• 한국분말재료학회지
• /
• 제29권6호
• /
• pp.459-467
• /
• 2022

Soft magnetic powder materials are used throughout industries such as motors and power converters. When manufacturing Fe-based soft magnetic composites, the size and shape of the soft magnetic powder and the microstructure in the powder are closely related to the magnetic properties. In this study, Fe-Si-Al-P alloy powders were manufactured using various manufacturing process parameter sets, and the process parameters of the vacuum induction melt gas atomization process were set as melt temperature, atomization gas pressure, and gas flow rate. Process variable data that records are converted into 6 types of data for each powder recovery section. Process variable data that recorded minute changes were converted into 6 types of data and used as input variables. As output variables, a total of 6 types were designated by measuring the particle size, flowability, apparent density, and sphericity of the manufactured powders according to the process variable conditions. The sensitivity of the input and output variables was analyzed through the Pearson correlation coefficient, and a total of 6 powder characteristics were analyzed by artificial neural network model. The prediction results were compared with the results through linear regression analysis and response surface methodology, respectively.

• 아태비즈니스연구
• /
• 제13권4호
• /
• pp.151-161
• /
• 2022

Purpose - The purpose of this study is to redefine imperial cultural properties and pass on and provide the elegant value of imperial cultural properties with the Allen Collection's promotion to retrieve imperial cultural properties. Design/methodology/approach - This study was approached to deal with the essential interpretation of cultural improvement through discussion in the cultural science approach Findings - As a result of examining ways to revitalize tourism resources using Allen Collection, it is necessary to cultivate international manners and knowledge levels in strengthening imperial awareness through the establishment of imperial museums, enacting laws on standards for designation of imperial cultural assets, and promoting them. In addition, policy needs such as the development plan of the imperial cultural festival, re-establishment, application, reuse, re-establishment, and reproduction according to environmental changes, and technical support and monitoring systems for investigating and preserving imperial cultural assets are needed. Research implications or Originality - The study on the device imperial cultural assets as tour resources the cultural assets mate be not only preserved and inherited to the descendant but also useful in contemporary national emotion positively. for we could obtain wide national support and co-operation in the protection work of cultural assets. What makes our cultural assets leaved indifferent before destruction like this most of all, it is form indifference of the people, we must make an effort to meet with recognizing the value of useful cultural assets by mean of utilizing cultural assets as tour resources to inhibit more damage of destruction of cultural assets.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권7호
• /
• pp.1759-1772
• /
• 2023

Chinese named entity recognition (NER) is a challenging work that seeks to find, recognize and classify various types of information elements in unstructured text. Due to the Chinese text has no natural boundary like the spaces in the English text, Chinese named entity identification is much more difficult. At present, most deep learning based NER models are developed using a bidirectional long short-term memory network (BiLSTM), yet the performance still has some space to improve. To further improve their performance in Chinese NER tasks, we propose a new NER model, IDCNN-BiLSTM-Highway, which is a combination of the BiLSTM, the iterated dilated convolutional neural network (IDCNN) and the highway network. In our model, IDCNN is used to achieve multiscale context aggregation from a long sequence of words. Highway network is used to effectively connect different layers of networks, allowing information to pass through network layers smoothly without attenuation. Finally, the global optimum tag result is obtained by introducing conditional random field (CRF). The experimental results show that compared with other popular deep learning-based NER models, our model shows superior performance on two Chinese NER data sets: Resume and Yidu-S4k, The F1-scores are 94.98 and 77.59, respectively.

• Clinical Endoscopy
• /
• 제56권2호
• /
• pp.194-202
• /
• 2023

Background/Aims: Endoscopic therapy for neoplastic Barrett's esophagus (BE) has become the standard of care over the past two decades. In clinical practice, we regularly encounter patients who fail to achieve complete squamous epithelialization of the esophagus. Although the therapeutic strategies in the individual stages of BE, dysplasia, and esophageal adenocarcinoma are well studied and largely standardized, the problem of inadequate healing after endoscopic therapy is only marginally considered. This study aimed to shed light on the variables influencing inadequate wound healing after endoscopic therapy and the effect of bile acid sequestrants (BAS) on healing. Methods: Retrospective analysis of endoscopically treated neoplastic BE in a single referral center. Results: In 12.1% out of 627 patients, insufficient healing was present 8 to 12 weeks after previous endoscopic therapy. The average follow-up duration was 38.8±18.4 months. Complete healing was achieved in 13 patients already after intensifying proton pump inhibitor therapy. Out of 48 patients under BAS, 29 patients (60.4%) showed complete healing. An additional eight patients (16.7%) improved, but only partial healing was achieved. Eleven (22.9%) patients showed no response to BAS augmented therapy. Conclusions: In cases of insufficient healing even under exhaustion of proton pump inhibitors, treatment with BAS can be an option as an ultimate healing attempt.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.183-194
• /
• 2024

