• Journal of Technology Innovation
• /
• v.14 no.3
• /
• pp.209-235
• /
• 2006

Since the end of the cold war, technical tie-up between private corporations and an army in developed countries has increased a lot, and the trend is spreading through developing countries rapidly. To cope with the circumstance actively, the dual use technology program for both private corporations and an army was begun in Korea in 1998. With the program, overlapping investment was resolved and technology transfer was stimulated. And the standardization and information exchange saved considerable national budget and made possible economic profit. Yet, the combination project of 4 ministries and offices showed problems such as loose cooperation and, low industralization record. However, developed countries are out of the mere stage of dual technology development and turn into broad technical tie-up including future prediction, national competitiveness improvement, and the private company's leading participation and they are systemizing them very fast. Korea also set up the national defense reform plan with the blueprint of future military force improvement, budget increase for national defense research, and increased participation of private corporations, and created Defense Acquisition program Administration to support them. The innovation of national defense system brings forward the need to link the private and military innovation. Korea has pursued the fast growth through assimilation, absorption, and improvement of foreign technology. But now, Korea has to focus on self innovation, original technology, parts and material. As this applies to private companies and military equally, it is important to concentrate limited resources for the effective technology cooperation. Considering this, the strategies to activate the dual use technology are program concept and range extension, task-deduction way improvement and future-oriented common task deduction, and promotion system improvement.

• Membrane Journal
• /
• v.30 no.2
• /
• pp.124-130
• /
• 2020

Climate change is getting worse in the 21st century. So, water shortages are expanding worldwide. Carbon dioxide generated from the use of fossil fuels is 80% of the total green house gas. Because it occupies, it has become a factor of global warming. Therefore, the importance of water treatment membrane, gas separation membrane, and secondary battery separation membrane is increasing, but it occupies technology in developed countries such as the United States, Japan, and Germany. Therefore, the advancement of membrane technology is urgently required. So, although the country supports a lot of research budgets, We will analyze the results using NTIS data. As a result of the analysis used, it is supported mainly for short-term tasks, and the research budget is small compared to other technical fields, so the basic material field technology is weak. Therefore, when we invest a lot of long-term tasks, with a lot of budget, and universities, membrane technology has been improved and competitiveness has been strengthened.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.16 no.27
• /
• pp.35-42
• /
• 1993

Just in time backup of the essential materials at industry and military is very important. Especially in case of military essential materials at wartime is so important as it controls victory and/or defeat. This paper presents the new approach for just in time suppling the essential materials at the beginning wartime - security step of materials, reservation priority and quantity requirement degree. In order to build the new approach, we introduced the concepts of cost and effect analysis for each essential item. First of all, the developed model will be useful to maximize combat sustaning power under constraint of budget.

• Journal of the Korean Society for Library and Information Science
• /
• v.20
• /
• pp.437-472
• /
• 1991

Looseleaf publications are truly a unique type of library material, partaking simultaneously of the nature of serials and monographs. Therefors, two disparate methods of cataloging looseleaf publications coexist today. But the decision to catalog looseleaf publications as serials as monographs affects the acquisition, budget allocation, receipt, record maintenance, and user access. In view of these aspects, this study analyzed the sources of information and seven areas of description (title and statement of responsibility ; edition ; publication, distribution, etc. ; physical description; series ; note ; standard number and terms of availability) of CRDLP2 as the exclusive cataloging rules of looseleaf publications. The results of the analysis were summarized in chapter 4 in detail. Finally, it is desirable that looseleaf publications for updationg are cataloged as monographs since the bibliographic description applied to looseleaf publications follows so colosely that of monographs. And, the cataloger must pay partioular attention to describe the physical description area because of numerous changes of the bibliographic records accompanied by frequent revisions or updates of the publications.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.133-136
• /
• 2005

