• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1185-1194
• /
• 2011

This study was carried out to estimate carbon emission using LCA (Life Cycle Assessment) and to establish LCI (Life Cycle inventory) DB for lettuce production system in protected cultivation. The results of data collection for establishing LCI DB showed that the amount of fertilizer input for 1 kg lettuce production was the highest. The amounts of organic and chemical fertilizer input for 1 kg lettuce production were 7.85E-01 kg and 4.42E-02 kg, respectively. Both inputs of fertilizer and energy accounted for the largest share. The amount of field emission for $CO_2$, $CH_4$ and $N_2O$ for 1 kg lettuce production was 3.23E-02 kg. The result of LCI analysis focused on GHG (Greenhouse gas) showed that the emission value to produce 1 kg of lettuce was 8.65E-01 kg $CO_2$. The emission values of $CH_4$ and $N_2O$ to produce 1 kg of lettuce were 8.59E-03 kg $CH_4$ and 2.90E-04 kg $N_2O$, respectively. Fertilizer production process contributed most to GHG emission. Whereas, the amount of emitted nitrous oxide was the most during lettuce cropping stage due to nitrogen fertilization. When GHG was calculated in $CO_2$-equivalents, the carbon footprint from GHG was 1.14E-+00 kg $CO_2$-eq. $kg^{-1}$. Here, $CO_2$ accounted for 76% of the total GHG emissions from lettuce production system. Methane and nitrous oxide held 16%, 8% of it, respectively. The results of LCIA (Life Cycle Impact assessment) showed that GWP (Global Warming Potential) and POCP (Photochemical Ozon Creation Potential) were 1.14E+00 kg $CO_2$-eq. $kg^{-1}$ and 9.45E-05 kg $C_2H_4$-eq. $kg^{-1}$, respectively. Fertilizer production is the greatest contributor to the environmental impact, followed by energy production and agricultural material production.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.1
• /
• pp.85-94
• /
• 2007

To determine the influence of food waste compost (FWC) application on paddy soil, FWC was applied to the paddy soil and then compared with farmer's practice as to the effects on rice and soil environment. Initially, pig manure compost (PMC) had high content of phosphorus ($15g\;kg^{-1}$) and potassium ($23g\;kg^{-1}$), while FWC had high content of total nitrogen ($13g\;kg^{-1}$) and salinity ($18.5g\;kg^{-1}$). Comparison was also made between chemical fertilizer and FWC use as a trial in the paddy field under the clay loam and sandy loam soil. In the panicle formation stage, chemical fertilizer application was proper in clay loam while PMC application was proper in sandy loam. However, chemical fertilizer produced higher yield compared to compost treatment, both on clay loam and sandy loam with 20~25% and 17~19%, respectively. The lower yield in sandy loam maybe due to slow mineralization of compost such that the crop did not effectively use it. Organic matter content in paddy soil after experiment was higher in FWC and PMC plots compared to that in chemical fertilizer plots. But the other soil properties were comparable. Therefore, the FWC compost had little effect on soil when it use as a trial in paddy field. Likewise, after the application of FWC as a trial, analysis of nitrate nitrogen and ammonium nitrogen in the surface water and 60 cm depth of paddy soil water nine days after planting was done. Results revealed that concentration of ammonium nitrogen was similar to irrigation water while nitrate nitrogen concentration was not detected, and hence did not contribute to water pollution. It is concluded that the application of FWC in the paddy field had not affected on environmental pollution in the paddy field. But its use as compost during rice culture reduced yield quantity. Such study should include selection of compost material, amount and method of compost application.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.248-255
• /
• 2021

