• 한국데이터정보과학회:학술대회논문집
• /
• 2005.10a
• /
• pp.117-134
• /
• 2005

본 연구에서는 우리나라 국방 분야의 신뢰성의 제고하기 위한 국방 신뢰성 Master Plan의 구축이 시급하다고 판단하여 우리나라 국방 분야의 신뢰성 업무를 종합하는 기본 계획서인 "국방 신뢰성 Master Plan"을 제안하고자 한다. 이를 통하여 소요제기단계부터 설계 및 개발 단계, 양산 및 유지정비보수 단계, 운용단계에 이르기까지 신뢰성을 적용할 수 있게 됨으로써 무기체계의 작전수행능력 제고는 물론, 무기체계의 성능향상, 무기체계의 개발기간 단축뿐만 아니라 막대한 비용 절감 효과가 기대된다. 또한 무기체계의 각 개발 단계의 주요시점마다 신뢰성의 개념을 적용함으로써 체계의 운용유지비용을 획기적으로 절감할 수 있을 것으로 기대되며, 국산무기체계의 국제경쟁력 향상을 통하여 경제발전에도 크게 기여할 것으로 전망된다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.720-726
• /
• 2004

The data transmission over MVB(Multifunction Vehicle Bus) of TCN(Train Communication Network) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard recommends the event-polling method as the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.586-589
• /
• 2001

This paper focuses on a method to connect mobile devices such as mobile robot, Automated Guided Vehicle(AGV) to a fieldbus. In this paper, the IEEE 802.11 wireless LAN is used to extend a Profibus-DP network for the mobile devices. In order to integrate these two networks, a protocol converter is developed with two process(i.e., master process of Profibus-DP and virtual master process of IEEE 802.11) and an transmission buffer. Futhermore, a virtual polling algorithm is developed at the protocol conveter in order to satisfy real-time requirements on data communication.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.1
• /
• pp.39-44
• /
• 2015

The fracture toughness of 2.25Cr-1Mo cast steel (SA217-WC9) samples which were taken from the check valves of feed water piping of Korean Standard Nuclear Power Plant(KSNPP) was measured by Master Curve method. The measured $T_0$ reference temperature of SA217-WC9 steel was $-30^{\circ}C$. The obtained $T_0$ was compared to the derived value from Charpy impact test data following to SINTEP procedure. The heat-to-heat variation in fracture toughness of SA217-WC9 steel was observed. It was found that the low toughness of a heat of SA217-WC9 steel was attributed to the coarse MnS inclusion originated by high sulfur content as the results of microanalyses.

• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.419-427
• /
• 2009

Methodology and application of Strategic Environmental Assessment (SEA) for policies, plans, and programs are still new approach in Vietnam. With a support from Vietnam-Swedish Project (SEMLA) and Ministry of Natural Resources and Environment (MONRE), SEA for the Tonkin Gulf Coastal Economic Belt Development Plan was conducted in 2008. Lessons obtained from this SEA may contribute to improving methods and practicing SEAs for regional development. The main lessons summarized in this paper are: (i) close cooperation between the planning and environmental teams from the beginning phase of a master plan; (ii) SEA should focus not only on impacts to the natural environment but also on main issues of socio-economic aspects; (iii) approaches and methods used in SEA should be appropriate to properly predict the impacts at regional-levels and cumulative impacts; (iv) a good SEA study may be achieved when detailed data on the environment and socio-economy of the study area are available and have active engagement of stakeholders, including project affected sectors, ecologists, planners, policy makers, etc. This paper is useful for whom, those work in SEA in regional development.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.642-648
• /
• 2008

In order to analyze the causes of fossil power plant facilities due to a degradation and corrosion, artificial degraded materials composed of the facilities were manufactured. Various experiment were performed based on mechanical test, microstructure observation, hardness test, electrochemical potentiokinetic reactivation test(EPR) and corrosion scale thickness measurement test. The master curves were write out using Larson-Miller parameter to evaluate the degree of degradation with the above diagnosis methods. These data were applied to materials database of fossil power plant diagnosis. Finally expert system on the fossil power plant diagnosis was developed using the master curves and diagnosis algorithms.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.469-471
• /
• 2006

This paper describes a efficient insepction method of PCB PADs for AFVI. The methods for PCB inspection have been tried to detect the defects in PCB PADs, but their low detection rate results from pattern variations that are originating from etching, printing and handling processes. The adaptive inspection method has been newly proposed to extract minute defects based on dynamic segments and filters. The vertexes are extracted from CAM master images of PCB and then a lot of segments are constructed in master data. The proposed method moves these segments to optimal directions of a PAD contour and so adaptively matches segments to PAD contours of inspected images, irrespectively of various pattern variations. It makes a fast, accurate and reliable inspection of PCB patterns. Experimental results show that proposed methods are found to be effective for flexible defects detection.

• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.355-365
• /
• 2000

The interferometric correlation, or coherence, is calculated to measure the variance of the interferometric phase and amplitude within the neighbourhood of any location within the image at a result of SAR (Synthetic Aperture Radar) interferometric process which utilizes the phase information of the images. The coherence contains additional information that is useful for detecting point targets which change their location in an area of interest (AOI). In this research, a RGB colour composite image was generated with a intensity image (master image), a intensity change image as a difference between master image and slave image, and a coherence image generated as a part of SAR interferometric processing. We developed a technique performing detection of a point target movement using SAR interferometry and applied it to suitable tandem pair images of ERS-1 and ERS-2 as test data. The possibility of change detection of a point target in the AOI could be identified with the technique proposed in this research.

• International Journal of Contents
• /
• v.15 no.2
• /
• pp.13-19
• /
• 2019

This research demonstrates a clear visual outline of character influence-relations in creating Jungian character archetypes in films using R computational technology. It contributes to the integration of Jungian analytical psychology into film studies by revealing character network relations in film. This paper handles character archetypes and their influence on developing other character archetypes in films in regards to network analysis drawn from Lynn Schmidt's analysis of 45 master characters in films. Additionally, this paper conducts a character network analysis visualization experiment using R open-source software to create an easily reproducible tutorial for scholars in humanities. This research is a pioneering work that could trigger the academic communities in humanities to actively adopt data science in their research and education.

• Journal of Digital Contents Society
• /
• v.19 no.5
• /
• pp.963-969
• /
• 2018

Wi-Fi and Bluetooth technologies are perhaps the most prominent examples of wireless communication technologies used in the Internet of Things (IoT) environment. Compared to widely used Wi-Fi, Bluetooth technology has some flaws including 1:1 connection (one-way) between Master and Slave, slow transmission, and limited connection range; Bluetooth is mainly used for connecting audio devices. Since the release of Bluetooth Low Energy (BLE), some of the flaws of Bluetooth technology have been improved but it still failed to become a competitive alternative of Wi-Fi. This paper presents a method of data transmission through broadcasting in BLE and demonstrates its performance, one-to-many data transfer result. The Connection-Free Data Transmission proposed in this paper will hopefully be utilized in special circumstances requiring 1:N data transmission or disaster security network.