• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.15-25
• /
• 2007

This paper aims at testing the applicability of RFID (radio frequency identification) based link travel time estimation algorithm in urban street settings in Jeju island Korea. For this, we developed algorithm and compared link travel times derived from the RFID probe based algorithm with those from (already available) GPS based link travel time estimation algorithm and with the actual link travel times from survey. RFID readers are composed of master reader and slave reader and the participating passenger cars were supposed to be equipped with RFID tag inside the vehicle. The data were sent to traffic information center and we used those data in comparison. The algorithm produced link travel times in a successful manner and the accuracy of those link travel times was about 88%. For the same link segments, the accuracy of GPS based link travel times was 93%. The t-test showed that both RFID and GPS based link travel times were not different in accuracy from statistical point of view. The applicability of RFID was tested successfully and the algorithm proposed seemed to be used in similar urban settings. Some limits and future research agenda have also been presented.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1141-1141
• /
• 2001

The aim of the study was to evaluate the performance of 3 calibration methods, modified partial least squares (MPLS), local PLS (LOCAL) and artificial neural network (ANN) on the prediction of chemical composition of forages, using a large NIR database. The study used forage samples (n=25,977) from Australia, Europe (Belgium, Germany, Italy and Sweden) and North America (Canada and U.S.A) with information relative to moisture, crude protein and neutral detergent fibre content. The spectra of the samples were collected with 10 different Foss NIR Systems instruments, which were either standardized or not standardized to one master instrument. The spectra were trimmed to a wavelength range between 1100 and 2498 nm. Two data sets, one standardized (IVAL) and the other not standardized (SVAL) were used as independent validation sets, but 10% of both sets were omitted and kept for later expansion of the calibration database. The remaining samples were combined into one database (n=21,696), which was split into 75% calibration (CALBASE) and 25% validation (VALBASE). The chemical components in the 3 validation data sets were predicted with each model derived from CALBASE using the calibration database before and after it was expanded with 10% of the samples from IVAL and SVAL data sets. Calibration performance was evaluated using standard error of prediction corrected for bias (SEP(C)), bias, slope and R2. None of the models appeared to be consistently better across all validation sets. VALBASE was predicted well by all models, with smaller SEP(C) and bias values than for IVAL and SVAL. This was not surprising as VALBASE was selected from the calibration database and it had a sample population similar to CALBASE, whereas IVAL and SVAL were completely independent validation sets. In most cases, Local and ANN models, but not modified PLS, showed considerable improvement in the prediction of IVAL and SVAL after the calibration database had been expanded with the 10% samples of IVAL and SVAL reserved for calibration expansion. The effects of sample processing, instrument standardization and differences in reference procedure were partially confounded in the validation sets, so it was not possible to determine which factors were most important. Further work on the development of large databases must address the problems of standardization of instruments, harmonization and standardization of laboratory procedures and even more importantly, the definition of the database population.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.141-149
• /
• 2020

This study was undertaken to analyze the intervening effect of nursing simulation among nursing students. This was a critical review study, and data obtained were reviewed using various data bases, including RISS, KISS, NDSL, DBpia, and KRI. The terminologies entered in the data base were nursing and simulation. Selected studies were assessed for methodological quality; and narrative, descriptive or one group post-test studies were excluded from the analysis. Ed. Notes: Please review for accuracy. I have suggested the edit to the best of my understanding. Finally, 234 studies were included for investigation. Results included studies of nursing simulation intervention in Korea, commencing from 2008. One group pre-post test and two group post test were more designed in journals comparing to master thesis or doctoral dissertation. Clinical practice was the most frequently studied aspect by both the assessor and student in the two groups' pre-post test design. Nursing competences associated with dependent variables during simulation were integrated skills, critical thinking, communication, cooperation, professional recognition and leadership. The two groups pre-post design explored more varied competences as compared to other designs. Considering the results obtained, we conclude that simulation intervention is an effective teaching method for nursing students to help improve their clinical practice. However, further studies are required to assess the impact of critical thinking and problem solving.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.431-441
• /
• 2003