This study was conducted to obtain basal information for the development of perilla cultivars with improved quality. The F₇ population of recombinant inbred lines (RILs) from a cross between the parents of Daesil for seeds and Ipdeulkkae1 for vegetables was used as the material. We evaluated several agricultural characteristics and seed quality. Variations were observed in most of the measurements; for example, stem length (ranging from 66.0 to 150.0 cm), number of branches (from 5 to 23), flower cluster length (ranging from 5.1 to 10.5 cm), number of flower clusters (from 17 to 131), a-linolenic acid content (from 54.2 to 64.1%), and functional compound content (rosmarinic acid 869.5~3,508.1 ㎍/g; luteolin 47.4~864.3 ㎍/g; apigenin 57.1~296.7 ㎍/g) all showed variation. Significant correlations between stem length and the number of branches (0.561) and number of branches versus number of flower clusters (0.638) were detected in the RIL F₇ population. Most agricultural characteristics and seed qualities showed a normal distribution with large variation, and transgressive segregation was observed in many descendants with characteristics to those of their parents. Daesil/Ipdeulkkae1 RIL F₇ populations could be useful for future QTL analysis as well as for intermediate breeding lines for high-quality perilla cultivars.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.629-636
• /
• 2021

The purpose of this study was to identify the effects of mammo pad made of different kinds of materials on the reduced inconvenience and compression pains of patients to examine plausible interchangeability of existing pads made of single kind of material, and to examine the changes in pains of patients taking mammography and various factors therein. The high-hardness and highly-elastic mammo pressure pads, capable of replacing existing mammo pad of "H" company, were manufactured, and the display quality of mammography obtained from respective mammo pad were compared to each other to appraise the availability of manufactured mammo pad. In addition, 200 patients, who came to a general hospital in Seoul, were selected as subjects for the survey employing a questionnaire which was distributed to the subjects from December 2018 to March 2020 to identify the factors involved with the mammo pad of patients while taking mammography. The results of mammography obtained from both of the existing and newly manufactured mammo pad revealed appropriate display qualities fell within the range of clinical criteria. Besides, the factors associated with changing compression pains of patients taking mammography were analyzed wherefrom the general factors in the following order of age, height, and BMI index appeared, while the experiential and female factors appeared as in the following order: presence of menstruation, experience of child-birth, experience of breast feeding, menopause, grade of breast, shape of breast, and experience of mammography. In conclusion, the following factors comprising the age, experience of breast feeding, experience of mammography, and menopause rendered approximately 54% of power of explaining the degree of changing pains during mammography. Regarding the changes in compression pains while taking mammography, the increasing experience of mammography of patients rendered approximately 0.26 times more at the intermediate range of compression pains and approximately 0.14 times more at the range of severe pains.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.347-355
• /
• 2021

During the earthquake, for multi-story structure, if the first floor is soft, the deformation will concentrate on that floor causing a serious damage to the column members which might leads to the collapse of the whole structure like Piloti structure during the Pohang earthquake in Korea. According to the 2016 National Disaster Management Research Institute's "Investigation of Seismic Reinforcement and Cost Analysis of Domestic Non-seismic Buildings", the rate of seismic resistance of private reinforced concrete buildings was 38.3 %. Among them, it was reported that the seismic-resistance ratio of the two to five-story structures was less than 50 %. Accordingly, the government is trying to improve the seismic rate through support projects, but the conventional seismic reinforcement methods are still expensive, and emergency construction is difficult. Therefore, in this study, the field applicability was evaluated by improving the reinforcement method using Velcro, which was developed through the research project of the Ministry of Land, Transport and Maritime Affairs in 2014. In order to improve the performance of the Velcro reinforcement method, introducing the initial tension of Velcro using high foaming rigid urethane filling between the Velcro and concrete of the columns was applied. Additionally, an experiment was conducted to evaluate the ductility of Velcro specimen from the concrete confinement effect. As a result, the ductility of the Velcro specimen was improved compare to Normal specimen. However, the energy dissipation capacity of VELCRO2 is better than VELCRO1, yet the maximum ductility of those two specimens did not show a significant difference. Therefore, the improvement of the internal filler material is still needed to have a better maximum ductility.

