• 제목/요약/키워드: Mat Foundation

검색결과 131건 처리시간 0.025초

매스 콘크리트의 적정 타설높이 산정을 위한 수화열 해석 (Hydrate Heat Analysis for the Determination of Optimized Thickness in Mass Concrete)

  • 신성우;이광수;유석형;김선호;황동규;박기홍
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.385-390
    • /
    • 2001
  • The thermal crack in mass concrete is mainly due to the difference of concrete temperature, which is generated by hydration heat of cement. As the thickness of mat foundation increases, the difference of temperature becomes bigger. The purpose of this study is to estimate the optimum placing depth. The temperature of real mat foundation was observed and the thermal analysis by Finite Element Method was executed. Finally, the crack index according to the placing depth was estimated.

  • PDF

기초의 uplift를 고려한 건축구조물의 동적해석 (Dynamic Analysis of Building Structures with Foundation Uplift)

  • 이동근;송윤환
    • 전산구조공학
    • /
    • 제1권1호
    • /
    • pp.103-112
    • /
    • 1988
  • 본 연구에서는 기초의 uplift의 영향을 고려하여 지진하중에 대한 건축구조물의 동적 거동을 예측하는 효율적인 방법을 제안하였다. 기초와 지반의 관계에 대한 모델에는 Winker 모델과 Two-Spring 모델이 있다. Winker 모델에 의한 해석방법은 정확하기는 하나 계산 시간이 오래 걸리고 복잡하다는 단점이 있다. 본 연구에서 Winker 모델을 보다 정확하게 나타낼 수 있고 해석이 간편하며 효율적인 등가 Two-Spring 모델(S-모델)을 제안하였다. S 모델은 기초에 정적하중이 작용했을 때의 기초 중앙의 모멘트와 회전각의 비선형 관계를 간단한 5개의 선형적인 관계로 나타냄으로써 유도되며, S모델에 의한 동적해석 결과는 Winker 모델에 의한 해석 결과와 잘 일치하였다.

  • PDF

중진지역 건축물의 묻힌온통기초에 작용하는 토압과 말 뚝변위에 대한 지진해석 (Seismic Analyses of Soil Pressure against Embedded Mat Foundation and Pile Displacements for a Building in Moderate Seismic Area)

  • 김용석
    • 한국지진공학회논문집
    • /
    • 제21권1호
    • /
    • pp.69-76
    • /
    • 2017
  • Seismic analyses of a pile under a large rigid basement foundation embedded in the homogeneous soil layer were performed practically by a response displacement method assuming a sinusoidal wave form. However, it is hard to take into account the characteristics of a large mat foundation and a heterogeneous soil layer with the response displacement method. The response displacement method is relevant to the 2D problems for longitudinal structures such as tunnel, underground cave structure, etc., but might not be relevant with isolated foundations for building structures. In this study, seismic pile analysis by a pseudo 3D finite element method was carried out to compare numerical results with results of the response displacement method considering 3D characteristics of a foundation-soil system which is important for the building foundation analyses. Study results show that seismic analyses results of a response displacement method are similar to those of a pseudo 3D numerical method for stiff and dense soil layers, but they are too conservative for a soft soil layer inducing large soil pressures on the foundation wall and large pile displacements due to ignored foundation rigidity and resistance.

초고층 건축물의 대형기초 설계 사례 (A Case Study of The Design of Mega Foundations for High-rise Buildings)

  • 김성호;홍승현;홍사면;최용규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2007년 가을학술발표회
    • /
    • pp.55-77
    • /
    • 2007
  • Currently a large number of high rise building projects are under plan and a mega foundation system to support this high load with safety is requiring. The foundation of a highrise building is displaced by the building load, which influence the behavior of a super structure in reverse. In this aspect, the structural interaction analysis between a foundation and a super structure is necessary. In this study, the relationship of a superstructure of building and a foundation has been reviewed, considering the tendency of design from a capacity driven design to a performance design. Two different case studies have been introduced to help understand this relationship in more specific, the first case is the high rise building founded on a mat system on rock and the second is that on large diameter bored piles on soft ground condition.