This paper presents the design of 32 bit microprocessor for a sequence control using a field programmable gate array(FPGA). The microprocessor was designed by a VHDL with top down method, the program memory was separated from the data memory for high speed execution of sequence instructions. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 32 bits. And the real time debug operation was implemented for easeful debugging the designed processor with a single step run, PC break point run, data memory break point run. Also in this designed microprocessor, pulse instructions, step controllers, master controllers, BM and BCD type arithmetic instructions, barrel shift instructions were implemented for sequence logic control. The FPGA was synthesized under a Xilinx's Foundation 4.2i Project Manager using a V600EHQ240 which contains 600,000 gates. Finally simulation and experiment were successfully performed respectively. For showing good performance, the designed microprocessor for the sequence logic control was compared with the H8S/2148 microprocessor which contained many bit instructions for sequence logic control. The designed processor for the sequence logic showed good performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.139-147
• /
• 2019

This study examined the level of knowledge, perception, and attitude related to personal protective equipment (PPE) of acute respiratory infection, and their relationship on nursing students. The participants were 200 nursing students of the 3rd and 4th grade in hospital practice. Data were collected from September 1 to October 15, 2018. The knowledge, perception, and attitude related to PPE were measured by structured questionnaires. Data were analyzed by descriptive statistics, one-way ANOVA, independent t-test, and Pearson correlation. From the results, knowledge score related to PPE was 17.83 out of 20 points, and perception score related to PPE was 3.68 out of 5 points, and attitude score related to PPE was 4.14 out of 5 points. Therefore, knowledge and attitude level were higher than average. Perception level was moderate. And attitude related to PPE was positively correlated with knowledge and perception. These study findings can be used as basic data for developing an effective infection control educational program to enhance the correct knowledge, perception, and positive attitude related to use of PPE for nursing students. Also, it will be necessary to provide nursing students with the equipment and related resources to master the use of PPE.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.7 no.2
• /
• pp.285-297
• /
• 2001

The rapid changes in graduate nursing curriculum have resulted in many challenges to the contents in masters and doctoral program of nursing. In order to meet the changing consumer demand, to respond the specialization in clinical practice and to reflect the evolving trend in the discipline and science of nursing, this study focussed on analyzing the present graduate nursing curriculum of one college of nursing in Seoul, Korea. In order to analyze the present curriculum, data were collected by survey from the enrolled graduate students, And curriculum contents of 10 graduate nursing curricula in Korea and 6 in United States were analyzed through internet information. Based on the data from the enrolled students' responses on educational goal and objectives and divisions of nursing and the data from the graduate curriculums of other universities both in Korea and United States suggested the future direction of graduate nursing curriculum of S university as follows; It is required that theoretical development, as well as education of enhancing clinical competences and preparation of specialization, innovative work for the change and global nursing should be included in the curriculum. Majority of respondents were agreed with 6 division of nursing(Adult nursing ,Maternity nursing ,Pediatric nursing, Community nursing, Nursing administration) and the integration of nurse clinical specialist course(such as oncology nursing specialist) into the regular courses in Master and Doctorate program was required.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.5
• /
• pp.526-546
• /
• 2001

Fiber-reinforced composite(FRC) was developed as a structural component for dental appliances such as prosthodontic framework. FRC provides the potential for fabrication of a metal-free, excellent esthetic prostheses. It has demonstrated success as a result of its simple fabrication, natural colour, and marginal integrity, and fracture resistance of veneering composite resin and the FRC material. Although it has lots of merits, clinical and objective data are insufficient. The purpose of this study was to evaluate the fracture strength and the marginal fitness of fiber reinforced composite bridge in the posterior region for clinical application. Sixteen bridges of each group. $Targis/Vectris^{(R)}$, $Sculpture-Fibrekor^{(R)}$, and In-Ceram, were fabricated. All specimens were cemented with Panavia 21 to the master dies. Strength evaluation was accomplished by a universal testing machine (Instron). The marginal fitness was measured by using the stereoscope (${\times}50$). The results were as follows. : 1. The fracture strength according to the materials was significantly decreased in order In-Ceram($238.81{\pm}82$), Targis Vectris($176.25{\pm}18.93$), Sculpture-Fibrekor($120.35{\pm}20.08$) bridges. 2. FRC resin bridges were not completely fractured, while In-Ceram bridges were completely fractured in the pontic joint. 3. The marginal accuracy was significantly decreased in order Targis/Vectris ($60.71{\mu}m$), Sculpture-Fibrekor($73.10{\mu}m$) In-ceram Bridge ($83.81{\mu}m$). 4. The fitness of occlusal sites had a lower value than the marginal sites(P<0.001), and the marginal gaps of inner site of the pontic were greater than that of outer sites of the pontic. Fiber reinforced composite bridges are new, esthetic prosthesis and can be clinically used in anterior regions and short span bridges. However, caution must be exercised when extrapolating laboratory data to the clinical situation because there are no long term clinical data regarding the overall success of the FRC.