• Journal of the Korean earth science society
• /
• v.39 no.6
• /
• pp.519-532
• /
• 2018

We investigated the effect of galactic plane toward molecular motion and kinematics in the northern filament (NF) of Orion Molecular Clouds Complex (OMC) using $^{12}CO$ (J=1-0) line. Observed data were from three areas including NF1, NF2, and NF3 in far-out order from galactic plane, for a total 270 hours by Seoul National University Radio Astronomy Observatory (SRAO) 6m telescope, with 2arcmin spatial resolution. galactic plane and OMC NF were connected to each other along the magnetic field at a density of 3% for $^{12}CO$ (J=2-1) and 9% for the case of dust. $^{12}CO$ (J=1-0), $^{12}CO$ (J=2-1), and interstellar dusts were distributed uniformly in NF3, but only in certain regions with relatively high density in NF1 and NF2. NF showed a single structure, partial shrinking motion in NF1, and rotational motion at the bottom of NF2, and spiral rotation associated with magnetic field only in NF3. The position-velocity analysis showed that the materials including $^{12}CO$ (J=1-0) could flow toward galactic plane along NF2 and NF3. However, there was no clear cause for the material to flow toward galactic plane in this result. Further detailed observation for rotational motion at the top of NF1 and NF2 might help to confirm it.

• Journal of Life Science
• /
• v.29 no.3
• /
• pp.332-336
• /
• 2019

Obesity is associated with an increased risk of many diseases including type 2 diabetes mellitus, hypertension, and hyperlipidemia. The flowers of Chrysanthemum boreale have been used as traditional medicines for the treatment of diseases such as obesity and type 2 diabetes mellitus. This study aimed to evaluate the effect of C. boreale Makino flower essential oil (CFEO) on adipocyte differentiation using preadipocyte cell line 3T3-L1. CFEO at concentrations between 0.1 and $5{\mu}g/ml$ did not affect 3T3-L1 cell viability. A CFEO concentration of between 0.1 and $1{\mu}g/ml$ significantly inhibited lipid accumulation during MDI-induced differentiation in 3T3-L1 cells in a dose-dependent manner, reaching a maximal level at $1{\mu}g/ml$ ($28.94{\pm}2.01%$; approximately 30% of control treated with MDI alone). Western blot analysis revealed that CFEO concentrations between 0.1 and $1{\mu}g/ml$ suppressed the activations of three adipogenic transcription factors in the MDI-stimulated 3T3-L1 cells: peroxisome proliferator-activated receptor ${\gamma}$; CCATT/enhancer binding protein ${\alpha}$; and sterol regulatory element binding protein-1. Moreover, the expressions of lipogenic enzymes, acetyl-CoA carboxylase, and fatty acid synthase were also inhibited by treatment with CFEO between 0.1 and $1{\mu}g/ml$. CFEO may therefore be a promising functional material for obesity prevention.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.134-151
• /
• 2014