D3 tools steel and 440C stainless steel (SS) are normally being employed for application such as knife blade and cutting tools. These steels are iron alloys which have high carbon and high chromium content. In this study, lab work focused on the microstructural and corrosion behavior of D3 tools steel and 440C SS after went through heat treatment processes. Heat treatments for both steels were started with normalizing at 1020 ℃, continue with hardening at 1000 ℃followed by oil quenching. Cryogenic treatment was carried out in liquid nitrogen for 24 hours. The addition of cryogenic heat treatment is believed to increase the hardness and corrosion resistance for steels. Both samples were then tempered at two different tempering temperatures, 160 ℃ and 426 ℃. For corrosion test, the samples were immersed in NaCl solution for 30 days to study the corrosion behavior of D3 tool steel and 440C SS after heat treatment. The mechanical properties of these steels have been investigated using Rockwell hardness machine before heat treatment, after heat treatment (before corrosion) and after corrosion test. Microstructure observation of samples was carried out by scanning electron microscopy. The corrosion rate of these steels was calculated after the corrosion test completed. From the results, the highest hardness is observed for D3 tool steel which tempered at 160 ℃(54.1 HRC). In terms of microstructural analysis, primary carbide and pearlite in the as-received samples transform to tempered martensite and cementite after heat treatment process. From this research, for corrosion test, heat treated 440C SS sample tempered with 426 ℃possessed the excellent corrosion resistance with corrosion rate 0.2808 mm/year.

• Journal of Radiation Protection and Research
• /
• 제21권4호
• /
• pp.273-284
• /
• 1996

착상전기(着床前期}의 태아(胎兒)는 방사선(放射線)을 비롯한 많은 환경요인(環境要因)에 대하여 감수성(感受性)이 높은 개체(個體)임에도 불구하고 특히 이 시기는 임신부(姙娠婦)가 자각(自覺)적으로 임신을 감지할 수 없는 시기이기에 이러한 여러 환경유해요인으로부터 의도적으로 피할 수가 없다. 그러므로 착상전기의 영향을 충분히 검토한 후에 의료행위를 취할 것이며 이에 대한 방어(防禦)대책도 검토할 필요가 있다. 종래 까지 방사선에 대한 태아영향에 관한 많은 연구결과에 의하면 방사선 및 그 외의 유해요인에 대한 착상전기의 영향은 배사망(胚死亡)(유산(流産))만이 일어나며 기형(奇形)은 유발(誘發)하지 않는다고 하여 발생학(發生學)등 여러 교과서에서 기형은 기관형성기(器官形戚期)만이 국한(局限)해서 일어나는 영향이라고 단정되어 왔었다. 그러나 이 연구결과 착상전기에 있어서도 기형이 유발하여 오히려 기관형성기((器官形成期)보다도 감수성이 높다는 것이다. 또한 착상전기에서도 기형유발의 시기특이성을 가지며 여러 종류의 기형이 발생한다는 것이 본 연구로부터 밝혀졌다. 실험동물은 ICR Mouse를 사용했다. ICR Mouse는 일반적으로 태아사망 및 기형실험에 널리 사용되는 것이다. 사육조건은 Conventional 한 조건하에서 사육했으며 Mating 방법(方法)은 Female 마우스의 발정기(Sexual Excitement period)에 있는 mouse 질(膣)을 육안 적으로 관찰하여 $AM 6:00{\sim}AM 9:00$시까지 3시간만 mate시켰다. AM9:00시에 Vaginal Plug를 관찰하여 임신을 확인했다. Plug가 확인 된 마우스는 AM8:00시에 수정(Conception)된 것으로 가정하고 이 시점을 임신 0일 0시로 수정 난의 태아연령을 산정했다. 방사선조사는 $^{135}Cs\;{\gamma}-$선을 사용하였으며 임신 마우스의 전신조사를 실시하고 조사한 시기는 각 2, 48, 72, 96hpc이며 조사한 방사선 선량 군은 $0.1{\sim}2.5Gy$이다. 태아영향 관찰지표는 태아 연령은 mate일 오전 8:00시를 임신 0일 0시로 환산하여 태아연령 18일에 임신마우스를 Cervical vertebral dislocation에 의해 도살했다. 도살 후 해부하여 각 임신 마우스별로 관찰했다. 착상 율을 관찰하기 위하여 황체수를 세었고, 태아사망과 생존태아를 구별했다. 자궁 내 사망의 분류는 태아사망을 1) preimplantation death 2) Embryonic death 3) Fetal death로 분류했다. 착상전사망은 수정후 $0{\sim}4.5$일(1세포기${\sim}$배반포후기 부화까지)까지의 사망으로써 난소의 황체수(배란 수)와 착상태아(생존태아, 착상흔, 태반유잔, 흡수태아, 침연태아의 합계)로부터 구할 수 있다. Embonic death는 수정 후 $4.5{\sim}13$일까지의 사망으로써 Implantation sites, Placental remnants, Resorption of fetus로 관찰된 것이다. Fetal death는 수정후 $14{\sim}18$일까지의 사망으로써 Maceration of fetus로 관찰되는 것이다. 통계학적 분석은 각 Group의 착상 을과 자궁 내 사망 율을 산출할 때에는 각 임신마우스에 따라 발생빈도가 크게 다르기 때문에 통계처리에는 Non parametric 검정인 Kluskal Wallis 검정을 사용하여 분석하였다. 또한 개체 Level 영향인 착상을, 태아사망, 기형의 threshold dose의 산정에 대해서는 SAS-Logistic 검정에 따라 통계 분석을 하여 $5%(Ld_5,\;ED_5)$ 및 $10%{\times}2/3$점을 threshold dose로 판단했다. 태아체 중에 대해서는 parametric검정인 t-test검정에 의하여 분석했다. 그 결과 착상전기에서도 기형이 유발하며 특히 시기에 따라 일어나는 때와 일어나지 않는 때가 있음을 본 연구로부터 밝혀졌다. 또한 착상전기의 영향으로써 유발되는 기형은 여러 종류의 기형이 발생함이 밝혀졌다. 특히 이시기는 착상전 사망 및 배(胚)사망은 방사선 선량에 따라 크게 일어나나 태아사망(Fetal death) 및 태아체중은 유의차(有意差)가 없었다.

