• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.437-440
• /
• 2004

The radiation-induced changes taking place in poly(vinylidene fluoride)(PVDF) exposed to $^{60}Co\;\gamma-ray$ irradiation were investigated in correlation with the applied doses. Samples were irradiated in air at room temperature by $^{60}Co\;\gamma-ray$ to doses in the range of 200 to 1000 kGy. Various properties of the irradiated PVDF were studied using nm, differential scanning calorimetry(DSC) and gel fraction. $^{60}Co\;\gamma-ray$ irradiation was found to induce changes in chemical, thermal, structural properties of PVDF and such changes vary depending on the radiation dose.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.87-87
• /
• 2010

Epoxy/mica has been used as the material of high-voltage rotator stator winding due to its high insulation performance, mechanical strength, and thermal stability. In recent years, however, it shows frequent changes in the load of generators and frequent automatic stops due to the significant increase in peak loads from the increase in the applied load of power facilities according to the introduction of advanced and high-technology equipments. Thus, it is necessary to develop new materials that highly develop the conventional insulation materials. Nanotechnology introduced in the present time has become an alternative plan that overcomes such technical limitations. In addition, the nano-scaled intercalation composite has been known as the material that represent excellent electrical, mechanical, and thermal characteristics compared to the conventional materials. This study investigated the dielectric dispersion and relaxation characteristics of the nanocomposite, which was fabricated by mixing epoxy matrix with nano-scaled intercalation mica and clay, according to changes in frequencies and temperatures.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.349-354
• /
• 2014

This study is a basic research for repair material production which manufactured a Cu repair coating layer on the base material of a Cu plate using kinetic spray process. Furthermore, the manufactured material underwent an annealing heat treatment, and the changes of microstructure and macroscopic properties in the Cu repair coating layer and base material were examined. The powder feedstocks were sphere-shaped pure Cu powders with an average size of $27.7{\mu}m$. The produced repair coating material featured $600{\mu}m$ thickness and 0.8% porosity, and it had an identical ${\alpha}$-Cu single phase as the early powder. The produced Cu repair coating material and base material displayed extremely high adhesion characteristics that produced a boundary difficult to identify. Composition analysis confirmed that the impurities in the base material and repair coating material had no significant differences. Microstructure observation after a $500^{\circ}C/1hr$. heat treatment (vacuum condition) identified recovery, recrystallization and grain growth in the repair coating material and featured a more homogeneous microstructure. The hardness difference (${\Delta}H_v$) between the repair coating material and base material significantly reduced from 87 to 34 after undergoing heat treatment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.363-366
• /
• 1998

Shuttered Co-Cr thin films have been developed continuously as one of the major candidates for high density recording media. In this study, Co-26at%Cr thin films with c-axis oriented h.c.p. structure prepared by a improved facing targets sputtering system. We find that the effect of microstructural changes of sputtered Co-Cr thin films on magnetic properties and changes of crystal orientation due to variation substrate temperature.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 1999년도 Asian Academy of Prosthodntics. Korean Academy of Prosthodontics
• /
• pp.77.2-78
• /
• 1999

• 패션비즈니스
• /
• 제19권4호
• /
• pp.109-119
• /
• 2015

A wide variety of fashion materials focus on good drape property and softness. Among the recently emerging materials, Neoprene that consists of laminated knit on both sides of foamed neoprene sheet seeks a unique appearance that is considerably deviated from the current flow. Diverse processing methods for the newly released material heighten the value in function and beauty among trends of fashion materials by enhancing the appearance, touch and material property. Laser-cutting technique is one of the processing methods that is consistently used in the textile area. This study aimed to find the basic materials for applicability of laser-cutting technique to clothing goods after consideration of the changes in material property and drape shape, and to furthermore enforce different pattern conditions to Neoprene material, one of the newly attractive materials in the fashion area. In this study, we applied laser-cutting technique to Neoprene material sample under different conditions of pattern appearance, size and distance, based on current evaluation and theoretical background of Neoprene material, fashion trend and laser-cutting technique. Drape property can improve and the drape direction could also be controlled by a wide variety of laser-cutting techniques applied to Neoprene materials that have uniquely different appearances from most other textiles. This technique could be applied to the design for diversification of Neoprene clothing goods in the future.

• 건축역사연구
• /
• 제30권3호
• /
• pp.33-44
• /
• 2021

San-ja is one of the main members consisting of the roof of traditional wooden buildings in Korea. In this study, the regional characteristics of the materials used in San-ja and changes of the materials over time were examined. To this end, 123 documents on the repair of wooden architectural heritage recorded since the 1950s were reviewed. It was found that there was a difference in the San-ja material by region because of the diversity in the conditions of material supply. For instance, bamboo was the most frequently used material in Jeollanam-do province because it was readily available. However, with the development of transportation and vehicle, the regional characteristics have disappeared. As a result, the material has been unified with bamboo now. This is because bamboo is specified as a representative material in the specification or the convenience of construction is prioritized. In addition, the social and economic conditions at the time of repair had an influence on the selection of the San-ja materials.

