• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.175-183
• /
• 2015

본 논문은 취업하고자하는 학생의 빅데이터를 분석하여 최적의 취업 성공률을 높이기 위한 취업 전략 구축 방법을 제안한다. 특히 취업 방향을 잘 결정하지 못하여 취업률이 낮은 2년제 여자전문대학생을 대상으로 실험을 했으며, 기존 취업 전략의 중대한 문제점은 구직업체의 요구에 의해 학생들의 학교 성적 정보, 외모, 성격 등 단순한 정보만으로 구직에 참여하게 된다. 이로 인해 취업하려는 학생들의 만족도가 떨어지고, 취업 후 부적응 사례로 중도 직장을 포기하는 사태가 발생한다. 이런 문제를 해결하기 위해서 빅데이터 분석을 이용하여 취업 전략을 구축하고자 하는 것이다. 이를 증명하기 위해 전년 대비, 2014년 취업 통계 데이터로 증명했으며, 취업의뢰건도 전년 대비 21.3%가 상승했고, 기업과 학생간 취업 매칭률도 전년대비 81.4%증가 했다. 가장 중요한 최종 취업성공률도 전년 대비 63.1%가 증가한 것으로 나타났다.

• 한국안전학회지
• /
• 제22권4호
• /
• pp.96-101
• /
• 2007

Usually pictograms embedded in safety signs are such final means to transmit hazard information that the importance of them cannot be emphasized too much. Nevertheless, in Korea, few people are interested in safety signs and their functions so that evaluation of safety signs are seldom committed nor safety signs draw workers' attention to fulfill their functions. Therefore this research aimed to standardize the procedure for developing safety signs in order not only to give practical help to industrial workers but to match them international standards, and to develop a few examples through the suggested standard procedure. As results, a procedure for developing industrial safety signs was developed by combining both ANSI Z535.3 and ISO 9186 with a special emphasis on action inducibility as the former emphasized as well as comprehensibility as the latter suggested. According to test results with undergraduate students as well as industrial workers on a few signs developed through the suggested procedure, action inducibility was higher whereas confusion rate was lower than expected on one hand, and it could be concluded that the procedure would supply results that can be satisfied on the other hand.

• 한국통신학회논문지
• /
• 제38C권12호
• /
• pp.1207-1215
• /
• 2013

이 논문에서는 장애물이 존재하는 환경에서 적외선 센서를 가진 다수의 감시 로봇이 획득한 정보를 융합하여 분산되어있는 표적의 위치 좌표를 추정하는 기법을 제안한다. 방위각(azimuth)과 표적을 대응시키는 방법으로는 장애물이 존재하지 않는 경우에서 제안되었던 깊이-우선(depth-first) 트리 탐색(tree search) 기법을 바탕으로, 우회경로 탐색, 중간 단계 탐색 종료, 하위 단계 부분 탐색, 결정기준 보완 등을 추가함으로써 트리 탐색을 확장한 새로운 기법을 제시하였다. 방위각과 표적이 대응된 후에는 하나의 표적을 가리키는 방위각들에 최소 제곱 오차(least square error) 알고리듬을 적용하여 최적 교점을 구함으로써 표적의 위치 좌표를 추정한다. 제안한 위치 추정 기법의 좌표 추정 성능과 복잡도를 모의실험으로 제시하고 분석한다.

• 산업경영시스템학회지
• /
• 제28권2호
• /
• pp.75-80
• /
• 2005

As a result of globalization process and TBT agreement, KS is also being revised, reestablished and some are abolished according to international standards such as ISO, IEC, etc. Conventional KS sampling inspection standards contained many different procedures from ISO, but recently, to match with international standards, all the rest of the standards except KS A 3102, 3104, 3151 were abolished, and the even the ones being in use still are also scheduled and be revised. Especially, KS A 3101, KS A 3105, KS A 3109, which were used most frequently in Korea were abolished, and the KS A ISO $2859-0\~3$ which coincide with ISO standards were established 3 years ago, but the implementation rate is very slow. Starting next year the national examination for qualification process for the product quality related item will the started and the preparation is underway. This study will investigate the recent sampling inspection process of KS as well as SPC related KS overhaul problem and present the data to help workers in SPC related field. One of the main example will be on KS A ISO 2859-3 and will attempt to help those medium and small sized companies with examples.

• 한국화재소방학회논문지
• /
• 제27권6호
• /
• pp.15-20
• /
• 2013

반발 입자 군집 최적화 알고리즘을 이용하여 시편 표면에서의 대류열전달 계수, 방사율 및 화염에 의한 열유속을 예측하였다. 콘 칼로리미터를 이용하여 여러 열유속 조건 하에서의 방무목 시편의 표면 온도와 질량감소율 및 발화시간을 측정하였다. 본 연구에서 최적화된 대류열전달계수, 방사율 및 화염에 의한 열유속을 이용하여 계산된 표면온도는 실험결과와 각 열유속에 대하여 평균오차가 2% 내로 잘 일치하였다. 본 연구에서 제시한 방법을 이용하여 실험적 방법으로 직접 측정하기 매우 어려운 화염이 발생하는 표면에서 열전달과 관련된 여러 물리량을 구할 수 있다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.145-150
• /
• 2002