• 치위생과학회지
• /
• 제9권3호
• /
• pp.339-344
• /
• 2009

본 연구의 목적은 일부 성인들의 구강위생용품에 대하여 지식수준과 사용태도를 조사하여 구강위생용품에 대한 지식 및 사용을 향상시키고 이를 위한 교육프로그램 개발의 기초 자료로 사용하기 위하여 2007년 12월 3일부터 17일까지 383부 중 부적절한 설문지 31부를 제외한 352부를 대상으로 SPSS version 17.0 for window를 이용하여 분석한 결과는 다음과 같다. 1. 구강위생용품 지식수준은 "칫솔머리는 위로 향해 보관해야 한다." 76.77점으로 가장 높았으며, "칫솔질 할 때 혀도 닦아야 한다." 74.86점, "일반 칫솔의 올바른 사용방법을 알고 있다." 71.84점 순으로 나타났다. 반면 물 사출기, 혀 클리너, 치간 칫솔 등에 대한 지식 수준이 낮은 것으로 나타났다. 2. 구강위생용품 실천수준은 "칫솔머리를 위로 향하게 보관한다." 76.77점으로 가장 높았으며, "일반 칫솔을 사용하고 있다." 74.07점, "칫솔질 할 때 혀도 닦는다." 69.92점 순서로 나타났다. 반면 물 사출기, 혀 클리너, 전동칫솔에 대한 사용정도가 낮은 것으로 나타났다. 3. 일반적인 특성에 따른 지식수준은 성별에서는 남자 62.54점, 연령은 50세 이상 66.28점, 가족 수 4명 61.52점, 학력은 대학원졸 66.78점, 직업은 자영업과 전문직 63.63점, 경제 수준은 100-150만원 66.66점, 아버지의 흡연여부에서는 '예' 61.55점으로 가장 높게 나타났으나 통계적으로는 유의하지 않았다. 4. 일반적인 특성에 따른 사용태도는 성별에서는 여자 47.70점, 연령은 40-49세 47.78점, 가족 수 4명 48.18점, 학력은 대학원졸 50.17점, 직업은 전문직 49.79점, 경제수준은 100-150 만원 51.89점, 아버지의 흡연여부에서는 '예' 48.10점으로 가장 높게 나타났으나 통계적으로는 유의하지 않았다.