  • PDF

초대형 매트기초 매스 콘크리트의 응결시간조정에 의한 온도균열저감 공법적용의 기초적 실험 (A Fundamental Test of Temperature Crack Reduction Method Application by Setting Time Control of Large-Scaled Mat Foundation Mass Concrete)

  • 한천구;이재삼;노상균
    • 한국건축시공학회지
    • /
    • 제9권3호
    • /
    • pp.95-101
    • /
    • 2009
  • Constructing large-scale mat foundation mass concrete is increasing for the stability of building structure, because a lot of high rise building are being built in order to make full use of limited space. However, It is of increasing concerns that because limited placing equipments, available job-site and systems for mass concete placement in construction field do not allow to place great quantity of concrete at the same time in large scale mat foundation, consistency between placement lift can not be secured. And also, it is likely to crack due to stress caused by the difference of hydration heat generation time. To find out the solution against above problems, this study is to reconfirm the performance of normal concrete designed by mix proportion and super retarding concrete. The Fundamental test shows what happens if low heat proportioning and control method of setting time are applied at the job-site of newly constructed high rise building. The test result show that slump flow of concrete has been somewhat increased as the target retarding time gets longer, while the air content has been slightly decreased but this is no great difference from normal concrete. The setting time shows to be retarded as target retarding time gets longer, the range of retarding time increases. It is necessary to increase the amount of mix of super retarding agent in the proportion ration by setting curing temperature high since outdoor curing is about 6 hours faster than standard curing, which means the temperature of the concrete will be higher than the temperature of the surrounding environment, due to its high hydration heat when applying in a construction site. The compressive strength of super retarding concrete appears to be lower than normal concrete due to the retarding action in the early stage. However, as the time goes by, the compressive strength gets higher, and by the 28th day the strength becomes the same or higher than normal concrete.

동절기 매트기초공사시 콘크리트의 초기동해방지 및 온도충격제어에 관한 해석적 연구 (An Analytic Study on Early aged Freezing Damage Prevention and Thermal Crack Control of Concrete in Cold-Weathering Mat Foundation Construction)

  • 이도범;김효락;박지훈;최일호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.807-812
    • /
    • 2001
  • This study is peformed for checking the limitation and application of each curing/heating methods on cold-weathering mat foundation construction, considering temperature control, early strength security and temperature declination range limit, by means of concrete material properties and thermal analysis technique that were published previously. In the result of this analysis, we checked the open air temperature and mat depth that are possible to apply each curing/heating methods on cold-weathering construction and found curing/heating time of each methods that is able to prevent early aged freezing damage and thermal crack

  • PDF

이중버블시트를 적용한 매트 기초콘크리트의 부위별 온도이력 특성 (Characteristics of Temperature History at Each Section of Mat Foundation Concrete Applying Double Bubble Sheets)

  • 김태청;김종;전충근;신동안;오선교
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2016년도 춘계 학술논문 발표대회
    • /
    • pp.13-14
    • /
    • 2016
  • This study is aimed to analyze temperature history at each section of mat foundation concrete applying double bubble sheets. The results of the study are as follows. Firstly, the results of measuring the temperature history indicate that the lowest external temperature has been recorded at -5.6℃ for the three-day measurement period. For the central section, the result indicates that the lower, center and upper part have all secured the concrete curing temperature of 18℃ or higher. This results are believed to have resulted from excellent heat insulation performance of double bubble sheets. For the edge section between the edge form and the concrete interface, the temperature has been measured, on average, approximately 12℃ lower than the central section. However, all measured sections have indicated the temperature of 5℃ or higher. Meanwhile, an analysis has been conducted through the estimation equation of compressive strength of maturity during the curing period in order to examine the possibility of early frost damage and the aspect of securing strength. It has been confirmed that the compressive strength is higher than 50°D·D, namely, 5MPa, on the 3rd day of the aging process, which allows early frost damage to be avoided.

