and chewiness of WPI cake made with 10-20% WPI substitution were the lowest among all the tested cakes, including egg cake, thereby confirming the considerable improvement in their cake qualities. By the results of sensory evaluation, appearance, pore uniformity, softness, chewiness, moistness, flavor, mouth feeling, and overall acceptability of 10-20% WPI substitute cakes were evaluated as being significantly superior to those of all other cakes(p<0.05). These results support the better physicochemical characteristics and sensory evaluations of sponge cake prepared with 10-20% of WPI substitution for egg.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.41-44
• /
• 2004

층상구조를 갖는 점토광물은 층상의 이온교환자리에 친소수성 유기물을 화학적으로 치환할 수 있어 도자기 소지의 친소수성 정도를 조절할 수 있다. 본 연구에서는 Montmorillonite를 이온교환법으로 dodecylamine, hexadecylamine과 반응시켜 유기물이 점토광물에 복합화된 유기-점토 복합체를 조조하였다. 유기물이 점토광물 구조에 치환된 위치 및 층상구조의 간격변화는 FT-IR과 WAXD로, 수식된 유기물의 양은 TG-DSC, C/S 기기를 사용하여 조사하였다. 분석을 통하여 유기물은 층상에 선택적으로 치환하여 층간격을 증가 (12${\AA}{\leftrightarro}16{\AA}$) 시키는 역할을 하였고, 비교적 친수성을 보이는 MMT가 첨가된 가소제로 인하여 소수성으로 변하고 있음을 발견하였다.