• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.64-65
• /
• 2005

The structural and electrical properties of the films are investigated as a function of nitrogen/argon ratio at room temperature and at various deposition temperatures. The phase changes as $Ta_2N$ or TaN in the films were observed as nitrogen/argon ratio increases from 3% to 25%. The phase changes were associated with a change in the resistivity and TCR (temperature coefficient of resistance) of the films. TCR values of the films deposited at room temperature and different nitrogen contents were negative, and strongly decreased with the increase in nitrogen/argon ratio. The Ta2N films deposited at nitrogen/argon ratio of 3% show improved TCR values and thermal stability with increasing deposition temperature. The $Ta_2N$ films grown at nitrogen/argon ratio of 3% and the temperature of $200^{\circ}C$ showed a TCR value of -47 $ppm/^{\circ}C$, which is close to near-zero TCR in the range of deposition temperature.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.577-585
• /
• 2008

STATEMENT OF PROBLEM: The discoloration of anterior teeth restoration is one of the material problems demanding retreatment. OBJECTIVES: To evaluate the color stability and affecting factors on esthetic restorative materials when subjected to accelerated aging. MATERIAL AND METHODS: This study was conducted using porcelain disks (IPS Empress 2-glazed, IPS Empress 2-polished), direct restorative resin disks (SYNERGY Duo) and indirect restorative resin disks (Sinfony, TESCERA ATL). Accelerated aging was done by precipitating the specimens in 38.C distilled water and irradiating with xenon light, and the total irradiation was 397.98 KJ/mm. Color and microhardness change of the specimens were measured before accelerated aging and after 100 hours, 200 hours and 300 hours of accelerated aging, and Surface of the specimens were examined with SEM before and after 300 hours of accelerated aging. RESULTS: 1. After 300 hours' accelerated aging, a ${\Delta}E$ value was 3.3 or lower in IPS Empress 2-glazed, IPS Empress 2-polished and Sinfony. 2. After 300 hours' accelerated aging, gloss was lost and surface changes including microcracks were observed in TESCERA ATL and SYNERGY Duo, and color changes of them ranged between 3.58 and 6.40 ${\Delta}E$ units. 3. During 300 hours' accelerated aging, the microhardness of surface was increased by 3.21 - 19.64% in all kinds of composites resin. CONCLUSION: After 300 hours' accelerated aging, SEM images IPS Empress 2-glazed, IPS Empress 2-polished and Sinfony showed little morphological change and their color changes were considered to be clinically acceptable. And there was significant correlation between microhardness changes and color changes of composites (P < .05).

• Journal of Periodontal and Implant Science
• /
• 제52권1호
• /
• pp.3-27
• /
• 2022

Purpose: This study was conducted to evaluate and compare the effects of different graft materials used in alveolar ridge preservation on dimensional hard tissue changes of the alveolar ridge, assessed using cone-beam computed tomography (CBCT) scans. Methods: A systematic electronic search of MEDLINE and the Cochrane Central Register of Controlled Trials and a manual search were conducted from November 2019 until January 2020. Randomized controlled trials were included if they assessed at least 1 variable related to vertical or horizontal hard tissue changes measured using CBCT scans. After a qualitative analysis of the included studies, subgroups were formed according to the graft material used, and a quantitative analysis was performed for 5 outcome variables: changes in vertical alveolar bone height at 2 points (midbuccal and midpalatal/midlingual) and changes in horizontal (buccolingual) alveolar bone width at 3 different levels from the initial crest height (1, 3, and 5 mm). Results: The search resulted in 1,582 studies, and after an independent 3-stage screening, 16 studies were selected for qualitative analysis and 9 for quantitative analysis. The metaanalysis showed a significantly (P<0.05) lower reduction of alveolar ridge dimensions for the xenogenic subgroup than in the allogenic subgroup, both vertically at the midbuccal aspect (weighted mean difference [WMD]=-0.20; standard error [SE]=0.26 vs. WMD=-0.90; SE=0.22) as well as horizontally at 1 mm (WMD=-1.32; SE=0.07 vs. WMD=-2.99; SE=0.96) and 3 mm (WMD=-0.78; SE=0.11 vs. WMD=-1.63; SE=0.40) from the initial crest height. No statistical analysis could be performed for the autogenic subgroup because it was not reported in sufficient numbers. Conclusions: Less vertical and horizontal bone reduction was observed when xenogenic graft materials were used than when allogenic graft materials were used; however, the loss of alveolar ridge dimensions could not be completely prevented by any graft material.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1998년도 춘계학술발표회 초록집
• /
• pp.113-114
• /
• 1998

