• 한국실내디자인학회논문집
• /
• 제22권2호
• /
• pp.194-202
• /
• 2013

Commercial spaces are very sensitive in terms of trend and uniqueness, and many elements expressing space coexist together with brilliant ideas aiming to attract consumer attention and even induce sudden desire of purchase. Coexistence in space is expressed in various ways and out of those ways, representation by material is especially apparent. The application of material does not individually influence the expression of space, but the characteristics of multiple materials applied contribute to the distinction of space through mutual communication. This study intends to analyze how conversion is centered to express the distinction of space through materials communicated in space. The detailed study results are as follows. First, the conversion expression method of material resulted as 'Substitution', 'Contrast', 'Assimilation', 'Creation'. These four was divided and analyzed into 'Time', 'Space', 'Genre'. As a result of this analysis, such significances were shown as 'Contrast' in 'Time', 'Substitution' in 'Space', and 'Assimilation' in 'Genre'. Second, the conflict due to heterogeneity by conversion of 'Contrast' in 'Time' through past and current materials appeared to induce interest amongst consumers. Third, within 'Space', 'Substitution' of natural/artificial materials was noticeably applied. This is evaluated as a constructive way of expressing natural forms into artificial forms further intending to provoke attention and stimulate emotion. Fourth, in conversion through 'Assimilation' in 'Genre', rather than using materials only from other areas, synchronizing it by combining architectural materials is an effective method. Such results are thought to be a distinctive design method that draws attention of customers by communicating disparate materials in commercial space. Thus, the study results are expected to be utilized as an elementary resource in designing commercial space with character and high satisfaction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.233-238
• /
• 1998

For substitution for crushed sand, high strength aggregate for cement and concrete using coal ash as a main material was prepared and then compared its physical properties with those of crushed sand. Effect of mix proportion change of raw materials on the property of aggregate was checked. On the basis of these experimental results we are going to comprehend the reutilization of coal ash and utilize a basic data for judging possibility the substitution of crushed sand.

• Applied Microscopy
• /
• 제20권2호
• /
• pp.1-11
• /
• 1990

The ultrastructure of freeze-substituted Malpighian tubule cells of German cockroach after rapid freezing was compared to that fixed with conventional chemical fixation. As results, freeze-substitution proved to be the superior technique revealing much more structural details of the tissue cells. Especially, all kinds of membrane structures including infoldings, microfilament, microtubules and ribosomes were best preserved in this material.

• 월간산업보건
• /
• 통권69호
• /
• pp.37-41
• /
• 1994

작업환경관리에 있어서 유해물대책의 기본은 유해물을 한경중으로 발산시키지 않는 발산원에 대한 대책이다. 발산원을 포위(enclosure)하는 것은 원재료의 대체 (material substitution), 공법의 개량(process substitution)과 함께 발산원 대책으로서 우수한 방법이다. 이전에는 유해성이 적다고 여겨지는 원재료로 대체하는 일이 성행던 시기가 있었으나, 유해성이 적다고 믿었던 물질도 연구가 진척되면서 새로운 유해성이 발견되기도 하고, 또 직접적으로 인체에 섭취된 경우에 독성은 적더라도 대기중의 오존층을 파괴하는 성질을 알게 되었다든가 하는 등으로 최근에는 원재료의 대체가 대단히 어려워졌다. 그리고 공법의 개량은 기술적인 제약에 실행할수 있는 경우가 한정된다. 이에 비하여 발산원의 포위는 기술적으로도 용이하고 응용범위가 넓은 방법이라고 할수 있다. 발산원을 포위하는데는 밀폐구조의 설비가 이용된다. 이번 호에서는 포위하는 구체적인 방법을 실예와 함께 소개한다.

