• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.151-165
• /
• 2014

Korean traditional alcohol's growth gets declined after Makgeolli's boom and it's time to enter the takeoff stage using cup based on the characteristics of each alcohols in order to their globalization and quality improvement. For now, there are 3 features of Korean traditional alcohol's cup design development; subdivision, quality improvement, systematization. However, there's no product design case that reflect the characteristics of the alcohol from the planning phase. Therefore, it needs to establish process technology for storytelling and emotion based cup design. This research aims to extract the specification for cup design and to find out the visualization element of cup's shape and material by studying 5 senses and traditional alcohol's objective informations. Through the study, the elements that can maximize the specific traditional alcohol's marketability: cup's label, pattern, decorative element based on the storytelling like history and tale were found. As a result, those result can give a new export strategy by developing competitive design that has emotional element and storytelling from the traditional alcohol's characteristics in a situation of stagnant export of the small sized home-brewed liquor business.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.287-301
• /
• 2019

Preservation of the original form is the principle for conservation, management and utilization of cultural heritages. Thus, non-destructive analysis of these samples are important field of the conservation science. In this study, examined the applicability of nondestructive surface X-ray diffraction analysis (ND-XRD) for cultural heritage by materials (rock specimen, jade stone, pigment painted specimen, earthen artifact, metal artifact). In result, all type of sample is recorded suitable X-ray diffraction patterns for identifying mineral composition in case of surface condition with adequate particle size and arrangement. And diffraction pattern is reflected surface information than matrix. Therefore, ND-XRD is thought to be applicable not only mineral identification but also interpretation of manufacturing technique and alteration trend about layered sample (in horizontally or vertically). Whereas some exceptional diffraction patterns were recorded due to overlapping information on specific crystal planes. It caused by skip the sample treatment (powdering and randomly orientation). It could be advantageously used for mineral identification, such as preferred orientation of clay minerals. In contrast, irregular diffraction pattern caused by single crystalline effect is required careful evaluation.

• Journal of Chest Surgery
• /
• v.32 no.6
• /
• pp.543-548
• /
• 1999

Background: These days, lung volume reduction surgery (LVRS) is used as an alternative or a bridge operation to lung transplantation in treating patients with severe emphysema. The procedure can be used in patients with pulmonary nodules combined with severe emphysema. We report the results of 21 months follow up after lung volume reduction surgery in 7 cases including 2 cases of concurrent resection of pulmonary nodules. Material and Method: Seven patients with emphysema, including 2 cases of preoperatively suspected lung cancer were operated with LVRS technique between July 1996 and June 1997. Result: Postoperative mortality was observed in a case of squamous cell carcinoma in LUL with brain metastasis, detected at postoperative 13months. Average of 21months(19-25months) follow up was done for other cases without specific events. Conclusion: LVRS is a useful operation in the treatment of patients with severe emphysema, but further evaluation should be done about the long term results and precise criteria for patient selection. Simultaneous LVRS and tumor resection could be done in patients with emphysema with marginal reserve in the hope of maximizing postoperative lung functions.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.5 no.1
• /
• pp.118-132
• /
• 1999

To improve the effectiveness and efficiency of public health personnel training, we evaluated not only how appropriate the students felt the objectives, contents, methods and multimedia used in the train ing courses, but also how much the students accomplished the objectives and applied skill and knowledge to their own works. We selected 5 courses for the study : Tuberculosis control, Radiological technique, Public health information, Immunization, Mental health management courses used by Kirkpatrick's evaluation model. Reaction evaluation was carried out in final day by questionnaire. The results showed that all of them were very satisfied with educational input and curricula, learn Ing environment. Secondly, we measured the degree of learning achievement on pre and post training by questionaire of specific behavioral objectives. The degree of learning achievement was statistically higher just after training than pre training (paired t-test, p<0.01). Thirdly, evaluation of behavioral change to job was conducted to find out how much students applied skill and knowledge to their own job in 3 months after training by questionnaire. The results of behavioral change evaluation showed that 43.5% of the students who were performing job related with the training courses in 3 months after training applied the learned skill and knowledge to their own job quite well and 37.8% of them applied relatively well, therefore total 81.4% of them applied to their own job. And effectiveness of training for the above mentioned students showed that 41.9 % of them had improved or enforced their jobs after training, 35.5% of them had had no remarkable changes, and 15.7% had newly applied the learned skill and knowledge to their jobs. For evaluating the degree of usefulness of material predistribution in two weeks before training, we compared experimental groups with control groups. The results showed that general reactions are helpful but the degree of learning achievement is no discrepancy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.2
• /
• pp.306-312
• /
• 2013

The purpose of this study was to evaluate the physicochemical and sensory characteristics of white bread and added 2%, 4%, 6%, or 8% Hallabong powder. Dough pH of the control group was 5.65, and it decreased as increasing amounts of Hallabong powder were added. Also, total titratable acidity of dough significantly increased with increases in Hallabong powder. The fermentation power and dough expansion significantly increased with increasing incubation time; the control was highest at 98.67%. White bread pH, specific volume, and baking loss decreased significantly as with increased Hallabong powder content. The bread moisture content was not significantly different between samples, differing only from 40.61~41.83%. Water activity was 0.960 Aw in the 6% Hallabong powder mixture, which was the highest in samples. In color, lightness of crust significantly decreased with increased Hallabong powder content, whereas redness showed the reverse effect. Lightness of crumbs significantly decreased, with increased Hallabong powder content, whereas redness and yellowness showed the reverse effect. In texture, hardness and fracturability significantly increased, while resilience showed the reverse effect. In the sensory evaluation, citrus flavor, bitterness, astringency, and off-flavor significantly increased with increased Hallabong powder content, and the control sample showed the highest score in color, flavor, softness and overall acceptability. The 2% and 4% samples showed more than average scores. Based on these results, Hallabong powder could be considered a functional material. The optimum amount of Hallabong powder to add for baking bread would be 2~4%.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.3
• /
• pp.233-244
• /
• 2006