• Journal of the Health Care and Life Science
• /
• v.8 no.2
• /
• pp.83-93
• /
• 2020

In this study, a practical model for health information management education using the EMR education system at universities for nurturing health care information managers was studied. Currently, there is no practical training course for health care information management in the standards for evaluation and certification of health care information management education introduced to strengthen the job competency of health care information managers. Accordingly, the program was constructed so that the practice program suggested as an educational environment in the Health and Medical Information Management Education Evaluation and Certification Manual can be practiced in the EMR education system. In addition, a practical model that can be performed according to the on-site practice guidelines for health and medical information management for each program was studied. Using the health care information management education EMR system, master data management, patient registration, doctor prescription, medical cost calculation, health insurance claim management, form management, discharge registration, cancer registration, unrecorded management, health care data management, health care statistics, A practice model was studied so that practice on information protection/security management can be performed. It will be possible to play a role as a health care information management expert by raising the quality level of health care information management education through systematic and standardized health care information management practice courses at universities. Accordingly, it is necessary to cultivate health care information management experts who develop and manage medical services based on medical data analysis through practical training of health care information managers.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1339-1348
• /
• 2021

In accordance with the River Law, the basic river maintenance plan is established every 5-10 years with a considerable national budget for domestic rivers, and various river surveys such as the river section required for HEC-RAS simulation for flood level calculation are being conducted. However, river survey data are provided only in the form of a pdf report to the River Management Geographic Information System (RIMGIS), and the original data are distributedly owned by designers who performed the river maintenance plan in CAD format. It is a situation that the usability for other purposes is considerably lowered. In addition, when using surveyed CAD-type cross-sectional data for HEC-RAS, tools such as 'Dream' are used, but the reality is that time and cost are almost as close as manual work. In this study, RAUT (River Information Auto Upload Tool), a tool that can solve these problems, was developed. First, the RAUT tool attempted to automate the complicated steps of manually inputting CAD survey data and simulating the input data of the HEC-RAS one-dimensional model used in establishing the basic river plan in practice. Second, it is possible to directly read CAD survey data, which is river spatial information, and automatically upload it to the river spatial information DB based on the standard data model (ArcRiver), enabling the management of river survey data in the river maintenance plan at the national level. In other words, if RIMGIS uses a tool such as RAUT, it will be able to systematically manage national river survey data such as river section. The developed RAUT reads the river spatial information CAD data of the river maintenance master plan targeting the Jeju-do agar basin, builds it into a mySQL-based spatial DB, and automatically generates topographic data for HEC-RAS one-dimensional simulation from the built DB. A pilot process was implemented.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.93-101
• /
• 2001

In this paper, we propose an image downscaler used in multimedia video applications, such as DTV, TV-PIP, PC-video, camcorder, videophone and so on. The proposed image downscaler provides a scaled image of high-quality and high-performance. This paper will explain the scaling theory using two-dimensional digital filters. It is the method that removes an aliasing noise and decreases the hardware complexity, compared with Pixel-drop and Upsamling. Also, this paper will prove it improves scaling precisians and decreases the loss of data, compared with the Scaler32, the Bt829 of Brooktree, and the SAA7114H of Philips. The proposed downscaler consists of the following four blocks: line memory, vertical scaler, horizontal scaler, and FIFO memory. In order to reduce the hardware complexity, the using digital filters are implemented by the multiplexer-adder type scheme and their all the coefficients can be simply implemented by using shifters and adders. It also decreases the loss of high frequency data because it provides the wider BW of 6MHz as adding the compensation filter. The proposed downscaler is modeled by using the Verilog-HDL and the model is verified by using the Cadence simulator. After the verification is done, the model is synthesized into gates by using the Synopsys. The synthesized downscaler is Placed and routed by the Mentor with the IDEC-C632 0.65${\mu}{\textrm}{m}$ library for further IC implementation. The IC master is fixed in size by 4,500${\mu}{\textrm}{m}$$\times$4,500${\mu}{\textrm}{m}$. The active layout size of the proposed downscaler is 2,528${\mu}{\textrm}{m}$$\times$3,237${\mu}{\textrm}{m}$.