  • PDF

해성점토지반에 설치된 지오텍스타일의 거동 관측을 위한 계측 (Instrumentations for the Behaviour Observation of the Geotextile on Marine Clayey Grounds)

  • 조성민;장용채
    • 한국항만학회지
    • /
    • 제14권4호
    • /
    • pp.463-473
    • /
    • 2000
  • Reinforcement with geotextiles have been used in the foundation soil to enhance the resistance of embankments to avoid failure through excessive deformation or shear in the foundation. It is improtant to know the amount of the strain and the displacement of buried geotextiles for the verification of the reinforcement behaviour. Full scale trial constructions were performed to check the deformational characteristics of the polyester(PET) mat which was used for the embankment reinforcement. Many instrumentation equipments including surface settlement plates, profile gauges and inclinometer casings were installed to observe the behaviour of the soft ground due to the soil embankment. 60 electrical resistance strain gauges and 9 vibrating wire LVDTs were installed 세 measure the deformation of the polyester mat. Results of various tests and geotextile, waterproofing and protection from the hazard environments were introduced. The proposed instrumentation method was effective for the monitoring or the geotextile behaviour. The direct attachment of electrical resistance strain gauges on the gertextile mat was able to measure small changes of the strain of geotextiles. At the end of the 5 month monitoring, 54 of 60 (93%) strain gauges and 7 of 9 (78%) displacement transducers survived all perils of the compaction impacts and the humidity. And the tensile strain of grotextiles increased as the ground displacement became larger. Though the observed strain of mats under the 3m high embankment load was less than 1%, the magnitudes of the strain according to the mat spreading method were different from each other.

  • PDF

시멘트 종류 변화에 따른 콘크리트의 온도 및 응결시간 비교분석 (Comparative Analysis of Temperature and Setting Time of Concrete According to Types of Cements)

  • 최윤호;김상민;현승용;김종;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 가을 학술논문 발표대회
    • /
    • pp.29-30
    • /
    • 2020
  • In this study, as part of the foundation for advancing the material compounding aspect to reduce hydration heat cracks in the mat foundation on which the mass concrete is constructed, the degree of concrete varieties of cement is used. The setting time was measured and comparative analysis was performed. Results It was confirmed that the concrete using LHC was more effective than the concrete using OPC in reducing the use of SP, the calorific value of the concrete was low, and it was more effective in preventing cracks. It is also terminated after 10 hours and it is determined that the use of LHC can reduce the cracks caused by the heat of hydration of the mat foundation.

  • PDF

원심모형실험을 활용한 점토지반에 설치된 하이브리드 석션 버켓기초의 수평방향 지지력 평가 (Bearing Capacity Evaluation of Hybrid Suction Bucket Foundations on Clay Under Horizontal Loads Using a Centrifuge)

  • 김재현;이철주;신희정;김성환;구정민;정충열;전영진
    • 한국지반공학회논문집
    • /
    • 제39권12호
    • /
    • pp.61-73
    • /
    • 2023
  • 석션 버켓(suction bucket)은 해양 구조물 지지를 위해 사용되는 기초구조물 중 하나로 펌프를 이용해 빠르게 기초 시공이 가능한 장점이 있다. 최근 기초 지지력을 효과적으로 증가시키고 건설 비용을 절감하기 위해 단일 석션 버켓이나 다수의 석션 버켓이 매트기초와 결합된 하이브리드 석션 버켓기초(hybrid suction bucket foundation)가 제안되었다. 하지만 현재까지 수중구조물과 같이 작은 수직하중(자중)과 모멘트 하중 조건에서 수평하중에 대한 하이브리드 석션 버켓기초의 저항 메커니즘과 지지력에 관한 실험적 연구가 부족한 실정이다. 따라서, 본 연구에서는 점토지반에 설치된 하이브리드 석션 버켓기초의 수평방향 저항 메커니즘과 지지력을 평가하기 위해 하중재하시스템을 구축하고 원심모형실험을 수행하였다. 본 연구에서는 원형매트와 단일 버켓이 결합된 하이브리드 석션 버켓기초와 사각형 매트와 4개의 버켓기초가 결합된 하이브리드 그룹 석션 버켓기초를 대상으로 하였다. 본 연구를 통해 매트기초와 석션 버켓기초의 스커트(skirt) 길이가 수평방향 지지력 증진에 미치는 영향을 실험적으로 평가하였다. 그 결과, 작은 수직하중과 모멘트 하중조건에서 하이브리드 석션 버켓기초의 매트와 버켓기초 스커트가 기초의 수평방향 지지력 증진에 효과가 있음을 확인하였다.