• 한국전산구조공학회논문집
• /
• 제20권1호
• /
• pp.19-28
• /
• 2007

이산화 된 구조물의 위상최적화 과정은 균일하게 분포된 재료 밀도의 위상으로 표현되는 초기 설계영역을 시발점으로 한다. 최적화 과정 동안 구조물의 위상은 고정된 설계영역 내에 주어진 최적화 문제를 만족시키는 방향으로 변화하면서, 최종적으로 최적 위상의 재료 밀도 분포를 생산한다. Eschenauer et al.에 의해 제안되었던 설계영역 안에 구멍을 도입하는 개념은 원래 경계면의 최적화 문제에 대해 설계변수의 유한적인 변화를 촉진시켜 최적화의 수렴성 개선을 도모하기 위함이었으나, 위상최적화의 관점에서는 초기 위상의 정의에 따라 다양한 최적 위상이 생산되는 것을 의미한다. 본 연구에서는 초기 설계영역 안에 국소적인 솔리드 상을 도입해 초기 위상에 변화를 주었을 때, 한정된 재료 하에 구조물에 배치 가능한 다양한 최적 위상을 산출할 수 있음을 검증하였다. 수치 예제로서 초기 설계영역 내에 다양한 치수를 가지는 국부적인 원형 솔리드의 고정된 개수를 투입하여 간단한 MBB-보의 위상최적 설계를 수행하였다.

• 제3의학
• /
• 제1권1호
• /
• pp.103-113
• /
• 1996

It is thought that the quantity and quality of the heat stimulation and the mechanism of heating process are important to understand the moxa-combustion. In order to get the basic data on the effective moxa-combustion method, combustion temperature changes (average temperature, peak temperature, average gradient temperature and maximum gradient temperature) of the heating period were measured respectively by the density of moxa material. For the experiment, samples of $300mg/0.26cm^3$ , $400mg/0.26cm^3$ and $500mg/0.26cm^3$ of moxa material were molded in a conical mold with each 10mm in diameter and height. 1. The average temperature and peak temperature of heating period on the moxa-combustion showed higher in the $400mg/0.26cm^3$ and $300mg/0.26cm^3$ than in the $500mg/0.26cm^3$ sample respectively. 2. The average gradient temperature of heating period on the moxa-combustion rose quickly in the $300mg/0.26cm^3$, $400mg/0.26cm^3$ and $500mg/0.26cm^3$ in that order and the maximum gradient temperature rose more quickly in the $300mg/0.26cm^3$ and $400mg/0.26cm^3$ than in the $500mg/0.26cm^3$ sample respectively. According to the above results, it is concluded that the density of moxa material is (the) more important (factor) than the weight or volume of moxa material on the combustion temperature changes of the heating period for the evaluation of the quality and quantity of moxa-combustion.

• 보존과학회지
• /
• 제27권1호
• /
• pp.49-59
• /
• 2011

손상된 도자기는 고대부터 여러 가지 방법과 재료를 사용하여 수리복원 되었다. 도자기 수리복원의 역사는 전통적인 수리방법을 이용해 실생활에서 활용 가능한 재료들을 사용하던 방식에서 새로운 재료의 도입과 다양한 처리기법의 시도 및 사용된 재료의 분석에 이르는 전문적인 분야로까지 그 영역을 넓히며 발전을 거듭하여 왔다. 우리나라의 도자기 수리복원 방법의 변천과정은 출토유물과 문헌자료, 분석 등을 통해 조사한 결과, 동물이나 식물에서 추출된 접착제, 석회와 같은 복원제 등을 사용하여 수리 복원하던 천연재료 사용 시기(고대~일제 강점기 이전)와, 주사비 등 천연재료와 합성수지가 혼합되어 사용되는 시기(일제 강점기~1970년대), 새로운 처리기법과 재료가 도입되고 보존규범에 입각하여 수리복원이 이루어진 합성수지 사용 시기(80년대 이후)로 구분 할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제1권1호
• /
• pp.26-32
• /
• 1975

