• Food Science of Animal Resources
• /
• v.23 no.2
• /
• pp.122-127
• /
• 2003

A surimi like material was made from fresh pig hearts and used to manufacture emulsion-type sausages for the improvement of quality characteristics. The heart muscles were diced and frozen at -60$^{\circ}C$ until processed. Then, the frozen diced heart muscles were thawed, chopped, filtered, and washed to extract myofibrillar proteins. The residue was centrifuged to take a surimi-like material. Emulsion-type sausages were made different levels of surimi-like material(5∼15%) and compared to the control. Cooking loss(CL, %) and water-holding capacity (WHC, %) were measured on raw meat batter, whereas shear force, hardness, color and panel test were measured after cooking. The addition of the surimi-like material up to 15% level in the sausage formulation reduced CL and increased WHC, as compared to the control. Shear force and hardness values of the control had the highest value, however sausages containing 15% surimi-like material had the lowest value(p<0.05). Increased surimi-like material became darker in color. Although no differences in panel scores of flavor and off-flavor were observed, panellists prefer to select sausages having 15% surimi-like material(p<0.05). These results indicated that a surimi-like material, which was a myofibrillar protein extracted from pig hearts, could be used to manufacture emulsion-type sausage up to 15% to improve cooking yield and textural characteristics without color and flavor defects.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.397-400
• /
• 2007

Recently, rheology forming technology has been interested in industrial and academic for light weight materials and to solve environmental issues. In this study, the rheology material production equipments were used to be made spiral shape by special design. And the experiment variables established stirring time 0 $\sim$ 1200 sec, stirring velocity 0 $\sim$ 100 rpm and several material temperature of semi - solid states. The rheology materials were made for established experiment conditions then measured mechanical properties. Sequence-production equipments were appended to fabrication system of rheology material for make rheology materials continually. Therefore, the development of sequence-production equipments were demanded for fine grains and for uniform globule shape rheology materials by a specially designed spiral stirrer machine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.260-260
• /
• 2009

In high-efficiency crystalline silicon solar cell, If high-efficiency solar cells are to be commercialized, It is need to develop superior contact formation method and material that can be inexpensive and simple without degradation of the solar cells ability. For reason of plated metallic contact is not only high metallic purity but also inexpensive manufacture. It is available to apply mass production. Especially, Nickel, Copper are applied widely in various electronic manufactures as easily formation is available by plating. Ni is shown to be a suitable barrier to Cu diffusin as well as desirable contact metal to silicon. Nickel monosilicide has been suggested as a suitable silicide due to its lower resistivitym lower sintering temperature and lower layer stress than $TiSi_2$. In this paper, Nickel as a seed layer and diffusion barrier is plated by electroless plating to make nickel monosilicide.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.276-276
• /
• 2009

Solar cells has been studied mainly the high efficiency and lower prices. Using recycling wafer as a way to realize their money in it, there is a way to manufacture a solar cell substrate. How to play the recycling wafer, CMP(Chemical Mechanical Polishing) and remelting process is the complex and the expensive equipment. However, using the Micro-Blaster, the process easier, and cheaper prices. Micro-Blaster confirmed that the remaining amount of material left after the process recycling wafer surface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.988-992
• /
• 2002

Ultrasonic machining technology has been developed over recent years for the manufacture of and quality-assured precision parts for several industrial application such as optics, semiconductors, aerospace, and automobile application. The past decade has seen a tremendous in the use of ceramics in structural application. The excellent thermal, chemical and wear resistance of these material can be realized because of recent improvements in the overall strength and uniformity of advanced ceramics. Ultrasonic machining, in which abrasive particles in slurry with water are presented to the work surface in the presence of an ultrasonic-vibrating tool, is process which should be of considerable interest, as its potential is not limited by the electrical or chemical characteristics of the work material, making it suitable for application to ceramics. This paper intends to further the understanding of the basic mechanism of ultrasonic machining for brittle material and ultrasonic machining of ceramics based in the fracture-mechanic concept has been analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.130.1-130.1
• /
• 2011

Nowadays, the number of PV module corporation is increasing due to demand growth of silicon solar module. However almost study of module is research about increasing of efficiency for it. This study is evaluation and development for process of module using the silicone encapsulation material instead of existing EVA sheet. We are changed adding material ratio on silicone and thickness of silicone. So we get better efficiency than EVA sheet through the evaluation for silicone liquid and modulation. Also, we are test after establishing manufacture system being able to quicker than existing modules line. The result of EVA sheet is average 207.47W and silicone material is 211.32W so we think that silicone is better than EVA sheet.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.199-205
• /
• 2002

This paper presents a numerical technique to analyze wear life of automotive disk brake pad, where FFT-FEM method is adopted to determine the transient temperature distribution of the disk surface. A specimen ova frictional material is tested on a small scale brake dynamometer to find the dependency of the wear rate on temperature change, from which and the temperature analysis results, given the wear test mode, wear behavior of the pad material fur the vehicle can be predicted. Numerical examples show the predicted wear life of the vehicle coincides with the manufacture's recommended time interval for replacing the pads.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.69-70
• /
• 2006

A detailed Investigation of cell structure and electrical characteristic in chalcogenide-based phase-change random access memory(PRAM) devices is presented. We used compound of Ge-Sb-Te material for phase-change cell. A novel bottom electrode structure and manufacture are described. We used heat radiator structure for improved reset characteristic. A resistance change measurement is performed on the test chip. From the resistance change, we could observe faster reset characteristic.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.339-344
• /
• 2000

The purpose of this study is to evaluate qualities of lightweight aggregate for structural concrete according to mixing proportions, pelletizer condition, sintering condition and to choose the suitable main and sub material. Main material used paper sludge ash(PSA) and sub material used clay, fly-ash and paper sludge. The aggregates are sintered after granulating at the various condition. As the result of test, quality difference of aggregate showed clear according to the mixing proportions and sintering conditions. It was possible to manufacture lightweight aggregate for structural concrete that dry specific gravity was ranged about 0.9 to 1.4 also the test results of the aggregates showed same physical properties compared with abroad product as 10% granules crushing value from 5 or 10% and absorption percentage from 10 to 20%.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1406-1409
• /
• 2003

There is a great demand for reducing the amount of material used in mass-produced plastics parts, for material cost constitutes a large percentage of the total cost of 60%. It may be noted that the price of plastics is directly rotated to the price of petroleum. Material reduction therefore decreases the amount of oil needed for the manufacture of plastics and thus help conserve this natural resource. Therefore microcellular foaming process(MCPs) was studied for solving this problems alternatively in 1980's at M.I.T Until now in MCPs carbon dioxide gas was mainly used for microcellular foaming. Besides, Talc was used for reducing the price of plastics. Consequently, we must certificate using the Talc in MCPs according to contents of the Talc.