• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.267-268
• /
• 2010

In order to investigate the applicability of bottom ash as a source material in alikali activated mortar, experimental studies on the effect of the constituents in alkali activated mortar were performed in terms of workability and strength.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.130-137
• /
• 2003

The pipe of CFRP for bicycle frame is designed and made for light weight of bicycle and then its suitability to bicycle frame is verified by comparing the other material i.e. steel, Cr-Mo steel, Al alloy pipe for bicycle frame. The pipe of CFRP is laminated to [0/$\pm$45]$_T$ and made by tape winding method and then its degree of light weight is evaluated by comparing the other pipes which is made by steel etc.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.251-253
• /
• 2011

• The Microorganisms and Industry
• /
• v.20 no.2
• /
• pp.46-48
• /
• 1994

The aim of the sutdy is to collect a variety of wild yeasts from different regions in Korea and in different seasons and to account for the natural patterns of regional and seasonal variation that they display. From the specimens collected in this study, more useful strains are expected to be discovered, which can be cultivated and utilized fro industrial development. The study attempts to determine the degree to which utilizable yeasts can be applied in brewing, confectionary, baking, the manufacture of medicine, and as feed yeast. Such findings would contribute not only to the development of academic research, but would also be important in obtaining raw material that can be applied in our daily lives and in industrial development in response to the demands of the times.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.533-538
• /
• 2004

Rolling Stock life cycle can not provide weakness of environment due to the absence DB on about environment information for contaminant, expense analysis on each step which consists of raw material-design-manufacture-running-waste step. In order to estimate environmental impacts on LCA for rolling stock system, scientifically and internationally fair standards of assessment method for pursuing environmental friendly in environment regulation policy, application of LCA system is proposed and introduced in the present paper.

• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.165-175
• /
• 1996

the process of strip twisting is practiced for the manufacture of some commercial parts such as elements for tube type line mixers. A thin metal strip with rectangular cross section is twisted thru an angle greater than 180。. Initial geometry is altered in to a complex one with dimen-sional changes. In practice several tryouts are necessary to obtain required dimensional accu-racies. A simple analysis model is proposed to predict the dimensional changes forming torque and axial force.

• Design & Manufacturing
• /
• v.16 no.3
• /
• pp.9-15
• /
• 2022

In order to reduce the manufacturing costs of the glass lens, it is necessary to manufacture a lens using a UV curable resin or a thermosetting resin, which is a curable material, in order to replace a glass lens. In the case of forming a lens using a thermosetting material, it is necessary to form several lenses at once using the wafer-level lens manufacturing technologies due to the long curing time of the material. When a lens is manufactured using a curable material, an error in the shape of the lens due to the shrinkage of the material during the curing process is an important cause of defects. The major factors for these shape errors and deformations are the shrinkage and the change of mechanical properties in the process of changing from a liquid material during curing to a solid state after complete curing. Therefore, it is necessary to understand the curing process of the material and to examine the shrinkage rate and change of physical properties according to the degree cure. In addition, it is necessary to proceed with CAE for lens molding using these and to review problems in lens manufacturing in advance. In this study, the viscoelastic properties of the material were measured during the curing process using a rheometer. Using the results, Rheological investigation of cure kinetics was performed. At the same time, The shrinkage of the material was measured and simple mathematical models were created. And using the results, the molding process of a single lens was analyzed using Comsol, a commercial S/W. In addition, the experiment was conducted to compare and verify the CAE results. As a result, it was confirmed that the shrinkage rate of the material had a great influence on the shape precision of the final product.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.10
• /
• pp.1571-1583
• /
• 2008

The study aimed to investigate the actual condition of working clothes in the Changwon National Industrial Complex and to analyze the industrial workers' satisfaction with and preference to the working clothes in terms of the clothing performance and work motion factors. 1 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock industries located in the industrial complex were selected as the subject firms. Approximately 900 workers responded to the questionnaire designed for the research and the results derived from the research were as follows. (1) The subject employees were divided into 4 work groups, i.e. the $1^{st}$ work group: managerial, general affairs, sales, production planning; the $2^{nd}$ group: quality assurance, material planning and distribution, product inspection; the $3^{rd}$ group: electric, facilities, machinery, vehicles; and the $4^{th}$ group: cutting, pressing, rolling, welding and coating. (2) The significant work environmental factors considered by all work groups were air ventilation, noise and dust factors and in particular, the most dissatisfied factors evaluated by manufacture workers were insulation, noise, dust and vibration. (3) According to the employees' work motion evaluation, the work motion diversity and frequency increased in proportion to the degree of work intensity. Besides, manufacture workers more frequently wore the working clothes even during the off-duty hours comparing to the evaluation of the other work groups. (4) The most important clothing performance factors considered by manufacture work groups were perspiration absorption, stretch, air permeability, tactile sense softness, soil proof in order.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.3
• /
• pp.550-565
• /
• 2016

The size of Korean and global cosmetic industry market are consistently growing and the domestic cosmetic industry's rate of total production increase is higher than GDP in Korea. In addition, the Korean Wave has strengthened not only this phenomenon but also the increase of exports. For these reasons, the purpose of this paper is to analyze Korean cosmetic industry regarded as a new growth engine. For this study, Porter's Value Chain theory, Mudambi's Smile of Value Creation, Cosmetic GMP by ISO, and the production process on cosmetic industry are used as tools. As a result, Korean cosmetic industry comprises five nodes value chains: R&D, Raw Material Manufacture, Container Manufacture, Cosmetic Manufacture, and Marketing. And then, based on this result, the spatial analysis is conducted to identify spatial distribution characteristics of each node.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.30-36
• /
• 2002

This research was conducted to investigate the feasibility of using deinked pulp of white ledger(DIP) for the manufacture of high quality premium tissue. The three types of tissues were prepared using the softener treated bleached DIP, softener treated mixed pulp of unbleached DIP and virgin pulp, and untreated mixed pulp of bleached DIP and virgin pulp, respectively, and their tensile index. softness, and brightness were measured and compared. The bulk and surface softness increased only slightly by the addition of softener(0.2% mineral oil) into the bleached DIP. The tensile index was decreased by 15∼30%, and the brightness was the range of 86% to 87% ISO. The softener(0.2∼0.8% mineral oil or dialkyl imidazoline) treatment of mixed pulp of unbleached DIP and virgin pulp Improved the bulk and surface of tissue considerably. However, the brightness was low as 85% ISO or below. Although the softness of the tissue made from bleached DIP blended with virgin pulp was the lowest among three types of tissues evaluated, its tensile index was the highest and brightness was 87∼88% ISO. Based on the results, it may be predicted that the bleached DIP blended with virgin pulp is the best raw material for the manufacture of high quality premium tissue if softener treatment is applied to mixed pulp, because the softness can be improved by the addition of softener. In general, the softness of tissue was improved with the increase in the amount of softener: However, the tensile index inversely proportional to the amount of softener added. Dialkyl imidazoline was more effective than mineral oil with respect to the improvement in softness, even though the loss in tensile index was severe with the treatment of dialkyl imidazoline.