Of many volatile organic detergents for metals, benzine(CAS No. 8030-30-6), of which the toxicity has not yet been proven, has been used as an alternative of the halide compounds in the consideration of toxic effects, global warming and the destruction of ozone layer. In order to evaluate the effects of the benzine on human body by investigating the subchronic inhalation toxicity, to obtain the basic data for establishing the criteria of exposure in working environments and to classify the hazardousness in compliance with the Industrial Safety and Health Act by evaluating the hazardousness, repeated inhalation exposure test was carried with SD rats. The rats were grouped by 10 females and males each. The repetitive inhalation exposures were carried out at 4 levels of concentration of 0 ppm, 60 ppm, 300 ppm, and 1,500 ppm, for 6 hours a day, 5 days a week, for 13 weeks. The results are described hereunder. 1. No death of the animals of the exposed and controlled groups in the test period. Not any specific clinical symptoms, change in feed intake quantity, abnormality in eye test, or change in activity were observed. 2. In the 300 ppm and 1,500 ppm groups, weight reduction in the female groups and weight increase of liver and kidney in the male groups compared with control group were observed with statistical significance(p<0.05). 3. In the blood test, the HCT increased in the male 300 ppm group and the number of hematocyte increased, MCV and MCH decreased in the male 1,500 ppm group. In the female 1,500 ppm group, the HB decreased and the distribution width of the hematocyte particle size increased. In the blood biochemistry test, the TP in the male 1,500 ppm group and the LDH in the female 1,500 ppm group were increased with statistical significance(p<0.05). 4. Under the test conditions of the present study with SD rats, the NOEL was evaluated to be from 60 ppm to 300 ppm for both male and female groups. By extrapolation, the NOEL for human who work 8 hours a day was evaluated to be from 128 ppm to 640 ppm 5. Since the NOEL evaluated in this study do not exceed 60ppm(0.184 mg/L) the test material does not belong to the classification of the hazardous substance "NOEL${\leq}$0.5mg/L/6hr/90day(rat), for continuous inhalation of 6hours a day for 90 days" nor to the basic hazardous chemical substance class 1(0.2 mg/L/6hr/90day(rat) defined by the GHS which is a criteria of classification and identification of chemical compounds. However, considering the boiling point($30-204^{\circ}C$), flashing point($-40^{\circ}C$), vapor pressure(40 mmHg), and the inflammable range(1.0 - 6.0 %), sufficient care should be taken for handling in the safety aspects including fire or explosion.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.209-222
• /
• 1997

Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.3
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.1
• /
• pp.60-70
• /
• 2013

This study focused on analyzing classification system, technique methods, quality levels of periodic amendment characteristics in planting of standard specification. Through analyzing the above and comparing with foreign case study, this study suggests the improvement directions. The results improvement directions are as follows. 1. Many kinds of new construction were set up through the amendments of Landscape Standard Specification, but there are still needs to combine some construction categories because of mismatches between upper and lower categories. 2. Although the Landscape Standard Specification was revised to be more concrete, the contents there remains an ambiguous expression. So, standard specification is needed to revise a depth of earth ball or strength of support materials and quantify collect period of topsoil and application time. In addition, standards about following supervisor's instruction should be more detailed or deleted. 3. The standard specification has not been specified despite enactment and amendments reflecting the periodical paradigm and the needs of users, so it is still needed to revise. In addition, quality levels, planting periods, size of earth ball and performance criteria of tree materials are needed to revise. Each specific classification and construction methods were made by amendments of standard specification, but some standards are not clear and concrete. Therefore, the standard specification is needed to revise the classification system, technique methods, and problem deduction of quality levels and proposal of improvement. This study will be reference material when Landscape Standard Specification is revised.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.238-242
• /
• 2016

The effect of the alkali, alkali earth metal elements on selective catalytic reduction(SCR) catalyst deactivation behavior were investigated in terms of microstructure, surface area, pore volume and De-NOx test. Poisoned SCR catalyst were manufactured by injection of $K_2CO_3$, $Na_2CO_3$, $Ca(CH_3COO)_2{\cdot}H_2O$, $C_4H_6MgO_4{\cdot}4H_2O$, $H_3PO_4$ solutions in the new SCR catalyst at $350^{\circ}C$ for 6 hours. New and poisoned catalysts surface were similar. But specific surface area, pore volume decrease from Na, Mg, K, Ca, P compared to new SCR catalyst. Especially, Na poisoned catalyst surface area and pore size extremely decreased by $10.20m^2/g$, $0.061cm^2/g$. De-NOx test results of new and poisoned catalysts at $150{\sim}450^{\circ}C$ indicated that alkali metal (K, Na) poisoned SCR catalysts have the lowest De-NOx efficiency, alkali earth metal poisoned SCR catalysts (Ca, Mg) De-NOx efficiency are higher than alkali metal poisoned SCR catalysts. P poisoned SCR catalyst De-NOx efficiency is similar new SCR catalyst. It were considered that physical deactivation of SCR catalyst was affected by SCR catalyst surface area and pore volume change.