In the case of contacts between semiconductor and metal in semiconductor devices, they tend to be unstable because of thermal budget. To prevent these problems we deposited W-C-N diffusion barrier for preventing the interdiffusion between metal and semiconductor. The thickness of the barrier is $1,000{\AA}$ and the pressure is 3 mTorr during the deposition. In this work we coated LSMO (CMR material) on W-C-N diffusion barrier and then we studied the interface effects between LSMO layer and W-C-N diffusion barrier. We got results that the magnetic characteristics of LSMO thin film are still maintained after annealing at $800^{\circ}C$ for 3 hr because W-C-N thin diffusion barrier was prevented the diffusion of oxygen between LSMO and Si substrate.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.132-133
• /
• 2015

Efficient scheduling and resource management are the key factor to reduce construction project budget (e.g., labor cost, equipment cost, material cost, etc.). Resource-based line of balance (LOB) technique has been used to complement the limitations of time-driven scheduling techniques (e.g., critical-path method). Optimizing construction alternatives contributes cost savings while honoring the project deadline. However, existing LOB scheduling is lack of identifying optimal resource combination. This study presents a method which identifies the optimal construction alternatives, hence achieving resource minimization in a repetitive construction by using genetic algorithm (GA). The method provides efficient planning tool that enhances the usability of the system.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.27-37
• /
• 2017

In the construction sites, rush (speedy construction) work have recently been overused because of budget reductions by reducing the construction duration after the long-term economic recession and construction business stagnation with institutional change including the instruction of the duration shortening bidding system and the introduction of the post-construction sales system by the Korea Research Institute for Human Settlements. Due to this, negligent accidents have frequently occurred by forcing manpower, equipment, finance, and material procurement and pressing ahead with impractical construction wok at night according to the reduction of construction schedules. Therefore, this paper has the necessity of this study to seek for alternatives to prevent negligent accidents by finding factors related to rush work in the reality that the importance for preventing negligent accidents is more emphasized while they have not been reduced in construction sites.

• Korean Institute of Interior Design Journal
• /
• no.9
• /
• pp.10-17
• /
• 1996

With the ever-increasing important of high-speed information in society as we move towards the 21 st century. Interior design and it's working condition has been changed a great deal included a sort of each special character and make a difference against the others. It used to be find a great poles asunder of worker's safety and project quality according to the environmental dimension of interior construction field as if they should be a pleasantness or poor condition. This research aimed to improvement of environmental construction field of interior with construction engineers and particular interior labors in 4 phases as : ⅠThe preparatory phase : -Secure a Budget, Environmental safety supervisor -Fix of Design quality, Construction period. -Choice of Construction method, Sub constructing Ⅱ. Starting work phase ; -Capacity , Safety of temporary power line. -Carriage, Stock of Material -Safety of Electronic tools, -Personal protector. Ⅲ. Working period ; -Ventilation, I illumination of working place. -Measurement of environmental working condition Ⅳ.Finish working phase ; -Analysis of measurement data. -Evaluation and making up for the weak point. -Keeping data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.66.6-66
• /
• 2001

In this paper, we studied the error compensation using an error budget method for repeatability improvement of the precision positioning system. The precision positioning system is developed for micro-pressing machine. We performed the force and displacement analysis about parts of the system. Proposed system determines the position and orientation of the materials manufactured by micro-pressing machine. It is consisted of x-y-z linear stages setting the position, and the gripper system setting the orientation. We executed kinematic and dynamic modeling of the whole precision positioning system. By generalizing the design variables, precision positioning system has the flexibility of material dimension. As we tried an error compensation using ...

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.810-819
• /
• 2007

Usually the status of a bridge is determined by its structural capability and material strength. Consequently a lot of researchers have studied the failure, the fatigue, and the deterioration of the structure in terms of the structural function of a bridge. However, the overall performance of a bridge may be affected simply by the damage of one of its components. Therefore this study utilized a systematic classification and statistical analysis based on the existing bridge inspection data collected in Taiwan to reach the following goals: (1) assess the performance distribution and deterioration rate for bearing and expansion joint of bridge; (2) find out the right time to do the preventive and essential maintenance for the component of bridge with an empirical method, and to decide what time and which component of a bridge will receive preventive maintenance or regular maintenance.