• Journal of Magnetics
• /
• 제1권1호
• /
• pp.19-23
• /
• 1996

In the present study, the $Sm_2Fe_{17}N_x$-type interstitial materials have been prepared by reaction between Nb-free or Nb-containing $Sm_2Fe_{17}$-type alloy and $N_2$ gas. Nitrogenation behaviour of the $Sm_2Fe_{17}N_x$-type material and disproportionation characteristics of the nitrogenated materials have been studied by means of differential thermal analysis (DTA) and thermopiezic analysis (TPA). Magnetic properties of the produced $Sm_2Fe_{17}N_x$-type interstitial materials were characterised in vibrating sample magnetometer (VSM) or thermomagnetic analyser (TMA). Epoxy-bonded or Zn-bonded $Sm_2Fe_{17}N_x$-type magnets were prepared, and their magnetic properties were investigated. It has been found that nitrogenation kinetics of the Sm2Fe17Nx-type alloy is improved significantly by the Nb-substitution for Fe in the alloy. The Nb-substitution is also found to enhance thermal stability of the $Sm_2Fe_{17}N_x$-type interstitial material. Hard magnetic properties of the interstitial materials produced from Nb-free orNb-containing alloy is high enough (intrinsic coercivity : over 7 kOe) for application as bonded permanent magnets. The good hard magnetic properties of the interstitial material are maintained in the epoxy-bonded magnet. Intrinsic coercivity of the Zn-bonded magnets is improved significantly as post-bonding annealing time increases.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제16권2호
• /
• pp.122-129
• /
• 1994

This study was undertaken to determine whether the addition of calcium sulfate to toothash material (Toothash : plaster of paris=2 : 1) would improve its stabilizing property without adversely affecting its osteoconduction. The radiographic and histologic examinations of bone response of this composite material was performed after 1-, 3-, 5-, 8-, and 12-week implantation in calvaria of rats. No sign of extensive inflammatory response was detected. No movement could be observed with this composite material. Creeping substitution was observed in the surgical site. The direct union between toothash and growing bone after 12 weeks of implantation was observed in the defect margin. We could observe this composite implant material is resorbing slowly as time is over.

• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.187-194
• /
• 2014

With environmental regulations continuously being strengthened internationally the need to control environmental pollution and environmental load is emerging in Korea. The purpose of this study is to seek methods or using waste cementitious powder as an alternative raw material for limestone through the optimization of raw material and to quantitatively analyze the resulting reduction of $CO_2$ emission in order to contribute to solving the issue of waste, which is the biggest issue in relation to construction and global warming. The results of the study, show that waste cementitious powder can be used as an alternative raw material for limestone at OPC level, but it was also found that mixing fine aggregate cementitious powder into waste cementitious powder significantly affected the substitution rate for limestone with waste cementitious powder and the reduction of greenhouse gas. In particular, when fine aggregate cementitious powder was used at a rate of 0~20%, the substitution rate for limestone and the reduction in the rate of greenhouse gas emission was significantly reduced. It is thought that a technique to efficiently separate and discharge the fine aggregate cementitious powder mixed in waste cementitious powder needs to be developed in the future.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2012년도 자성 및 자성재료 국제학술대회
• /
• pp.170-171
• /
• 2012

• 한국전기전자재료학회논문지
• /
• 제15권7호
• /
• pp.597-601
• /
• 2002

In this study, the structural, dielectric and piezoelectric properties of $Pb[(Ni_{1/3}Nb_{2/3})_x-(Mn_{1/3}Nb_{2/3})_{0.09-x}-(Zn_{0.505}Ti_{0.495)_0.91]O_3$ (x=0, 0.01, 0.02, 0.03, 0.04, 0.05) system ceramics were investigated to develop the composition ceramics for piezoelectric transformer. All the specimens were sintered at $1250^{\circ}C$ and its physical properties were measured, and the results are as follows : With increasing PNN substitution for PMN-PZT system, dielectric constant was increased and electro-mechanical coupling factor($k_p$) was increased to 0.62 at 5 mol% while mechanical quality factor(Qm) was decreased.

• Journal of Electrochemical Science and Technology
• /
• 제15권1호
• /
• pp.161-167
• /
• 2024

Despite the important role of manganese (Mn) in cobalt-free, Ni-rich cathode materials, existing reports on the effects of Mn as a substitute for cobalt are not consistent. In this work, we analyzed the performance of cathodes comprised of Li(Ni_1-xMn_x)O₂ (LNMO). Both beneficial and detrimental results occurred as a result of the Mn substitution. We found that a complex interplay of effects (Li/Ni mixing driven by magnetic frustration, grain growth suppression, and retarded lithium insertion/extraction kinetics) influenced the performance and was intimately related to calcination temperature. This indicates the importance of establishing an optimal reaction temperature for the development of high-performance LNMO.