It has been well known that ductile fracture of steels is accelerated by triaxial stresses. The characteristics of ductile crack initiation in steels are evaluated quantitatively using two-parameters criterion based on equivalent plastic strain and stress triaxiality. It has been demonstrated by authors using round-bar specimens with circumferential notch in single tension that the critical strain to initiate ductile crack from specimen center depends considerably on stress triaxiality, but surface cracking of notch root is in accordance with constant strain condition. In order to evaluate the stress/strain state in the specimens, especially under dynamic loading, a thermal, elastic-plastic, dynamic finite element (FE) analysis considering the temperature rise due to plastic deformation has been carried out. This study provides the fundamental clarification of the effect of strength mismatching, which can elevate plastic constraint due to heterogeneous plastic straining, loading mode and loading rate on critical condition to initiate ductile crack from notch root using equivalent plastic strain and stress triaxiality based on the two-parameter criterion obtained on homogeneous specimens under static tension. The critical condition to initiate ductile crack from notch root for strength mismatched bend specimens under both static and dynamic loading would be almost the same as that for homogeneous tensile specimens with circumferential sharp notch under static loading.

• 컴퓨터교육학회논문지
• /
• 제3권2호
• /
• pp.115-127
• /
• 2000

기존 워드프로세서의 맞춤법 검사기는 여러 오류 단어 후보군 중에서 1개를 선택하는 오류 작업의 불편함과 60%대의 낮은 교정률 그리고 늦은 처리 속도 등의 단정을 갖고 있다. 본 연구에서는 이러한 단점들을 해결하기 위하여 1개의 교정 단어와 페이지 단위의 일괄 교정으로 교정의 불편함을 해소하고, 높은 오류 교정률과 빠른 처리 속도를 가능하게 하는 방안을 제시한다. 이를 위하여 형태소 분석 시 처리 속도를 향상시키기 위한 방법으로 양방향 최장일치법을 적용하며, 교정 시의 정확성보장과 처리 속도의 향상을 위한 사전과 여러 알고리즘(복합명사 분리, 보조용언 분리, 오타 교정 등) 등을 개발하여 적용하였다. 특히 한국어에서 모호성이 많이 발생되는 의존명사 및 접미사와 조사/어미의 구분 방안, "로써/로서, 되다" 등의 구분 처리 방안을 제시하여 교정 시스템의 신뢰성을 높였다.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.285-293
• /
• 1998

This paper presents unequal error protection and error concealment techniques far robust H.263 video transmission over mobile channels. The proposed error protection scheme has three major features. First, it has the capability of preventing the loss of synchronization information in H.263 video stream as much as possible that the H.263 decoder can resynchronize at the next decoding point, if errors are occurred. Secondly, it employs an unequal error protection scheme to support variable coding rates using rate compatible punctured convolutional (RCPC) codes, dividing the encoded stream into two classes. Finally, a macroblock-interleaving scheme is employed in order to minimize the corruption of consecutive macroblocks due to burst errors, which can make a proper condition for error concealment. In addition, to minimize the spatial error propagations due to the variable length codes, a fast resynchronization scheme at the group of block layer is developed for recovering subsequent error-free macroblocks following the damaged macroblock. futhermore, error concealment techniques based on both side match criterion and overlapped block motion compensation (OBMC) are employed at the source decoder so that it can not only recover the lost macroblock more accurately, but also reduce blocking artifacts. Experimental results show that the proposed scheme can be an effective error protection scheme since proper video quality can be maintained under various channel bit error rates.

• 한국유체기계학회 논문집
• /
• 제4권4호
• /
• pp.22-27
• /
• 2001

The pump/motor selection program for optimized selection of regional water supply facilities was developed based on a flowchart compiled from basic operational data, total head requirement, initial pump/motor specification selection etc. This program was developed in Visual Basic. The program accepts, as in the flowchart, operational requirements of pumps and other system requirements, and calculates specific speed based on flow rate, total head and rotational speed. Then the calculated specific speed is used to select pump types and speed prior to determining likelihood of cavitation occurring at the calculated NPSH. Power requirement is then calculated for safe operation of pump to assist final pump selection. Test results of the program match very closely to the design values of Paldang intake pump station(3rd stage) proving that the program can be used as an effective and practical aid for designing new regional water supply systems.

• 한국과학교육학회지
• /
• 제7권1호
• /
• pp.53-68
• /
• 1987

To figure out the present status of Korean middle school science curriculum in the national level is not an easy job. especially in the restricted condition such as this research project. Therefore, to achieve a meaningful result, the case study type of research was adopted In the study five middle schools (2boy's and 3girl's)were selected and examined intensively. In this study, two major works were done. One was the analysis of the present middle school science curriculum and the other was to examine the current status of the administration of the curriculum in schools. This first study focused on the evaluation of the current Curriculum. Acording to the result, the objectives stated in the teachers guide and implied by the testbook were heavily concentrated on the knowledge level in Boom's taxonomy. Achievement on the objectives which were selected as important were very low. The average pass rate for the selected objectives was less than 50% of the students. This means the content level of the present science curriculum is not appropriate. The study suggested that the present middle school science curriculum should be revised and the content should be replaced with easier topics to match the students cognitive level. The study also suggested further studies to measure the cognitive level of Korean students in national scale.