This paper deals with a review of the structure and production techniques of the Dried-lacquer Amitabha Buddha statue enshrined in Geungnakjeon Hall of Simhyangsa Temple, located in Daeho-dong, Naju-si, Jeollanam-do, Korea. To achieve this goal, X-ray date and two rounds of field research were performed. The data collected were reviewed, and a sample peeled off from the damaged part was analyzed to investigate the structure and material of the background layer. The results revealed that the Simhyangsa Temple Buddha statue was an almost empty Dried-lacquer(Hyeopjeo) Buddha statue where wood core had not been framed and inserted in the statue. It was thus observed that considering that the clothes wrinkles clearly remained, the same one as the irregularity of the outer clothes wrinkles, the Dried-lacquer layer was lifted made in an almost complete shape in the process of forming the clay figure as the origin form. The statue was found to be diagonally incised from the top of the head to the back of the neck to remove the clay and wood core. But in other sites, no incision was confirmed. It was observed that on the site of the head where the incision was made, an adhesives(lacquer or paste) was used. In addition, the black eyes were impacted with beads and the ears, hands, bands, and knots were made of wood. These features are identically shown in the Dried-lacquer Amitabha Buddha statue from Seonguksa Temple, known as a work of the late Goryeo dynasty; the Seated Dried-lacquer Buddha statue in Okura Museum of Art in Tokyo, Japan; the Seated Dried-lacquer Amitabha Buddha statue from Jungnimsa Temple, know as a work of the early Joseon dynasty; and the Seated Vairocana Buddha statue in Bulhoesa Temple, the Seated Dried-lacquer Amitabha Buddha and the Seated Dried-lacquer Buddha statue from Silsangsa Temple. The analysis of the back layer demonstrated that the ground layer and the red lacquer were the production of the time. In particular, the bone ash used for the ground layer was also coated for the ground layer of Buddha statues as well as for the production of the lacquerware during the Goryeo dynasty. It was also found that gold mending was conducted more than twice even in modern times and that the layer of the production time was well preserved despite gold mending several times.

• Journal of Nutrition and Health
• /
• v.52 no.3
• /
• pp.250-257
• /
• 2019

Purpose: Aster glehnii (AG) and Aster yomena (AY) are medicinal plants that belong to the family Compositea and grow widely in Korea. Plants in the genus Aster have been used to treat snakebite wounds or bruises in oriental medicine. This study compared the effects of anti-oxidants and anti-adipocyte differentiation according to the species (the aerial parts of AG and AY). Methods: AG and AY were extracted using 70% ethanol (-E) and water (-W) at room temperature. The anti-oxidant activities were measured by total phenol contents (TPC), total flavonoid contents (TFC), DPPH and $ABTS^+$ assay. In addition, correlation analysis was performed for the anti-oxidant compounds and effect. The level of anti-adipocyte differentiation was assessed using an oil red O assay on pre-adipocytes. Results: AG-W showed higher TPC ($6.92{\mu}g/mL$) and AG-E presented higher TFC ($8.22{\mu}g/mL$) than the other extracts. Furthermore, AG-E exhibited higher radical scavenging activity in the DPPH and $ABTS^+$ assay ($IC_{50}$: 104.88 and $30.06{\mu}g/mL$). In the cytotoxicity assay, AG and AY extracts at concentrations less than $100{\mu}g/mL$ were non toxic. AG-W reduced the lipid accumulation of 3T3-L1 cells significantly after differentiation (70.49%) compared to the other extracts. Conclusion: These results show that the water extract of AG has anti-oxidant effects and reduces the differentiation of 3T3-L1 cells. Therefore, AG has utility as a functional food material for its anti-oxidant activities and ability to prevent lipid accumulation.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.273-278
• /
• 2019

The multi-layer insulating curtains used in the experiment was produced in six combinations using non-woven fabric containing aerogel and compared and analyzed by measuring heat flux and heat perfusion rates due to weight, thickness and temperature changes. Using silica aerogel, which have recently been noted as new material insulation, this study tries to produce a new combination of multi-layer insulating curtains that can complement the shortcomings of the multi-layer insulating curtains currently in use and maintain and improve its warmth, and analyze the thermal properties. The heat flux means the amount of heat passing per unit time per unit area, and the higher the value, the more heat passing through the multi-layer insulating curtain, and it can be judged that the heat retention is low. The weight and thickness of multi-layer insulation curtains were found to be highly correlated with thermal insulation. In particular, insulation curtains combined with aerogel meltblown non-woven fabric had relatively higher thermal insulation than insulation curtains with the same number of insulation materials. However, the aerogel meltblown non-woven fabric is weak in light resistance and durability, and there is a problem that the production process and aerogel are scattering. In order to solve this problems, the combination of expanded aerogel non-woven fabric and hollow fiber non-woven fabric, which are relatively simple manufacturing processes and excellent warmth, are suitable for use in real farms.