• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.1862-1867
• /
• 1999

무선 ATM 시스템에서 효율적인 데이터 전송을 위해서는 우수한 오류 정정 부호가 필요하다. 본 논문에서는 오류 정정 부호로 RCPSCCC를 사용한 적응 하이브리드 ARQ 기법을 제안한다. 이 RCPSCCC의 부호율은 채널 환경과 데이터 종류에 따라 조절된다. 레일레이와 라이시안 페이딩 채널에서 BER(Bit Error Ratio)과 WER(Word Error Ratio)의 상한계(upper bound)를 outer 부호기의 inner 부호기의 유효 자유거리(effective free distances)만을 사용하여 유도한다. RCPSCCC를 적응 하이브리드 ARQ 프로토콜에 적용함으로서 효율적인 데이터 전송을 할 수 있다.

• Journal of Communications and Networks
• /
• 제11권5호
• /
• pp.480-488
• /
• 2009

Cooperative transmission is an effective solution to improve the performance of wireless communications over fading channels without the need for physical co-located antenna arrays. In this paper, selection combining is used at the destination instead of maximal ratio combing to optimize the structure of destination and to reduce power consumption in selective decode-and-forward relaying networks. For an arbitrary number of relays, an exact and closed-form expression of the bit error rate (BER) is derived for M-PAM, M-QAM, and M-PSK, respectively, in both independent identically distributed and independent but not identically distributed Rayleigh fading channels. A variety of simulations are performed and show that they match exactly with analytic ones. In addition, our results show that the optimum number of relays depend not only on channel conditions (operating SNRs) but also on modulation schemes which to be used.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권1호
• /
• pp.426-445
• /
• 2012

Conventional rate control (RC) schemes for H.264 video coding usually regulate output bit rate to match channel bandwidth by adjusting quantization parameter (QP) at fixed full frame rate, and the passive frame skipping to avoid buffer overflow usually occurs when scene changes or high motions exist in video sequences especially at low bit rate, which degrades spatial-temporal quality and causes jerky effect. In this paper, an active content adaptive frame skipping scheme is proposed instead of passive methods, which skips subjectively trivial frames by structural similarity (SSIM) measurement between the original frame and the interpolated frame via motion vector (MV) copy scheme. The saved bits from skipped frames are allocated to coded key ones to enhance their spatial quality, and the skipped frames are well recovered based on MV copy scheme from adjacent key ones at the decoder side to maintain constant frame rate. Experimental results show that the proposed active SSIM-based frameskip scheme acquires better and more consistent spatial-temporal quality both in objective (PSNR) and subjective (SSIM) sense with low complexity compared to classic fixed frame rate control method JVT-G012 and prior objective metric based frameskip method.

• 지역연구
• /
• 제10권1호
• /
• pp.39-52
• /
• 1994

This paper primarily aims to analyze the growth rate differentials of the economic activities in chung-Nam area. The research has been undertaken to find out the potentials of the economic activities and economic bases in the area. To analyze the economic potentials of the industries, the study employed the economic Growth Rate Differential Analysis by Henderson which is revised form of Shift-Share Analysis Methods. The research employed the employment data according to the standardized two-digit-classification-system during the period of 10 years from 1981 through 1991. The Growth Rate Differential Analysis calculates Total Growth Differentials which are dicomposed into two parts: Weight Part and Rate Part. Total Growth Differential can be calculated as the difference between national growth rate and regional growth rate by industry. The foundings are as follows: First, the economic bases of Chung-Nam area were found to be very weak, largely depending on primary industries such as agriculture and fisheries. Second, there was a great decline in urban industries in Tae Joeon, Cheon An and other cities over period of 1971-1981. It is strongly recommended that the planned items and products of each industrial complex must be reorgnized in a fashion to match those with high competitive power found in this research.

