• Journal of the Korean Society of Safety
• /
• v.26 no.6
• /
• pp.54-63
• /
• 2011

Steel plate or FRP materials have been typically used for the seismic retrofit of civil infrastructures. In order to overcome the limitation of each retrofitting material, a composite material, which takes advantages from both metal and fiber polymer materials, has been developed. In the study herein, the composite retrofitting material consists of metal part(steel or aluminum) and FRP sheet part(glass or carbon fiber). The metal part can enhance the ductility and the FRP part the ultimate strength. As a preliminary study to investigate the fundamental mechanical characteristics of the metal-FRP laminated composite material this study performed the tensile test with various experimental variables including the number, the angle and the combination of FRP laminates. From the test results, both aluminum and steel-FRP laminate composite material showed increased fracture toughness. However, the angle and the kind of fibers should be carefully considered in conjunction with the expected loading conditions. In general, steel-FRP laminate composite showed better tensile performance in regards to the seismic retrofit purposes.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.137-143
• /
• 2016

The use of chemicals is increasing due to industrial advancement and diversification. In addition, the number of chemical accidents are increasing at the same time. A multifaceted effort in chemical accidents is needed for efficient prevention and countermeasures. This paper presents, under the current Act, a chemical accident case, including the material safety data sheet (MSDS) through the chemical accident prevention and measures for improvement with regard to research.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.30-35
• /
• 2003

Product liability(PL) law imposes the liability on manufacturer or wholesaler when the product defects cause harm to consumers of the products or any other parties in their lives, bodies, or properties. In Korea, the law of product liability was enforced in July 2002. In this study the Product Liability Response System of chemical products was developed by using Failure Mode and Effect Analysis(FMEA). For a case study peformed for N,N-Dimethylethylamine. First, product information was gathered through Material Safety Data Sheet(MSDS)and which considered as an instruction manual of chemical product. And an effect caused by product defects is analyzed by FMEA to get Risk Priority Number(RPN) which is calculated by multiplying of severity, occurrence, and detection of the defects. Then hazard was estimated quantitatively by RPN.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.75-80
• /
• 2008

The progressive die performs a work of sheet metal processes with a piercing, notching, embossing, bending, drawing, cut-off etc. in many kinds of pressing. Now a days, these processes have been evaluated as a advanced tooling method to increase the productivity and high quality assurance. The first step analyzing of die design is production part review, then the arrangement drawing of product design and strip process layout design should be done as a next steps with a FEM simulation for its problem solution. After upper procedure were peformed, it was started to make the die, then tryout and its revision of the die and product quality, safety, productivity etc. were done continually. For the all of these process, we mobilized the theory and practice of sheet metal forming, die structure, the function and activity of die components, and the others of die machining, die material, heat treatment and know‐how so on. In this study the features of representative are production part analyzing through the FEM simulation of bending area with a considering spring back problem by DEFORM.

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.55-62
• /
• 2012

Steel plate or FRP materials have been typically used for the seismic retrofit of civil infrastructures. In order to overcome the limitation of each retrofitting material, a composite material, which takes advantages from both metal and fiber polymer materials, has been developed. In the study herein, the composite retrofitting material consists of metal part(steel or aluminum) and FRP sheet part(glass or carbon fiber). The metal part can enhance the ductility and the FRP part the ultimate strength. As a preliminary study to investigate the fundamental mechanical characteristics of the metal-FRP laminated composite material this study performed the flexural fracture test with various experimental variables including the number, the angle and the combination of FRP laminates. From the aluminum-FRP composite tests no great increase in flexural strength and flexural toughness were observed. However, flexural toughness of steel-FRP laminate composite was increased so that its behavior can be considered in the retrofit design. In addition, the angle and the kind of fibers should be carefully considered in conjunction with the expected loading conditions.

• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.185-194
• /
• 2018

The purpose of this study was to understand the dental hygienist's perception of dental materials and to understand the safety status of harmful chemicals. The study was conducted from January to February 2015 for 250 dental hygienists working in Gwangju Metropolitan City. as a result, the degree of recognition of MSDS for dental materials was higher with age (P <0.05) and higher in dental hygienist (P <0.001) working at dental hospital. (P <0.001), and the factors affecting the perception of first aid treatment were positively correlated with experience of hazard education (P <0.001). Therefore, by understanding the MSDS awareness of dental materials by dental hygienists and the safety situation in the handling of hazardous chemical substances, we provide basic data for establishing proper recognition of safety in the handling of harmful chemical substances and developing educational programs to prevent accidents.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.287-298
• /
• 2013

Objectives: Workers who use chemicals are exposed to safety accidents and occupational diseases. Employers are required to provide workers with Material Safety Data Sheets (MSDSs) in order to prevent accidents and diseases related to chemicals. Thus, it is very important to offer reliable MSDSs. In this paper, we assessed the reliability of MSDSs for chemicals including formaldehyde. Methods: To evaluate MSDS reliability, we collected 14 MSDSs and bulk samples from the chemical industry. MSDS reliability was evaluated by the completeness of details. In order to evaluate the adequacy of the formaldehyde contents in a mixture, bulk samples were collected and analyzed by HPLC. The result of Globally Harmonized System (GHS) classification was confirmed by identifying physical chemical properties, toxicology information and ecological information. Results: The result of the evaluation of 14 MSDSs showed 76.29% average reliability on each item, especially 53.9% average appropriate rate on hazard risk classification. No chemicals failed to match between the content (%) in MSDSs and the result of analysis. Conclusions: To elevate MSDSs reliability, the certified education of MSDS drafters and reorganization of the MSDS circulation system is required.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.87-94
• /
• 2018

The study is aimed to analyze the MSDS awareness as per the properties, including general characteristics, of laboratory workers in university. It conducted the self-administered survey on the subject of 780 laboratory workers engaging in research activities in three university from February to May, 2017. Among them, it analyzed 686 cases except 94 of them, lacking content. As a result, education experience of MSDS, necessity of education, usage experience of MSDS, installation, comprehension, and accessibility showed a strategically significant difference in the recognition of MSDS. According to the categorical importance of MSDS, "the first aid measures" directly related to life was most significantly considered. It is estimated that it will contribute to prevention of safety accident by strengthening education on MSDS and increasing the level of awareness for laboratory workers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.41-52
• /
• 2022

Objectives: This study intends to review the impact on cleaning workers and suggest directions for improvement by reviewing the legal and institutional ways in which Article 86 Nos. 7 and 16 of the Enforcement Decree of the Occupational Safety and Health Act work on the maintenance and promotion of cleaning workers' health. Methods: The following laws and systems were reviewed and considered: First, the occupational safety and health legislation obligated or required to be applied to protect the health of cleaning workers; Second, the status of control of chemicals or mixtures used at cleaning sites through the Consumer Chemicals Product and Biocide Safety Control Act; Third, Control of consumer products according to foreign material safety data sheet related laws. Results: Legal and institutional measures necessary to protect the health of cleaning workers include the legal control of harmful substances to be controlled, work environment monitoring, and special health examinations. The application of the Consumer Chemicals Product and Biocide Safety Control Act does not satisfy the legal and practical level of health maintenance and promotion required by the Occupational Safety and Health Act, and the communication of chemical information is insufficient. Overseas, there are restrictions on the use of consumer products in the workplace without material safety data sheets. Conclusions: It is necessary to improve the system to ensure the health of workers handling consumer chemical products. The remaining laws and regulations exempted from the obligation to prepare material safety data sheets should be additionally reviewed.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.46-50
• /
• 2019

In this study, the strength stability of an LPG mini tank with a storage capacity of about 250 kg was analyzed by FEM. According to the results of the FEM analysis, it is preferable that the corner radius of the LPG mini tank having a storage capacity of 250 kg is designed to be 175 to 205 mm. Generally, the larger the corner radius of the end plate of the gas storage tank, the higher the safety of the strength, but the volume or capacity of the tank is reduced. Therefore, it is important to derive the optimum design data. Further, in order to securely design the strength of the gas tank, the thickness of the tank is designed to be thick. However, when the thick steel sheet is used, the material and the transportation costs are increased. The result shows that it is preferable to select the optimum thickness of the steel sheet from 4.5 to 5.5 mm. Using the level gauge type of column on the central axis of the gas tank, the safety strength of the LPG tank can be enhanced as much as twice, compared with the tank of the existing level gauge to measure the liquid level by piercing the side wall of the tank.