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under hydroxides (calcium hydroxide, magnesium hydroxide, aluminium hydroxide and zinc hydroxide) were studied histologically. The class V cavities were prepared on the teeth and the pulp was amputated. Each hydroxide was placed over the amputated tissue and the cavity was sealed with zinc oxide eugenol cement. Animals were sacrificed after 3 days, 1, 2, and 3 weeks following the operation. The teeth were decalcified, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Calcium hydroxide: Inflammatory change was seen in the superficial portion of the remaining pulp tissue at the 3rd day and 1st week. The incompleted calicified material began to be deposited from the canal wall at the 2nd week, and the advanced calcified material was seen at the 3rd week. 2. Magnesium hydroxide: Severe inflammatory change was seen in the superficial portion of the remaining pulp from the 3rd day and the 1st week samples. Inflammatory change was decreased at the 2nd week and the slight calcified material was deposited from the root canal at the 3rd week. 3. Aluminium hydroxide: Severe inflammatory changes were seen in the remaining pulp tissue, the blood vessel was dilated, and the odontoblasts were destroyed at the 3rd day and 1st week. The fibrous degeneration spread to the apex at the 2nd week. There was no evidence of newly formed odontoblasts or deposition of calcified material underneath aluminium hydroxide. 4. Zinc hydroxide: The micrscopic picture was destructive. A thick necrotic layer was found under the amputated surface at the 3rd day and 1st week. Granulation tissue formation as well as chronic inflammatory changes extended to the apical area in the pulp tissue. Also there were no sign of odontoblastic formation or calcified material at the 2nd and 3rd week.

• 한국음향학회지
• /
• 제23권7호
• /
• pp.503-513
• /
• 2004

본 논문에서는 단위 음향파워에 대한 온도 변화인 열 감도 (thermal sensitivity)를 새로이 정의하였으며, 이 물리량으로 조직모사물질의 성능을 평가 할 수 있다는 것을 제안하였다. 실험에 사용된 시료는 공장에서 생산되는 식용 두부이고, 초음파의 주파수를 8 MHz로 고정하고 조사 (irradiation) 시간, 음향파워, 시료 표면으로 부터의 깊이 및 초음파 변환기와의 거리에 따른 온도 변화를 측정하였다. 아울러 깊이와 초음파 변환기와의 거리를 고정하고 일정한 음향파워 조건에서 주파수에 따른 온도 변화도 측정하였다. 측정된 온도변화를 열 감도로 변환하여 고찰한 결과 조직모사물질의 성능인자로 사용하기에 충분한 것으로 판명되었다. 특히 조직모사물질로 선택한 두부는 10 MHz 에서 열 감도가 최대로 나타났으며. 이 결과는 실제 인체 조직에서 열 감도가 주파수에 민감하게 의존 할 수 있다는 가능성을 함축하는 중요한 결과이다.

• 생태와환경
• /
• 제55권3호
• /
• pp.244-250
• /
• 2022

대청호의 수질개선을 목적으로 설치된 소옥천 인공습지에서 2년간 COD, TOC, T-P, T-N 농도의 변화를 조사하였고, 습지내 퇴적물의 오염도를 평가하기 위하여 퇴적물의 침강속도(4회) 및 물질함량(6회)을 측정하였다. 유입수를 통해 유입된 COD와 TOC는 습지를 통과하면서 약간 증가하였고, T-N과 T-P는 감소하는 경향을 나타냈다. 습지에 식재된 수생식물은 수중에 뿌리, 줄기, 잎을 뻗고 있는 부엽 및 부유식물에서 유기물, 인, 질소의 함량이 높게 나타났다. 인공습지로 유입되는 부유물질의 대부분은 1차 침강지에서 빠른 속도로 침강되어 많은 양이 제거되는 결과를 나타내고 있었다. 총인과 총질소의 퇴적물 오염도는 심한 오염도 상태를 나타내고 있었으며, 이렇게 총인과 총질소를 다량 함유하고 있는 퇴적물은 물리·화학적 환경변화에 의해 용출되어 습지내에서 내부오염원으로 작용할 가능성이 높다고 할 수 있다.