• 한국환경보건학회지
• /
• 제46권4호
• /
• pp.433-443
• /
• 2020

Objective: This study aimed to introduce the use of humidifier disinfectant (HD) in hospitals based on an on-site investigation. Methods: A preliminary survey and on-site investigation of HD use were conducted in 23 hospitals. Among them, one hospital without previous information on HD use was selected for a pilot investigation; 22 hospitals were selected based on previous documents and exposure statements from parliamentary investigation and exposure assessment regarding HD. Descriptive statistics were used to present distribution and characteristics of HD purchase and HD use in hospitals. Also, details on interviews from the on-site investigation were described. Results: Among the 23 hospitals, a total of ten were confirmed to have purchased and used an HD (nine hospitals) or HD-like product (one hospital). For the purchased HD products, four hospitals reported 'Aekyung Gaseupgi Mate', two hospitals reported 'Oxy Ssakssak New Gaseupgi Dangbun', and one hospital reported 'Homeplus Gaseupgi Chungjungje' (one hospital used three kinds of HD products). One hospital reported an HD-like product and four hospitals were 'Unknown'. For the number of HD products purchased, five hospitals reported '100 or less', two hospitals reported 'More than 100', and three hospitals were 'Unknown'. For each of the ten hospitals, we described detailed characteristics of HD purchase and its exposure status obtained through on-site investigation, including the purchase volume (i.e., number of products), exposure space (i.e., patient's room, staff space), and exposure period. Additionally, a comparison of on-site investigation and parliamentary investigation or exposure assessment regarding HD was reported. Conclusion: This study introduced detailed cases of HD purchase and HD use in hospitals based on an on-site investigation, and our findings revealed a possibility of a considerable volume of HD exposure in various multiuse facilities, including hospitals.

• Genomics & Informatics
• /
• 제10권1호
• /
• pp.1-8
• /
• 2012

Recently, the technologies of DNA sequence variation and gene expression profiling have been used widely as approaches in the expertise of genome biology and genetics. The application to genome study has been particularly developed with the introduction of the nextgeneration DNA sequencer (NGS) Roche/454 and Illumina/ Solexa systems, along with bioinformation analysis technologies of whole-genome $de$ $novo$ assembly, expression profiling, DNA variation discovery, and genotyping. Both massive whole-genome shotgun paired-end sequencing and mate paired-end sequencing data are important steps for constructing $de$ $novo$ assembly of novel genome sequencing data. It is necessary to have DNA sequence information from a multiplatform NGS with at least $2{\times}$ and $30{\times}$ depth sequence of genome coverage using Roche/454 and Illumina/Solexa, respectively, for effective an way of de novo assembly. Massive shortlength reading data from the Illumina/Solexa system is enough to discover DNA variation, resulting in reducing the cost of DNA sequencing. Whole-genome expression profile data are useful to approach genome system biology with quantification of expressed RNAs from a wholegenome transcriptome, depending on the tissue samples. The hybrid mRNA sequences from Rohce/454 and Illumina/Solexa are more powerful to find novel genes through $de$ $novo$ assembly in any whole-genome sequenced species. The $20{\times}$ and $50{\times}$ coverage of the estimated transcriptome sequences using Roche/454 and Illumina/Solexa, respectively, is effective to create novel expressed reference sequences. However, only an average $30{\times}$ coverage of a transcriptome with short read sequences of Illumina/Solexa is enough to check expression quantification, compared to the reference expressed sequence tag sequence.

• 대한치과보철학회지
• /
• 제39권2호
• /
• pp.146-156
• /
• 2001

The purpose of this study was twofold. One was to evaluate the wettability of 4 elastomeric impression materials on tooth and different kinds of filling materials. The other was to identify the effect of topical surfactants sprayed on the surface of each impression. The elastomeric impression mate rials used in this experimental study were one polyether(Impregum F) and three polyvinyl siloxanes(Provil novo, Zerosil, Imprint). The abutments were prepared for 3/4 crown or onlay on the extracted human first molar. The filling materials used in this study for the duplication of prepared abutment were composite resin, amalgam, and casting metal. Impression was taken by manufacturer's recommendations and the number of voids on the impression surface was counted. The topical surfactants were Spannex $II^{(R)}$ and $Cohere^{(R)}$. The wettability was evaluated by comparing the number of voids between non-treated group and treated groups. The results were as follows : 1. $Zerosil^{(R)}$ showed the least number of voids on the impression surface. The number of voids increased in order of Provil $novo^{(R)}$, Impregum $F^{(R)}$, and $Imprint^{(R)}$. 2. Impregum $F^{(R)}$ and $Zerosil^{(R)}$ showed the least number of voids on the surface of dental stone master cast. The number is inclosed in order of Provil $novo^{(R)}$ and Imprint 3. When abutment material is tooth, the number of voids on the surface of master cast was smallest compared with that of other abutment materials. The number of voids increased in order of casting metal, amalgam and composite resin 4. The number of voids on the surface of the dental stone master cast was smallest when Spannex $II^{(R)}$ was used, followed by $Cohere^{(R)}$ treated group and non-treated group. These results suggest that the difference in wettability caused by the types of rubber base impression materials as well as abutment materials can affect the number of voids. And the use of topical surfactant for rubber base impression materials can improve the wettability of the materials and enhance the accurate master cast which has fewer surface voids.