• 한국식품조리과학회지
• /
• 제27권1호
• /
• pp.63-73
• /
• 2011

Cabbage (Baechu) Kimchi in its truncated form was placed in four different packing materials, Ny/PE/LLDP, OPP/AL/PE, PP and PET, and quality changes were observed during storage. Changes in pH and total acidity showed an x-shaped cross-curve as pH decreased and total acidity increased during storage. PP tray showed the slowest change at $5^{\circ}C$ with time. The pH was initially 6.25, but decreased to 4.12~4.16 at 20 days, and total acidity showed a 4 to 4.8-fold increase after 20 days of storage compared to the initial value. During storage at $5^{\circ}C$, total bacterial count and lactic acid bacterial count rapidly increased after 4 days. The total bacterial quantity decreased after a period of time and there were differences according to packaging material; OPP/AL/PE packaging showed the most dramatic decrease. Change in microbial count mostly followed a similar pattern to that of total acidity for all packaging materials. Changes in the color of Kimchi liquid, when examined by color index in $L{\cdot}b$/a form, rapidly decreased over time, similar to pH. Small Ny/PE/PP and OPP/AL/PE packages of Kimchi were examined for changes in free volume inside the packaging. After 13 days of storage at $5^{\circ}C$, the volume was 243 mL, but storage at $20^{\circ}C$ resulted in a volume of 372 mL, a more than 1.5-fold increase in free volume. There were changes in the quality characteristics of small package Kimchi according to storage temperature and packaging material, and large changes in pH, total acidity, and microbial count were evident upon storage at $5^{\circ}C$ for 8 days, which was the optimum palatability period. Mostly, PP treatment showed the slowest quality changes upon storage at $5^{\circ}C$. However, due to small package Kimchi's fast consumption system, the appropriate choice of packaging material must consider the product's turnover ratio. Further, the varieties of small package Kimchi should be diversified according to different consumer preferences by offering Kimchi with different maturity levels. Further, since the leading consumer base ranges in age from the teens to thirties, the development of various products targeting such consumers is necessary.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.314-326
• /
• 2013

The purpose of this research is to analyze the effects of Dansam and Sappan wood extract to perform combination dyeing on silk fabrics, with respect to color changes, fastness (washing, dry cleaning, perspiration, rubbing and light fastness), and functionality (antibacterial activity and deodorization). Combination dyeing was performed by first combining Dansam with Sappan wood, then Sappan wood with Dansam, in these orders. Given the changes in the combination ratio, pre-mordant treatment was performed. Looking at the surface colors of each dye, Dansam generally produces YR color series, while Sappan wood produces YR, R, and RP color series. The effects of changing the order in which combination dying was performed on the surface colors were as follows. First, combination dyeing (A) was performed by using Dansam before Sappan wood, to produce YR and R color series. Then combination dyeing (B) was performed by using Sappan wood before Dansam, to produce YR, R, and RP color series. By visual inspections, more similar color changes of the combination dyeing were noticed with the post-dyeing material rather than the pre-dyeing material. Therefore, it was presumably confirmed that surface color changes of combination dyeing were greatly influenced by the post-dyeing color. Individual dyeing tests for fastness showed that Dansam was comparatively superior to Sappan wood, which demonstrated lower fastness to washing, dry cleaning, perspiration, and light, relatively. The fastness of combination dyed samples was shown middle, but similar fastness to the post-dye material, The fastness of (B) method was higher than (A) method in the washing and light fastness. This confirms that color fastness from combination dyeing was considerably influenced by the post-dye material. It was found that all dyed samples had a very high bacterial reduction rate of 99.9% and high deodorization rate of 95%.

• The International Journal of Costume Culture
• /
• 제6권2호
• /
• pp.83-92
• /
• 2003

This study aims to classify women's undergarments of the 20th century by periods, and to examine their characteristics. The research method consists of a literature study based on relevant documentary records and a demonstrative analysis of graphic data collected from each reference. The features of women's undergarments obtained from the study are as follows: First, silhouette changes of outer garments appear to influence the type and style of a new undergarment. Second, technological development results in a new type of undergarments. Third, the development of new material appears to influence functions and design of undergarments. Fourth, social changes including the development of sports affects the changes of undergarments. As seen so far, the form or type, material, and color in undergarment diversify when fashion changes become varied and rapid. As shown before the 20th century, the importance of undergarment's type, form, and function gradually reduces according to the changes of women's mind due to their social participation, although it still plays a role in correcting the shape of an outer garment based on the outer silhouette. The design also clearly shows the extremes of maximization and minimization of decoration.