• 한국해안해양공학회지
• /
• 제12권4호
• /
• pp.168-180
• /
• 2000

In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.101-104
• /
• 2022

Mist-CVD is known to have advantages of low cost and high productivity compared to ALD and PECVD methods. It is capable of reacting to the substrate by misting an aqueous solution using ultrasonic waves under vacuum-free conditions of atmospheric pressure. In particular, Ga₂O₃ is regarded as advanced power semiconductor material because of its high quality of transmittance, and excellent electrical conductivity through N-type doping. In this study, Computational Fluid Dynamics were used to predict the uniformity of the thin film on a large-area substrate. And also the deposition pattern and uniformity were analyzed using the flow velocity and particle tracking method. The uniformity was confirmed by quantifying the deposition cross section with an FIB-SEM, and the consistency of the uniformity prediction was secured through the analysis of the CFD distribution. With the analysis and experimental results, the match rate of deposition area was 80.14% and the match rate of deposition thickness was 55.32%. As the experimental and analysis results were consistent, it was confirmed that it is possible to predict the deposition thickness uniformity of Mist-CVD.

• 정보관리학회지
• /
• 제24권4호
• /
• pp.53-72
• /
• 2007

본 연구에서는 12개의 표본 비디오 집단과 14명의 피조사자들을 이용하여 영상 초록 및 전체 클립 보기를 통한 색인어 및 요약문 추출의 정확도를 측정해 보았다. 측정결과 첫째, 비디오 유형에 따라 정확도가 차이가 있는 것으로 나타났으며 이는 이미지에 주로 의존하여 정보를 표출하는 비디오의 경우 텍스트 초록만으로 의미 파악을 하기에는 한계가 있으며 텍스트 초록이 영상 초록과 함께 사용되었을 때 시너지 효과를 낼 수 있음을 보여주고 있다. 둘째, 영상초록의 색인어 및 요약문 정확도가 전체 클립의 정확도 보다 떨어지지만 절반치에 근접한 것으로 나타나 영상 초록이 비디오 의미 추출에 효율적으로 활용될 수 있음을 확인하였다. 또한 영상 초록의 색인어 정확도(0.45)가 요약문 정확도(0.40) 보다더 높게 나타나 영상초록을 통해서 색인어 추출 작업을 더 효율적으로 할 수 있음을 확인할 수 있었다. 이러한 실험결과에 기초하여 영상 초록이 색인어 또는 요약문 추출 작업에 활용될 수 있을 뿐만 아니라, 디지털도서관 환경에서 텍스트 초록과 같은 다른 메타데이터 요소들과 함께 사용된다면 이용자의 적합성 판정을 좀 더 용이하게 할 것이며, 더 나아가 영상 질의의 매칭 자료로도 이용될 수 있음을 제안하였다. 끝으로 영상 초록의 품질을 높이기 위한 키프레임 추출 알고리즘 및 키프레임 배열 모형 설계 등 후속 연구에 대해서 제언하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1289-1294
• /
• 2003

This paper proposes a novel and efficient intelligent digital redesign technique for a Takagi-Sugeno (TS) fuzzy system. The term of intelligent digital redesign involves converting an existing analog fuzzy-model-based controller into an equivalent digital counterpart in the sense of state matching. In this paper, we suggest the discretization method based on the dual-rate sampling approximation is first proposed, and then attempt to globally match the states of the overall closed-loop TS fuzzy system with the pre-designed analog fuzzy-model-based controller and those with the digitally redesigned fuzzy-model-based controller. To show the feasibility and the effectiveness of the proposed method, a computer simulation is provided.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 추계 학술대회 학술발표 논문집
• /
• pp.129-132
• /
• 2003

This paper proposes a novel and efficient intelligent digital redesign technique for a Takagi-Sugeno (TS) fuzzy system. The term of intelligent digital redesign involves converting an existing analog fuzzy-model-based controller into an equivalent digital counterpart in the sense of state matching. In this paper, we suggest the discretization method based on the dual-rate sampling approximation is first proposed, and then attempt to globally match the states of the overall closed-loop TS fuzzy system with the pre-designed analog fuzzy-model-based controller and those with the digitally redesigned fuzzy-model-based controller. To show the feasibility and the effectiveness of the proposed method, a computer simulation is provided.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.210-216
• /
• 1998

The most important thing to consider in cold store design are to save cooling energy consumption and to keep goods freshly. Specially there are many efforts to save energy with cold store in Korea. A building energy simulation program should be used to optimally select a cooling system to match the criteria of cooling rate and storage rate in a given cool crop storage building and HVAC system. The low maintenance costs, high degree of safety and environmental impacts are also favouring the underground solution. There are obviously a lot of possibility for cost-effective storage of cooled or frozen goods or liquids in ground water rock.